Convectuoso Posted July 26, 2021 Share Posted July 26, 2021 Quote Link to comment Share on other sites More sharing options...
eggy99 Posted July 26, 2021 Share Posted July 26, 2021 I'd much prefer a standard all plastic figure from their standard line over the deluxe figure with fabric. I will admit that the face sculpt is an improvement over the current Rick Hunter figure. Quote Link to comment Share on other sites More sharing options...
sh9000 Posted July 26, 2021 Share Posted July 26, 2021 The sign that said $899 HKD might be for bonus items because this sign says $499 HKD which is about $64 USD. Pics from FB. Quote Link to comment Share on other sites More sharing options...
CoryHolmes Posted July 27, 2021 Share Posted July 27, 2021 On 7/25/2021 at 8:45 AM, sh9000 said:  From FB. I'm not normally one for the coloured mecha, but those Max and Miryia Super VF-1s are look niiiiice Quote Link to comment Share on other sites More sharing options...
sh9000 Posted August 4, 2021 Share Posted August 4, 2021 https://www.kitzconcept.com/index.php?route=product/product&product_id=85 Quote Link to comment Share on other sites More sharing options...
Roy Focker Posted August 4, 2021 Share Posted August 4, 2021 Thought I was done with their figures but the quality increase with little Roy impressed me enough to continue with them. I really like the look of this figure but concerned how a soft good figure would look next to non-soft good figs. Quote Link to comment Share on other sites More sharing options...
no3Ljm Posted August 4, 2021 Share Posted August 4, 2021 32 minutes ago, Roy Focker said: Thought I was done with their figures but the quality increase with little Roy impressed me enough to continue with them. I really like the look of this figure but concerned how a soft good figure would look next to non-soft good figs. Worry not because they're probably going to remake all the previous releases down the line and make them soft good.  Quote Link to comment Share on other sites More sharing options...
Tober Posted August 4, 2021 Share Posted August 4, 2021 Macross Advanced Figure Series Rick Hunter 1/12 Scale Figure is up for pre-order 0on BBTS for $99.99. link Quote Link to comment Share on other sites More sharing options...
technoblue Posted August 4, 2021 Share Posted August 4, 2021 I’m not feeling this one. For now, I’ll pass. Quote Link to comment Share on other sites More sharing options...
DarkArchon3000 Posted August 4, 2021 Share Posted August 4, 2021 I would have also preferred all plastic instead of cloth but the face does look better than previous release. This should look good next to the DX VF-1D and fan racer. Order placed. Quote Link to comment Share on other sites More sharing options...
mantisfists Posted December 17, 2021 Share Posted December 17, 2021 Facebook page says that if support is good, a Spartan would come as well. Â Odd that they'd release just three of the Destroids. Â Of course, their GBP armor was supposed to release in September of this year.......still waiting. Â It will be interesting to see what light up features and gimmicks they'll include, though. Quote Link to comment Share on other sites More sharing options...
tekering Posted December 17, 2021 Share Posted December 17, 2021 (edited) 41 minutes ago, mantisfists said: Facebook page says that if support is good, a Spartan would come as well. A Spartan would be most welcome, since Wave never produced one. There are mass-produced injection-molded kits from Bandai and Wave far superior to the Kitz Concept models depicted above, however... ...although I guess this is still good news for the toy-only collectors. Edited December 17, 2021 by tekering Quote Link to comment Share on other sites More sharing options...
Corrinald Posted December 17, 2021 Share Posted December 17, 2021 I doubt we will really see them next year. Their releases are always 6+ months behind the initial dates announced. Maybe some prototypes will be shown in summer. That being said it will be cool to have these in 1/72 scale. They also said in some Facebook comments that the VF-1 has been modified even further. Curious to see what they have done with it now Quote Link to comment Share on other sites More sharing options...
no3Ljm Posted December 17, 2021 Share Posted December 17, 2021 6 hours ago, mantisfists said:  It will be interesting to see what light up features and gimmicks they'll include, though. "Pew pew" sound effects maybe?  Quote Link to comment Share on other sites More sharing options...
Sanity is Optional Posted December 17, 2021 Share Posted December 17, 2021 9 hours ago, mantisfists said: Facebook page says that if support is good, a Spartan would come as well. Â Odd that they'd release just three of the Destroids. Â Of course, their GBP armor was supposed to release in September of this year.......still waiting. Â It will be interesting to see what light up features and gimmicks they'll include, though. Kinda makes sense that Spartan would be the last one to come. The other 3 Desdroids all share the entire bottom half, reducing the number of unique molds and the design work required. The Regult also shares a lot with possible missile/scout variants, plus being an enemy mecha which (in the US) means army-building. Quote Link to comment Share on other sites More sharing options...
twich Posted December 18, 2021 Share Posted December 18, 2021 I am all for encouraging Kitzconcept to further refine their 1/72 VF-1, and would greatly enjoy these readily available, since we are not likely to see Bandai/Arcadia VF-1 designs as part of the World Wide Macross initiative. I would really like to acquire myself the VF-1J Rick and the new VF-1S Fokker custom that should be coming out soon. Twich Quote Link to comment Share on other sites More sharing options...
Podtastic Posted December 18, 2021 Share Posted December 18, 2021 On 12/17/2021 at 12:54 PM, mantisfists said: It will be interesting to see what light up features and gimmicks they'll include, though Aren't you thinking of Kidslogic? I know they're into those expensive and totally unnecessary gimmicks. 15 hours ago, Sanity is Optional said: The Regult also shares a lot with possible missile/scout variants, plus being an enemy mecha which (in the US) means army-building. In, but not limited to, the US. Quote Link to comment Share on other sites More sharing options...
jenius Posted December 18, 2021 Share Posted December 18, 2021 KC also has light up features in their toys. Quote Link to comment Share on other sites More sharing options...
jvmacross Posted January 11, 2022 Share Posted January 11, 2022 Anyone else receive the email from KC regarding the shipment for the VF-1S Roy V 2.0 and the VF-1S Rick V 2.0? In the email they say mention airmail to the US and a select other countries has been suspended, leaving only surface mail as an option.  Dear Customer, The first batch of our 1/72 VF-1S is expected to be available before Chinese New Year Holidays. Initially, we are going to have the Rick version only.  We received many feedbacks requesting to have Roy version instead.  So, we decided to produce a smaller quantity of 1-S Roy after 1-S Rick.  However, our factory has made a mistake which may be a good news to you.  They mixed up the quantity and the sequence and now, VF-1S Roy is in production and the Rick Version will be in Feb after CNY holidays. Please let us know whether you will change your order to 1S Roy.  We would like to arrange for the collection of the balance too.  Before we send the invoice, please double check your delivery information.   It will be very kind of you if you can repeat it in your reply. Lastly, for the shipments to Australia, Canada, Mexico and USA, our Post Office has suspended all airmail services, including Speedpost to these countries from 1 Jan 2022.  The only alternative is by Surface Mail which we don't recommend as it takes more than 4 months for delivery.  We will wait and send out the parcel immediately when the services are resumed. Look forward to your reply. Regards, Kitzconcept Ltd Quote Link to comment Share on other sites More sharing options...
Convectuoso Posted January 11, 2022 Share Posted January 11, 2022 I got that too Quote Link to comment Share on other sites More sharing options...
Convectuoso Posted January 12, 2022 Share Posted January 12, 2022 It looks like they're reissuing their VF-1S Quote Link to comment Share on other sites More sharing options...
Corrinald Posted January 12, 2022 Share Posted January 12, 2022 I got the email about the VF-1S Rick/Roy too and the balance invoice for them. Went with the surface Mail because I am not paying any higher shipping fees. Curious to see if these have further changes to them based on their Facebook page comments Looks like my reissue VF-1J and Heavy Armor just shipped too. Quote Link to comment Share on other sites More sharing options...
jvmacross Posted January 12, 2022 Share Posted January 12, 2022 I asked KC and the new VF-1S Roy 2.0 will have a redesigned head sculpt...so looking forward to seeing the new pics....not sure if both the VF-1S Roy and Hikaru have any additional tweaks to the 2.0 mold...definitely will be replacing my floppy VF-1S 1.0 Quote Link to comment Share on other sites More sharing options...
Mechapilot77 Posted January 12, 2022 Share Posted January 12, 2022 (edited) On 1/11/2022 at 9:27 AM, jvmacross said: Anyone else receive the email from KC regarding the shipment for the VF-1S Roy V 2.0 and the VF-1S Rick V 2.0? In the email they say mention airmail to the US and a select other countries has been suspended, leaving only surface mail as an option.  Dear Customer, The first batch of our 1/72 VF-1S is expected to be available before Chinese New Year Holidays. Initially, we are going to have the Rick version only.  We received many feedbacks requesting to have Roy version instead.  So, we decided to produce a smaller quantity of 1-S Roy after 1-S Rick.  However, our factory has made a mistake which may be a good news to you.  They mixed up the quantity and the sequence and now, VF-1S Roy is in production and the Rick Version will be in Feb after CNY holidays. Please let us know whether you will change your order to 1S Roy.  We would like to arrange for the collection of the balance too.  Before we send the invoice, please double check your delivery information.   It will be very kind of you if you can repeat it in your reply. Lastly, for the shipments to Australia, Canada, Mexico and USA, our Post Office has suspended all airmail services, including Speedpost to these countries from 1 Jan 2022.  The only alternative is by Surface Mail which we don't recommend as it takes more than 4 months for delivery.  We will wait and send out the parcel immediately when the services are resumed. Look forward to your reply. Regards, Kitzconcept Ltd I did NOT get the above roy/rick e-mail but did get this on 12/31, 10 days after payment in full for the rick 1/72 vf-1j. " Dear Customer, We just got the following press release from our Post Office informing that all airmail services, including Speedpost to your country is suspended from 1 Jan 2022. https://www.hongkongpost.hk/en/about_us/whats_new/press_release/index_id_823.html The only alternative is by Surface Mail which we don't recommend as it takes more than 4 months for delivery.  We will wait and send out the parcel immediately when the services are resumed. Thank you again for your support and patience. Regards Kitzconcept Ltd"  The roy and rick e-mail does have me thinking its amateur hour at whatever factory is doing the work this time around. what ELSE are they going to screw up? they did mention they were using a different factory this time around to me earlier this year (in july they said the factory had cancelled their order last minute and they were looking for a new one) new factory promised to deliver in december and i guess this is the current factory that screwd up the sequence and quantity.  its all very concerning. also, no way we are seeing those destroids or regults in 2022. this vf-1j v2.0 i'm waiting for was supposed to be out january of 2021 originally, now its after CNY 2022. Edited January 12, 2022 by Mechapilot77 Quote Link to comment Share on other sites More sharing options...
Convectuoso Posted January 15, 2022 Share Posted January 15, 2022 https://fb.watch/ayHhKhAFuv/ Quote Link to comment Share on other sites More sharing options...
Corrinald Posted January 15, 2022 Share Posted January 15, 2022 I am not sure what the additional improvements they are describing are, but nice to see Max and Kakizaki 1A's! Quote Link to comment Share on other sites More sharing options...
sh9000 Posted January 15, 2022 Share Posted January 15, 2022 It would be a great time for Bandai to crank out their HMR VF-1A TV Max and Kakizaki. Quote Link to comment Share on other sites More sharing options...
jvmacross Posted January 15, 2022 Share Posted January 15, 2022 6 hours ago, Convectuoso said: https://fb.watch/ayHhKhAFuv/ Nice....wonder if they will be "exclusives" Definitely will get both to complete Vermillion Squadron Quote Link to comment Share on other sites More sharing options...
Convectuoso Posted January 16, 2022 Share Posted January 16, 2022 (edited) https://fb.watch/aA96QnsB2W/ They've added some English descriptions for the improvements Edited January 16, 2022 by Convectuoso Quote Link to comment Share on other sites More sharing options...
MKT Posted January 16, 2022 Share Posted January 16, 2022 Hmm with the new videos, are their upcoming VF-1 releases a V3? Or they are just explaining the V2 improvements compared to V1? Quote Link to comment Share on other sites More sharing options...
jvmacross Posted January 17, 2022 Share Posted January 17, 2022 Looks the same to me as the recently released VF-1J...still seems to have the gap issues with the connection of the intakes when in Gerwalk mode....no "shake" test performed when he had it in that mode.... Quote Link to comment Share on other sites More sharing options...
Toonz Posted January 17, 2022 Share Posted January 17, 2022 Does this mean they are printing two different names on the cockpit window frame on this 1S 2.0? Quote Link to comment Share on other sites More sharing options...
jvmacross Posted January 17, 2022 Share Posted January 17, 2022 yes.....one is a "Rick Hunter" VF-1S 2.0....the second is a new release of the VF-1S Roy as a v 2.0.....I remember asking them about it at the time the VF-1J was released and being told they had no plans....but based on their email message, I guess enough customers wanted a "better" VF-1S Roy than the floppy V 1.0 Quote Link to comment Share on other sites More sharing options...
Toonz Posted January 18, 2022 Share Posted January 18, 2022 20th January. Limited edition 180pcs. Quote Link to comment Share on other sites More sharing options...
Corrinald Posted January 18, 2022 Share Posted January 18, 2022 Nice! But man that's a small production run Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.