Sanity is Optional Posted September 28, 2018 Share Posted September 28, 2018 The battroid really has a bird-of-prey feel to it. Quote Link to comment Share on other sites More sharing options...
Slave IV Posted September 28, 2018 Share Posted September 28, 2018 1 hour ago, Saburo said: @seti88 here's Gerwalk Setup takes a bit longer for the shot and to also setup the hanger. Gerwalk mode has never looked better to me for the 19! I almost paid more attention to the Valk than the hanger this time. Quote Link to comment Share on other sites More sharing options...
spanner Posted September 29, 2018 Share Posted September 29, 2018 2 hours ago, Saburo said: @seti88 here's Gerwalk Setup takes a bit longer for the shot and to also setup the hanger. Mad shot mate!! Looks menacing in Gerwalk! Quote Link to comment Share on other sites More sharing options...
kanedaestes Posted September 29, 2018 Share Posted September 29, 2018 Mine is all good. Minor things of course that will be fixed through transformation but all in all I’m happy. Happy than with Arcadia’s Quote Link to comment Share on other sites More sharing options...
treatment Posted September 29, 2018 Share Posted September 29, 2018 ok. Transformed my dx-yf19 earlier. For a change, the manual on this DX YF-19 is actually in COLOR and also quite glossy paper this time. Unlike most (if not all) of the Bandai-manuals I usually find in my SOCs/RD/SRC/HMR/DX-Frontier/DX-Delta/etc toys. Anyway. transformation into Battroid wasn't really that hard nor complicated for someone who don't have the DX VF19Advanced nor the Arcadia YF-19. The most challenging part was the damn uber-tight hip-bars that you need to push and rotate to get the intakes above the cod-piece. I thought I was gonna pull an onnasake on it and break it completely. Then I realized, I ain't gonna get Bandai'd with this thing.. Got my precision screwdriver nearby and loosen up the damn screws. That helped. A LOT. My other gripes on it: I don't quite like how the wings are pretty much free-floating. There doesn't seem to be a locking mechanism or a damn tab to secure it. Also, I keep depressing the inner shins and that was triggering my ocd. The shield's kinda dorky, too. I'm way too meh on the ordnance accessories. The FP are a bit too dark for me. Other than that (and the canards being irritatingly non-anime-accurate when in fighter-mode), it's quite a nice YF-19 valk. I do wish Arcadia make a v3 of their 1/60 YF-19 to fix and clean up the shenanigans they did on their v2. Finally, some pictars! Quote Link to comment Share on other sites More sharing options...
spanner Posted September 29, 2018 Share Posted September 29, 2018 29 minutes ago, treatment said: ok. Transformed my dx-yf19 earlier. For a change, the manual on this DX YF-19 is actually in COLOR and also quite glossy paper this time. Unlike most (if not all) of the Bandai-manuals I usually find in my SOCs/RD/SRC/HMR/DX-Frontier/DX-Delta/etc toys. Anyway. transformation into Battroid wasn't really that hard nor complicated for someone who don't have the DX VF19Advanced nor the Arcadia YF-19. The most challenging part was the damn uber-tight hip-bars that you need to push and rotate to get the intakes above the cod-piece. I thought I was gonna pull an onnasake on it and break it completely. Then I realized, I ain't gonna get Bandai'd with this thing.. Got my precision screwdriver nearby and loosen up the damn screws. That helped. A LOT. My other gripes on it: I don't quite like how the wings are pretty much free-floating. There doesn't seem to be a locking mechanism or a damn tab to secure it. Also, I keep depressing the inner shins and that was triggering my ocd. The shield's kinda dorky, too. I'm way too meh on the ordnance accessories. The FP are a bit too dark for me. Other than that (and the canards being irritatingly non-anime-accurate when in fighter-mode), it's quite a nice YF-19 valk. I do wish Arcadia make a v3 of their 1/60 YF-19 to fix and clean up the shenanigans they did on their v2. Finally, some pictars! *snip!* I too had a teeny bit of trouble with one of the inner shin parts which wouldn't pop out flush with the rest of the leg but I got it done eventually. Other than the super tight hips the transformation wasn't difficult at all. I rather enjoyed having a play with this one. Then again I don't really remember if I had any real difficulties with the ADV.. Also, I don't really mind the shallower canard angles on this compared to the Arcadia example. Looks good to me. Quote Link to comment Share on other sites More sharing options...
Trifalger Posted September 29, 2018 Share Posted September 29, 2018 That's kind of impressive. I didn't think of sanding and beveling the new heel to match the body lines and basically make it a shorter VF-19 heel. It looks good if it could be buffed out a little more. Quote Link to comment Share on other sites More sharing options...
David Hingtgen Posted September 29, 2018 Share Posted September 29, 2018 38 minutes ago, treatment said: I do wish Arcadia make a v3 of their 1/60 YF-19 to fix and clean up the shenanigans they did on their v2. I think that's about the best bet for me, personally. Fix the overall color (and pink-ness of the white bits), "lock" the wings in fighter mode, and it'd be pretty great. (Fixing the issues with Bandai's would take a major redesign of the wings/wingroots, and convincing them that graffiti--like levels of non-canon markings everywhere is a bad thing---AND they'd have to actually make more than 3 dozen to sell...) Quote Link to comment Share on other sites More sharing options...
Foblander Posted September 29, 2018 Share Posted September 29, 2018 3 hours ago, jenius said: Yeah, that's brutal the first time. I just pryed it up with my nails and took breaks when it hurt or was getting scary until it popped free. Yeah I finally got it to release with the fishing line. Hopefully it becomes easier l next time >< Finally got it transformed to battroid mode. It is so beautiful. Lol Although the paintjob on the chest vents are sloppy.. Quote Link to comment Share on other sites More sharing options...
F360 Posted September 29, 2018 Share Posted September 29, 2018 1 hour ago, Foblander said: Yeah I finally got it to release with the fishing line. Hopefully it becomes easier l next time >< Finally got it transformed to battroid mode. It is so beautiful. Lol Although the paintjob on the chest vents are sloppy.. Saw this on 2chan . Tilt a bit before pulling. Quote Link to comment Share on other sites More sharing options...
Sildani Posted September 29, 2018 Share Posted September 29, 2018 That’s brilliant. Will try. Quote Link to comment Share on other sites More sharing options...
eXis10z Posted September 29, 2018 Share Posted September 29, 2018 Did Amazon JP do an NY? They cancelled some orders but I see in Stock to be fulfilled by Amazon. Quote Link to comment Share on other sites More sharing options...
Foblander Posted September 29, 2018 Share Posted September 29, 2018 11 minutes ago, F360 said: Saw this on 2chan . Tilt a bit before pulling. I tried to do something like that but it was so hard to get a good grip. That or my finger strength sucks. Lol Quote Link to comment Share on other sites More sharing options...
Sanity is Optional Posted September 29, 2018 Share Posted September 29, 2018 (edited) 9 minutes ago, eXis10z said: Did Amazon JP do an NY? They cancelled some orders but I see in Stock to be fulfilled by Amazon. Fulfilled by Amazon just means the seller has it in Amazon's warehouse IIRC, it's different than "sold by Amazon". Edited September 29, 2018 by Sanity is Optional Quote Link to comment Share on other sites More sharing options...
F360 Posted September 29, 2018 Share Posted September 29, 2018 my amazon.jp package arrived today after the long wait of shipping soon. In typical amazon fashion and packaging. box twice the size , 5 sheet of packaging paper, 1 tape straight down the middle to seal the shipping box. Lots of space inside for the Yf-19 box to left right up down. Not shrink wrap or bubbles Shipping box a bit dented , Yf-19 box have very small dent on the corners. So I kinda waited after dinner to open this thing ............. to my surprise, everything is in tact , nothing broken. Woohooo ! Quote Link to comment Share on other sites More sharing options...
eXis10z Posted September 29, 2018 Share Posted September 29, 2018 2 hours ago, Sanity is Optional said: Fulfilled by Amazon just means the seller has it in Amazon's warehouse IIRC, it's different than "sold by Amazon". I see. Thanks for sharing. Quote Link to comment Share on other sites More sharing options...
Mommar Posted September 29, 2018 Share Posted September 29, 2018 5 hours ago, David Hingtgen said: I think that's about the best bet for me, personally. Fix the overall color (and pink-ness of the white bits), "lock" the wings in fighter mode, and it'd be pretty great. (Fixing the issues with Bandai's would take a major redesign of the wings/wingroots, and convincing them that graffiti--like levels of non-canon markings everywhere is a bad thing---AND they'd have to actually make more than 3 dozen to sell...) Arcadia has three specific Engineering fixes to make their V2 ideal. Locking wings, corrected ankles and an additional click at the Gerwalk joint. Quote Link to comment Share on other sites More sharing options...
ArchieNov Posted September 29, 2018 Share Posted September 29, 2018 3 hours ago, eXis10z said: Did Amazon JP do an NY? They cancelled some orders but I see in Stock to be fulfilled by Amazon. NY has never done that. I think you are referring to MyKombini. Quote Link to comment Share on other sites More sharing options...
eggy99 Posted September 29, 2018 Share Posted September 29, 2018 25 minutes ago, Mommar said: Arcadia has three specific Engineering fixes to make their V2 ideal. Locking wings, corrected ankles and an additional click at the Gerwalk joint. Add 1 more: Revised Intakes, that aren't blunt... but I guess that's not really engineering. More aesthetics. Quote Link to comment Share on other sites More sharing options...
Lolicon Posted September 29, 2018 Share Posted September 29, 2018 Transformed first unit. Nothing broken though the rear stabilizers can pop out pretty easily. She just needs a panel wash! Quote Link to comment Share on other sites More sharing options...
seti88 Posted September 29, 2018 Author Share Posted September 29, 2018 (edited) 12 hours ago, Saburo said: @seti88 here's Gerwalk Setup takes a bit longer for the shot and to also setup the hanger. Nice low or shld I say mid-ish angle shot! Edited September 29, 2018 by seti88 Quote Link to comment Share on other sites More sharing options...
Sephiroth Posted September 29, 2018 Share Posted September 29, 2018 Got my Bandai DX YF-19 a few days ago, but haven’t transformed it until today. I have not encountered any complainable QC issues, although I did need to loosen the screws on the hip joints as they were too tight. Mine shipped from HLJ and it arrived quickly and unbroken. It is very sturdy and looks fantastic in battroid mode, especially with all the extra hands. I still prefer my Arcadia YF-19 in fighter mode, though. Quote Link to comment Share on other sites More sharing options...
spacemanoeuvres Posted September 29, 2018 Share Posted September 29, 2018 (edited) Left work 15 mins early to get mine from the post office before they closed and got rear ended lol Tis but a scratch but no DX19 for me to admire Friday evening : / Edited September 29, 2018 by spacemanoeuvres Quote Link to comment Share on other sites More sharing options...
David Hingtgen Posted September 29, 2018 Share Posted September 29, 2018 6 hours ago, eggy99 said: Add 1 more: Revised Intakes, that aren't blunt... but I guess that's not really engineering. More aesthetics. Gah, how'd I forget that? It caught my eye again in the last comparison pic I saw, just a couple posts ago. Yeah, that bugs me even more than the wings at this point. Quote Link to comment Share on other sites More sharing options...
Saviant Posted September 29, 2018 Share Posted September 29, 2018 I thought I would put mine in gerwalk mode and one of the ankles is really loose, any idea how to tighten it up? Quote Link to comment Share on other sites More sharing options...
Dobber Posted September 29, 2018 Share Posted September 29, 2018 Loosened the hip joints and it is so much better now. Main problem is the horrible fit of the left V. Stab. I have no idea how to fix that. Biggest problem for me is getting the legs back into place for fighter mode. It is a super bitch for me. I tried putting the fast packs on but I can’t get the little inserts on the legs to stay on when trying to get the legs back into place. The grey arm pieces are in the way. Chris Quote Link to comment Share on other sites More sharing options...
recon Posted September 29, 2018 Share Posted September 29, 2018 (edited) 12 hours ago, F360 said: Saw this on 2chan . Tilt a bit before pulling. Wow thats a life saver tip. Will help soothe plenty of nerves for those who are unlocking the tabs to wings for the first time Edited September 29, 2018 by recon Quote Link to comment Share on other sites More sharing options...
kanedaestes Posted September 29, 2018 Share Posted September 29, 2018 Quote Link to comment Share on other sites More sharing options...
jenius Posted September 29, 2018 Share Posted September 29, 2018 (edited) 26 minutes ago, Dobber said: Loosened the hip joints and it is so much better now. Main problem is the horrible fit of the left V. Stab. I have no idea how to fix that. Biggest problem for me is getting the legs back into place for fighter mode. It is a super bitch for me. I tried putting the fast packs on but I can’t get the little inserts on the legs to stay on when trying to get the legs back into place. The grey arm pieces are in the way. Chris Make sure you're putting in the right pieces, they are left and right specific and messing that up significantly ups the difficulty... Even so, it's a tough spot, you can get the legs in position then lift the shoulders, put in the parts, and put the shoulders back down. Edited September 29, 2018 by jenius Quote Link to comment Share on other sites More sharing options...
Foblander Posted September 29, 2018 Share Posted September 29, 2018 The Bandai DX YF-19 is my first Macross product by Bandai and I am impressed. I am glad I decided to try one of Bandai's Valks instead of only purchasing Yamato/Arcadia Valks. How would you guys compare the YF-19 to something like the VF-31 toys by Bandai? I feel a Bandai addiction coming on. Lol Now I regret not preordering Bandai's 1/48 VF-1J.. Quote Link to comment Share on other sites More sharing options...
kanedaestes Posted September 29, 2018 Share Posted September 29, 2018 (edited) I just got the 31 and it’s the overall best Bandai Valk. I’d say the 19 is second followed by the previous valks Edited September 29, 2018 by kanedaestes Quote Link to comment Share on other sites More sharing options...
Mommar Posted September 29, 2018 Share Posted September 29, 2018 (edited) 1 hour ago, Foblander said: The Bandai DX YF-19 is my first Macross product by Bandai and I am impressed. I am glad I decided to try one of Bandai's Valks instead of only purchasing Yamato/Arcadia Valks. How would you guys compare the YF-19 to something like the VF-31 toys by Bandai? I feel a Bandai addiction coming on. Lol Now I regret not preordering Bandai's 1/48 VF-1J.. The 31 is far superior to the 19. Edited September 29, 2018 by Mommar Quote Link to comment Share on other sites More sharing options...
Guyffon Posted September 29, 2018 Share Posted September 29, 2018 Hmmmmm, I feel that the YF-30 n YF-19 can both share 2nd place though Quote Link to comment Share on other sites More sharing options...
treatment Posted September 29, 2018 Share Posted September 29, 2018 1 hour ago, Foblander said: The Bandai DX YF-19 is my first Macross product by Bandai and I am impressed. I am glad I decided to try one of Bandai's Valks instead of only purchasing Yamato/Arcadia Valks. How would you guys compare the YF-19 to something like the VF-31 toys by Bandai? I feel a Bandai addiction coming on. Lol Now I regret not preordering Bandai's 1/48 VF-1J.. It rather depends. Build-wise: the VF-31 class is very solid and have less issues out of the box (broken antennae) than the YF-19. Accessories-wise: the YF-19 has the FPs and quite a lot of ordnance already included. The VF-31, the FP and reaction-missiles accessories are a scalper-friendly expensive extra. Aesthetics/Designs: fighter-mode: The VF-31 is very slick, pretty and quite anime-accurate in fighter-mode. The YF-19 in fighter-mode is just at least line-art compliant, but not quite anime-accurate. gerwalk-mode: I'll give this mode to the VF-31 as the YF-19 is always ugly in this mode due to Kawamori's design. battroid-mode: Definitely YF-19. Way both pretty and menacing and no unsightly overhanging kibble. Much more intimidating "macho" presence on the shelf and elsewhere. In contrast, the VF-31 looks exactly like damn damselfly robot. Quite an insectoid. Thin biceps and unsightly overhanging wings back-kibble. Emotional/Nostalgic factor: You'll prolly like appreciate the VF-31 alot more if you'd seen Macross Delta anime. The YF-19 is one of the legendary and iconic valkyrie of the Macross franchise, and most of us had watched and thoroughly enjoyed the anime it came from. Quote Link to comment Share on other sites More sharing options...
PsYcHoDyNaMiX Posted September 29, 2018 Share Posted September 29, 2018 (Macross universe) Engineering wise the vf-30/31 is superior to the 19 and the 30/31 are awesome. Bandai did a great job with producing the DXs for 30/31 and the 19. But I think Bandai went over the top with engineering for the 19 because they did an excellent job with compensating for the anime-magic involved with its chest, legs and arms for fighter mode (the collapseable panels; I think they might've taken influence from Studio Halfeye), where as the 30/31 were mostly pulled straight from existing CG'd models. Design-wise I like the 19 because it really didn't leave much room for kibble (aside from the hip wings in battroid), where as the 30/31 have the backpack kibble, wing flappies, pod dildos. Plus I got a soft spot for the 19's because Macross Plus was what got me back into Macross. Before the internets I thought Macross was over after Macross II... XD Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.