jenius Posted December 29, 2015 Share Posted December 29, 2015 Great, now if they would only say something about improved ankle and high speed joints. Quote Link to comment Share on other sites More sharing options...
Pedro2k6 Posted December 29, 2015 Share Posted December 29, 2015 Great, now if they would only say something about improved ankle and high speed joints. They know about the ankle problem...cause a lot of people complain about it in Twitter. They will try to fix it in this release. No words about HS mode. Quote Link to comment Share on other sites More sharing options...
Kanedas Bike Posted December 29, 2015 Share Posted December 29, 2015 Actually excited about this release, thanks Pedro and others for getting the info off of Arcadia's Twitter feed. I still have (1) remaining YF-19 from Arcadia's initial release (unopened) and sold the others, the one that I did open I never transformed so I never did personally experience the issue. -b. Quote Link to comment Share on other sites More sharing options...
Ignacio Ocamica Posted December 29, 2015 Share Posted December 29, 2015 I know we shouldn't do anything to a $300+ toy, but I used just a bit of clear matte tape on the underside to secure the wings and they don't move at all fully loaded (to be fair only one wing was slightly loose). Simple fix you can't even tell. The ankles are a different story though. Will get this rerelease if there's more tampo. Quote Link to comment Share on other sites More sharing options...
Gundam@EFSF Posted December 29, 2015 Share Posted December 29, 2015 I want bandai to announce her dx vf19 before we need to make order... Quote Link to comment Share on other sites More sharing options...
seti88 Posted December 30, 2015 Share Posted December 30, 2015 I want bandai to announce her dx vf19 before we need to make order... haha with delta coming on, i dont know when they will have the time for a 19 release... Quote Link to comment Share on other sites More sharing options...
Guest davidwhangchoi Posted January 3, 2016 Share Posted January 3, 2016 anyone pre ordering this. i want to know if there was any changes... Quote Link to comment Share on other sites More sharing options...
Sandman Posted January 4, 2016 Share Posted January 4, 2016 i might preorder this is they improved the tampo mainly the intake markings. Quote Link to comment Share on other sites More sharing options...
Pedro2k6 Posted January 4, 2016 Share Posted January 4, 2016 anyone pre ordering this. i want to know if there was any changes... I Will get one. Quote Link to comment Share on other sites More sharing options...
jenius Posted January 4, 2016 Share Posted January 4, 2016 Do we think Bandai will announce the preorder for the first VF-31 on the same day Arcadia starts taking preorders for the 19? Quote Link to comment Share on other sites More sharing options...
derex3592 Posted January 4, 2016 Share Posted January 4, 2016 If Arcadia gave us a new cool paint scheme I might actually bite on a second... Quote Link to comment Share on other sites More sharing options...
Loop Posted January 4, 2016 Share Posted January 4, 2016 I already have 2, I think I will sit out on this one unless something is vastly different. Quote Link to comment Share on other sites More sharing options...
no3Ljm Posted January 4, 2016 Share Posted January 4, 2016 If Arcadia gave us a new cool paint scheme I might actually bite on a second... Version 2's of Birds of Prey or Double Nuts, perhaps? Or VF-19A Lightnings? I'll go with Lightnings if ever. Quote Link to comment Share on other sites More sharing options...
Kanedas Bike Posted January 4, 2016 Share Posted January 4, 2016 Version 2's of Birds of Prey or Double Nuts, perhaps? Or VF-19A Lightnings? I'll go with Lightnings if ever. *snip* *2 for the Lighting custom. -b. Quote Link to comment Share on other sites More sharing options...
Xigfrid Posted January 4, 2016 Share Posted January 4, 2016 This fix was so easy at the end that I felt unsatisfied when my YF-19 was assembled back with the wings tight in all 3 positions! I can't believe Arcadia haven't figured it out already... I had disassembled the whole wing but in final, the fix doesn't require any screw removal, you can fix it directly from any mode, because the only thing you need is a 2mm long x 1mm wide x 1 mm high plastic scraps, such as plastic cards, WSF leftovers, etc... First step: With a pencil, write a small mark on the bottom of the wing, to indicate the area where the hole finishes. -This hole was designed to accept the metal arm for High Speed mode position- 2nd step: Take the small scrap of plastic, and glue it over the pencil mark. The plastic scrap should be aligned with the wing short side. Let the superglue dry and THAT'S IT! Fighter mode: Battroid mode: High speed mode: Quote Link to comment Share on other sites More sharing options...
Raptor One Posted January 4, 2016 Share Posted January 4, 2016 Will DEFINITELY be trying this ASAP Quote Link to comment Share on other sites More sharing options...
Gojira101 Posted January 11, 2016 Share Posted January 11, 2016 What was the MSRP on the original release and anyone have suggestions of where too preorder if they do rerelease it? I'm new and have wanted a 19 for a long time. Quote Link to comment Share on other sites More sharing options...
wmkjr Posted January 11, 2016 Share Posted January 11, 2016 (edited) Click the follow this topic on the upper right of this thread. It'll send updates on this thread to your email. Usually folks will put up the links for the preorder sites. Forgot the price, I think it was 32800 yen maybe? I think it was cheaper. But we don't know if it's a straight reissue with all those extra weapons set or a different one with some revisions. Edited January 11, 2016 by wmkjr Quote Link to comment Share on other sites More sharing options...
F360 Posted January 11, 2016 Share Posted January 11, 2016 What was the MSRP on the original release and anyone have suggestions of where too preorder if they do rerelease it? I'm new and have wanted a 19 for a long time. The msrp was 32800 yen, and you should be able to find the preorder on all the normal webstores. http://www.nippon-yasan.com etc The preorders normally stay up for a while unlike the bandai ones. Quote Link to comment Share on other sites More sharing options...
barurutor Posted January 11, 2016 Share Posted January 11, 2016 This fix was so easy at the end that I felt unsatisfied when my YF-19 was assembled back with the wings tight in all 3 positions! I can't believe Arcadia haven't figured it out already... I had disassembled the whole wing but in final, the fix doesn't require any screw removal, you can fix it directly from any mode, because the only thing you need is a 2mm long x 1mm wide x 1 mm high plastic scraps, such as plastic cards, WSF leftovers, etc... First step: With a pencil, write a small mark on the bottom of the wing, to indicate the area where the hole finishes. -This hole was designed to accept the metal arm for High Speed mode position- 001.jpg 2nd step: Take the small scrap of plastic, and glue it over the pencil mark. The plastic scrap should be aligned with the wing short side. 002.jpg 003.jpg Let the superglue dry and THAT'S IT! Fighter mode: 004.jpg Battroid mode: 005.jpg High speed mode: 006.jpg This is a brilliant fix. anybody willing to put up the plastic nubs on shapeways ? Quote Link to comment Share on other sites More sharing options...
Chronocidal Posted January 11, 2016 Share Posted January 11, 2016 Too bad that doesn't do anything to tighten up the hinges themselves. The whole mechanism really needs a redesign, they just made it far too minimalistic to support the weight of the wings, especially if they're loaded full of weapons. Quote Link to comment Share on other sites More sharing options...
Gojira101 Posted January 11, 2016 Share Posted January 11, 2016 Can not wait for the preorders to begin this month (as indicated by their Twitter feed) now I just hope they make a YF-21 to stand opposite of it. Quote Link to comment Share on other sites More sharing options...
Xigfrid Posted January 11, 2016 Share Posted January 11, 2016 This is a brilliant fix. anybody willing to put up the plastic nubs on shapeways ? You can make the bits from an old credit card, or any plastic sheets that would be 1mm thick. Shapeways wouldn't allow to print such a small piece of 2mm x 1mm x 1mm Quote Link to comment Share on other sites More sharing options...
no3Ljm Posted January 11, 2016 Share Posted January 11, 2016 This is a brilliant fix. anybody willing to put up the plastic nubs on shapeways ? You can make the bits from an old credit card, or any plastic sheets that would be 1mm thick. Shapeways wouldn't allow to print such a small piece of 2mm x 1mm x 1mm Yeah, with the size Xigfrid has posted, you can get a Styrene Sheet from any Hobby Store for it. Quote Link to comment Share on other sites More sharing options...
VF-Zer0S Posted January 11, 2016 Share Posted January 11, 2016 https://www.hlj.com/product/ACA82042/Sci Back up for Pre-Order April Restock Quote Link to comment Share on other sites More sharing options...
wmkjr Posted January 11, 2016 Share Posted January 11, 2016 First 30 to order from Arcadia gets the display stand included. Quote Link to comment Share on other sites More sharing options...
Pedro2k6 Posted January 11, 2016 Share Posted January 11, 2016 Got one. Quote Link to comment Share on other sites More sharing options...
spanner Posted January 12, 2016 Share Posted January 12, 2016 tempted to get a 2nd one but not sure I really need it.. nor the expense.. Quote Link to comment Share on other sites More sharing options...
no3Ljm Posted January 12, 2016 Share Posted January 12, 2016 Got one. Nice! You got it from Arcadia or HLJ? tempted to get a 2nd one but not sure I really need it.. nor the expense.. Just follow what you heart tells you. Quote Link to comment Share on other sites More sharing options...
spanner Posted January 12, 2016 Share Posted January 12, 2016 Just follow what you heart tells you. hehe!! If I did that then I would be buying everything and be broke and living on the street! Quote Link to comment Share on other sites More sharing options...
no3Ljm Posted January 12, 2016 Share Posted January 12, 2016 hehe!! If I did that then I would be buying everything and be broke and living on the street! Hahaha! That's true. That's why I cancelled my VF-4G so that I will have budget on the VF-2SS Faerie SAP. Good thing I already have two. But I still want to have a new Arcadia VF-4G box. Quote Link to comment Share on other sites More sharing options...
Pedro2k6 Posted January 12, 2016 Share Posted January 12, 2016 Nice! You got it from Arcadia or HLJ? HLJ. Already have one....but I always want 2. Quote Link to comment Share on other sites More sharing options...
hal9000 Posted January 12, 2016 Share Posted January 12, 2016 Wow didn't expect this tonight. I'm in for one I agree with Pedro 2 is better than one:) Quote Link to comment Share on other sites More sharing options...
spanner Posted January 12, 2016 Share Posted January 12, 2016 Hahaha! That's true. That's why I cancelled my VF-4G so that I will have budget on the VF-2SS Faerie SAP. Good thing I already have two. But I still want to have a new Arcadia VF-4G box. Just hope for your and everyone else sake whos buying the thing that the VF-2 actually turns out to be a decent thing.. Quote Link to comment Share on other sites More sharing options...
no3Ljm Posted January 12, 2016 Share Posted January 12, 2016 (edited) Just hope for your and everyone else sake whos buying the thing that the VF-2 actually turns out to be a decent thing.. Hahaha! Reading this kinda feels like the Evolution Toys' VF-2SS is kinda cursed. Hehehe. Edited January 12, 2016 by no3ljm Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.