Saburo Posted July 5, 2014 Share Posted July 5, 2014 Nice. Can you show me a screen capture of the 599XX that you were working on? You got me curious. Hehehe. I wish I could... My xbox 360 and it's HDD died about a year ago. . All I have left are some screen caps of the Aventador. Quote Link to comment Share on other sites More sharing options...
sreichma Posted July 7, 2014 Share Posted July 7, 2014 I 100% pirated your Gerwalk pose on the 27 and it pulls attention directly to it now. If I ever post a picture of my collection and people tell me how cool the gerwalk pose is I will likely also take full credit for it. Be sure to remember this post in order to set the record straight in the future. At that time, I will deny all knowledge of typing this. Quote Link to comment Share on other sites More sharing options...
Kanedas Bike Posted July 8, 2014 Share Posted July 8, 2014 I 100% pirated your Gerwalk pose on the 27 and it pulls attention directly to it now. If I ever post a picture of my collection and people tell me how cool the gerwalk pose is I will likely also take full credit for it. Be sure to remember this post in order to set the record straight in the future. At that time, I will deny all knowledge of typing this. -b. Quote Link to comment Share on other sites More sharing options...
Saburo Posted July 8, 2014 Share Posted July 8, 2014 I 100% pirated your Gerwalk pose on the 27 and it pulls attention directly to it now. If I ever post a picture of my collection and people tell me how cool the gerwalk pose is I will likely also take full credit for it. Be sure to remember this post in order to set the record straight in the future. At that time, I will deny all knowledge of typing this. Noted. Quote Link to comment Share on other sites More sharing options...
brouken Posted January 21, 2015 Share Posted January 21, 2015 Anybody interested in getting the DX Super VF-27? I got an email notification that it is back in stock at NY: http://www.nippon-yasan.com/product.php?id_product=5088Its also in stock over at Plamoya: http://plamoya.com/en/dx-chogokin-macross-frontier-vf27-lucifer-super-parts-set-p-81173.html Given the weak JPY, I think these prices are quite reasonable considering this already comes bundled with the Super Pack. For me, this is one of the best enemy valkyries you can buy right now. Quote Link to comment Share on other sites More sharing options...
vsim Posted January 21, 2015 Share Posted January 21, 2015 Anybody interested in getting the DX Super VF-27? I got an email notification that it is back in stock at NY: http://www.nippon-yasan.com/product.php?id_product=5088 Its also in stock over at Plamoya: http://plamoya.com/en/dx-chogokin-macross-frontier-vf27-lucifer-super-parts-set-p-81173.html Given the weak JPY, I think these prices are quite reasonable considering this already comes bundled with the Super Pack. For me, this is one of the best enemy valkyries you can buy right now. Those appear to be for just the super parts, not the VF-27 itself. ? Quote Link to comment Share on other sites More sharing options...
Mommar Posted January 21, 2015 Share Posted January 21, 2015 Those appear to be for just the super parts, not the VF-27 itself. ? The super parts have never been sold separate. Quote Link to comment Share on other sites More sharing options...
Kanedas Bike Posted January 21, 2015 Share Posted January 21, 2015 Yeah, that's just a re-issue of the most recent DX Chogokin VF-27 with included Super Parts. And priced a bit high (I honestly don't recall what the original retail price was) compared to what you find on Mandarake. -b. Quote Link to comment Share on other sites More sharing options...
McFly!! Posted January 21, 2015 Share Posted January 21, 2015 Yeah, that's just a re-issue of the most recent DX Chogokin VF-27 with included Super Parts. And priced a bit high (I honestly don't recall what the original retail price was) compared to what you find on Mandarake. -b. i got 3 from hlj at around JPY 17,000 iirc Quote Link to comment Share on other sites More sharing options...
Valk-1S Posted January 21, 2015 Share Posted January 21, 2015 (edited) Yup priced a bit high as it's still going about 20k Yen at Amazon JP before shipping. Edited January 21, 2015 by Valk-1S Quote Link to comment Share on other sites More sharing options...
Lumidingo Posted November 16, 2015 Share Posted November 16, 2015 Help! I'm sorry for this being a bit of a necropost, but I've just bought one of these NIB, and it's arrived with the very tip of the nosecone (which appears to be a separate piece on all the Bandai valks) unattached from the rest of the nose. I'm probably asking the wrong thread for this, but can anyone please let me know what particular variety of glue I'd need to use for this? I'm not sure what would be the strongest, it'd be plastic-on-plastic, but I'm worried I might use something that'll discolor the toy. Any suggestions? Quote Link to comment Share on other sites More sharing options...
wmkjr Posted November 16, 2015 Share Posted November 16, 2015 If you can post pictures it might help narrow down what solutions, if any, are available. Quote Link to comment Share on other sites More sharing options...
twich Posted November 19, 2015 Share Posted November 19, 2015 My attachment for the nose cone came with crumbling plastic too, so I wonder if QC issue? Do the green ones have this issue? Thanks Twich Quote Link to comment Share on other sites More sharing options...
Garfinkel Posted November 19, 2015 Share Posted November 19, 2015 If you are talking about the very tip of the nosecone mine broke a millimetre or two up. I used some plastic weld (liquid polycement) to glue it back together. I had assumed it was just that mine had taken a fall and it was my own fault. Quote Link to comment Share on other sites More sharing options...
Sildani Posted November 19, 2015 Share Posted November 19, 2015 On the brand new 27s, the nose is already flattened about 1mm. Or mine is. Came that way out of the box. Quote Link to comment Share on other sites More sharing options...
twich Posted November 22, 2015 Share Posted November 22, 2015 I am referring to the actual plastic connector that attaches the nose one to the rest of the plane, when I attempted to transform for the first time a week after getting it, the nose one just came off in my hand with a good sized chunk of plastic that surrounded the little pin connecting it to the rest of the mecha. Makes it real disappointing, as I am afraid to transform to battroid now, even though I attempted repair with gorilla glue. So my super VF-27y stays in fighter mode...... Twich Quote Link to comment Share on other sites More sharing options...
ArchieNov Posted November 22, 2015 Share Posted November 22, 2015 I am referring to the actual plastic connector that attaches the nose one to the rest of the plane, when I attempted to transform for the first time a week after getting it, the nose one just came off in my hand with a good sized chunk of plastic that surrounded the little pin connecting it to the rest of the mecha. Makes it real disappointing, as I am afraid to transform to battroid now, even though I attempted repair with gorilla glue. So my super VF-27y stays in fighter mode...... Twich I've never heard of anyone else having this kind of issue, on any of the VF-27 molds (old and new) as well as the Renewals. I know it sucks, but I think you got a bad copy. Question though, when you pulled the nose down, did you try pulling it forward first to give enough space to move it down? Quote Link to comment Share on other sites More sharing options...
twich Posted November 22, 2015 Share Posted November 22, 2015 Yeah, just like on my DX YF-25 and DX YF-29, which I had no problem with. I think, as you say, I got a bad copy. Twich Quote Link to comment Share on other sites More sharing options...
jenius Posted November 22, 2015 Share Posted November 22, 2015 Is it just a part without glue or a broken part? Quote Link to comment Share on other sites More sharing options...
twich Posted November 24, 2015 Share Posted November 24, 2015 Part is broken into many little plastic shards, centered around the connection points were the rod connects the nose one to the little part that connects it to the rest of the plane Quote Link to comment Share on other sites More sharing options...
Mommar Posted November 28, 2015 Share Posted November 28, 2015 (edited) I'm late with some of these pics. . Edited November 28, 2015 by Mommar Quote Link to comment Share on other sites More sharing options...
Sildani Posted November 29, 2015 Share Posted November 29, 2015 It looks great with super parts! And it occurs to me, I'm kinda surprised Bandai hasn't done a Web Shop Special with them yet... Quote Link to comment Share on other sites More sharing options...
derex3592 Posted November 29, 2015 Share Posted November 29, 2015 (edited) I would be in for a set for Grace, in some different off green or grey color maybe, great poses Mommar! Edited November 29, 2015 by derex3592 Quote Link to comment Share on other sites More sharing options...
Chronocidal Posted July 13, 2016 Share Posted July 13, 2016 So the search function refuses to find this topic for some odd reason, but fortunately it wasn't buried too far. Apologies for digging up this old relic, but has anyone every taken apart the backpack drone for this set? My drone has nozzles that are limp as a soggy roll of tissue paper, and I need to find some way to get them off without destroying the drone. Pried off the glued on screw covers on the underside, only to find that that the only thing the screws do anything for is holding the center piece together, while the entire engine pods are glued shut. I'm tempted to try and just pop them off the ball joints, but I can't get any leverage on the nozzle, and I'm worried I'll snap off the goofy jagged petals if I try. Quote Link to comment Share on other sites More sharing options...
David Hingtgen Posted July 19, 2016 Share Posted July 19, 2016 I don't own that version of the mold, but I've *tried* to disassemble enough Frontier valks to confirm that yes, sadly, they are often held together more with glue than with screws. And it's a very good glue, that can rip the plastic apart before it'll let the seam go. Quote Link to comment Share on other sites More sharing options...
valhary Posted May 2, 2019 Share Posted May 2, 2019 WARNING!!! Once again I was transforming my VF-27 and notice crack marks on the back toes even a pair already broken I replaced mine with the V1 version parts that are OK despite be older (maybe is the plastic) So I recomend check yours Quote Link to comment Share on other sites More sharing options...
borgified Posted May 2, 2019 Share Posted May 2, 2019 Hmm.. My copy is still in the box since I got it from Amiami. Will give it a look over when I have time. I wonder if Grace/CF version has the same issue as well? Quote Link to comment Share on other sites More sharing options...
nightmareB4macross Posted May 2, 2019 Share Posted May 2, 2019 2 hours ago, valhary said: WARNING!!! Once again I was transforming my VF-27 and notice crack marks on the back toes even a pair already broken I replaced mine with the V1 version parts that are OK despite be older (maybe is the plastic) So I recomend check yours Either the metal is expanding or the plastic is shrinking. Seems this will be the inevitable fate of lots of VF/YFs out there. Such a bummer. =( Quote Link to comment Share on other sites More sharing options...
Bishop Posted May 2, 2019 Share Posted May 2, 2019 Mine is on the way Quote Link to comment Share on other sites More sharing options...
Sanity is Optional Posted May 2, 2019 Share Posted May 2, 2019 Honestly, it's a bit odd since they're using split pins. Even if they expand, they don't necessarily have to change diameter since they're hollow and have a break in the circumference. Quote Link to comment Share on other sites More sharing options...
F360 Posted May 2, 2019 Share Posted May 2, 2019 Could be just the weight of the Valk itself if it’s in a standing post and all the weight is on the feet. Quote Link to comment Share on other sites More sharing options...
valhary Posted May 2, 2019 Share Posted May 2, 2019 I doubt that has something to do with the weight because the most of the time display in fighter mode also consider the V1 not have this problem and are the same pins (I know because disarmament to transplant it) The only difference seems to be the plastic Quote Link to comment Share on other sites More sharing options...
jenius Posted May 2, 2019 Share Posted May 2, 2019 It could be a manufacturing issue, like less careful installation of the pin. Many of Yamato's woes actually started at the assembly line. If the plastic was being stressed during the installation of the pin, that could cause a fissure that would become a crack years later. Quote Link to comment Share on other sites More sharing options...
mickyg Posted May 3, 2019 Share Posted May 3, 2019 That is unfortunate. I'll have to check both my Brera and Grace versions soon to see if this an issue on either. As I recall, the plastic is exactly the same between whether it's green or magenta. Quote Link to comment Share on other sites More sharing options...
ArchieNov Posted May 3, 2019 Share Posted May 3, 2019 The feet are of a different color on the v2 VS the first version though. But not sure if the plastic would be different as well. I'm thinking it should be the same. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.