logos Posted May 14, 2009 Share Posted May 14, 2009 Decaled my VF-11B. Here are a couple of shots. If you want more check out the Strike a pose thread. Quote Link to comment Share on other sites More sharing options...
Kicker773 Posted May 14, 2009 Share Posted May 14, 2009 wow .. this is a first case that i know .. will be careful in playing footsie with its feet Quote Link to comment Share on other sites More sharing options...
Kicker773 Posted May 14, 2009 Share Posted May 14, 2009 damn logos could those pic be any bigger.. my eyes went 0,0 for a second there.. lol nonetheless good poses Quote Link to comment Share on other sites More sharing options...
jenius Posted May 14, 2009 Share Posted May 14, 2009 That's too bad about the foot, mine popped in two but nothing was broke, it looks like they were supposed to put a dot of glue on one of the pegs but forgot to. Quote Link to comment Share on other sites More sharing options...
Letigre Posted May 14, 2009 Share Posted May 14, 2009 MIne is fine thus far...the thing is 12 kinds of awesome just sitting in front of me, especially with it's super packs on. Quote Link to comment Share on other sites More sharing options...
Shin Densetsu Kai 7.0 Posted May 14, 2009 Share Posted May 14, 2009 Are the kites tampo printed on? Quote Link to comment Share on other sites More sharing options...
jenius Posted May 14, 2009 Share Posted May 14, 2009 Yep. PS - my full review will be going up sometime in the next few days. Lots of comparison pics... I think you guys'll like it. Quote Link to comment Share on other sites More sharing options...
Kicker773 Posted May 14, 2009 Share Posted May 14, 2009 with you jenius its always something good... can't wait for you to post your mospeada collection on the other thread!!! Quote Link to comment Share on other sites More sharing options...
glane21 Posted May 14, 2009 Share Posted May 14, 2009 I think they should do a skull 1 in every generation fighter. Absolutely agree and I can't believe it hasn't occurred to Yamato. It seems to be one of the most common and wished for custom schemes. I believe they would sell like gangbusters for them. Quote Link to comment Share on other sites More sharing options...
valhary Posted May 15, 2009 Share Posted May 15, 2009 someone knows if the old isamu can put in the vf 11b Quote Link to comment Share on other sites More sharing options...
UN Spacy Posted May 15, 2009 Share Posted May 15, 2009 (edited) Old Isamu doesn't fit in the VF-11B. EDIT: New Isamu fits in the YF-19 quite nicely. Edited May 15, 2009 by UN Spacy Quote Link to comment Share on other sites More sharing options...
valhary Posted May 15, 2009 Share Posted May 15, 2009 ok thanks Quote Link to comment Share on other sites More sharing options...
M'Kyuun Posted May 15, 2009 Share Posted May 15, 2009 Got mine today. Looks fantastic. No issues thus far. Everything's nice and tight, including the fingers, which are usually very floppy on my valks. The gear are a pain, as stated, but add so much to the realism, and the doors flush right up with the legs and fuselage. It's a thing of beauty, and all the little sliding panels and such are great touches. The heat shield snapped tight, first try. The transformation is simple, almost intuitive, if you're used to handling transforming toys. One of the hinged shoulder panels came off of mine while I was rotating the shoulder into position, but it snapped back on with no further worries. So far, this feels like a solid toy; there's very little flimsiness or delicate parts, really, beyond the head laser. My only gripes are the limited elbow articulation( c'mon Yamato, double jointing should be standard on a high end toy), and, although it's not in the current design, a little more articulation could have been possible if the shoulders were mounted on ball joints. Overall, a great looking toy with some neat engineering to overcome "anime magic". To anyone on the fence, I'd recommend it highly. Quote Link to comment Share on other sites More sharing options...
mr.chogokin Posted May 16, 2009 Share Posted May 16, 2009 Old Isamu doesn't fit in the VF-11B. EDIT: New Isamu fits in the YF-19 quite nicely. Old Isamu's enjoying his fatter paycheck too much as YF-19's pilot that's why he can't go back to the 11B. Quote Link to comment Share on other sites More sharing options...
jenius Posted May 16, 2009 Share Posted May 16, 2009 I really should have been cleaning the place before I head off island hopping but instead I was working on a hearty review of the 11B Check it out by going here! Quote Link to comment Share on other sites More sharing options...
505thAirborne Posted May 16, 2009 Share Posted May 16, 2009 Excellent review jenius!! Good clean pictures and good pros/cons on this little darling. Hopefully there is no breakage down the road for this one!! Quote Link to comment Share on other sites More sharing options...
BlueMax Posted May 16, 2009 Share Posted May 16, 2009 Yep, excellent reviews as always. I totally agree with teh lack of stand portion. Quote Link to comment Share on other sites More sharing options...
MacrossJunkie Posted May 16, 2009 Share Posted May 16, 2009 I really should have been cleaning the place before I head off island hopping but instead I was working on a hearty review of the 11B Check it out by going here! I just noticed something that could be corrected whenever you get back. In your pic named "Yamato 160 VF-11B 13.jpg" The top middle pic you have labeled as 1/72 Isamu in VF-11B is actually still the 1/60 VF-11B Isamu. Quote Link to comment Share on other sites More sharing options...
Froy Posted May 17, 2009 Share Posted May 17, 2009 What is the rainbow efect on the canopy? Quote Link to comment Share on other sites More sharing options...
MacrossJunkie Posted May 17, 2009 Share Posted May 17, 2009 What is the rainbow efect on the canopy? It's an iridescent coating they've been putting on the canopies since the v2 1/60 VF-1. Quote Link to comment Share on other sites More sharing options...
edwin3060 Posted May 17, 2009 Share Posted May 17, 2009 Great review! Quote Link to comment Share on other sites More sharing options...
lechuck Posted May 17, 2009 Share Posted May 17, 2009 Great review Jenius. And thanks for following through with the requested picture comparisons. Couple of more questions pertaining to how good the hip/intake area in Battroid mode is: - Are those back plate thingies an irritating obstacle like canards on the YF-19 and the metal tabs on the VF-0? - Good range of movement? - Does the groin joint sort of have lock so it doesn't constantly collapse back in like on the YF-19? - And is it in anyway loose? Quote Link to comment Share on other sites More sharing options...
MacrossJunkie Posted May 17, 2009 Share Posted May 17, 2009 The LERX does get in the way of the intake/hip part of the leg. You have to kind of maneuver the hip either in front of it or behind it. It's a minor annoyance. Overall, it has pretty good articulation aside from the often mentioned lack of a double jointed elbow for more-than-90-degree bends. The forearm does have a slight ability to tilt about 20 or so degrees left or right, which is the first time I've seen that in a valk toy. It seems to help the shield face forward more since it's attached to the underside of the arm. Leg articulation is about the same as the VF-1 at around the same points. You can pull the legs a bit further out, similar to the 19, to get a wider range of movement, but it's not as limited as the 19's to begin with. Not sure what you mean by the groin joint collapsing back in like the 19. What part of the 19 collapses back in for you? As far as the 11 goes, the plate that covers the "face" in fighter mode folds down and locks in behind a tab at the point where cockpit folds away from the neck in battroid. This prevents any accidental folding or swiveling of any sort. I'm not sure if that answers your question. The 11 has the overall tightest joints of any Yamato toy I've had so far and even better than my VF-25G which has some issues with the legs sometimes not being able to hold a pose when off the ground or be able to keep its arms up in certain positions. Quote Link to comment Share on other sites More sharing options...
Letigre Posted May 19, 2009 Share Posted May 19, 2009 I for one hope they revisit the SV-51 with some of the clever locking mechanisms they used on the VF-11. Quote Link to comment Share on other sites More sharing options...
MacrossJunkie Posted May 19, 2009 Share Posted May 19, 2009 I for one hope they revisit the SV-51 with some of the clever locking mechanisms they used on the VF-11. The only lock I can think of that the SV-51 really needs is a wing lock so the wings don't lose their horizontal position if you turn it upside down. The YF-19 could use a lock for the battroid and GERWALK modes too as it relies entirely on gravity, not even any friction, and an upright position to hold it together which I think is really lame. Quote Link to comment Share on other sites More sharing options...
GunnerX Posted May 19, 2009 Share Posted May 19, 2009 The VF-11B is great, but i guess i was one of the unlucky few to actually have TWO left thigh armors for the fast pack! d'oh! Luckily the store which i got it from let me swap out for the correct part. Can't believed i missed that when i chose the box. And to think i almost did not open it to inspect.... Quote Link to comment Share on other sites More sharing options...
OmegaD3k Posted May 19, 2009 Share Posted May 19, 2009 (edited) Love the 11! No probs at all. Heat shield locks perfectly and no loose ejection pods. Another solid, perfect Yamato release! Edited May 19, 2009 by OmegaD3k Quote Link to comment Share on other sites More sharing options...
Letigre Posted May 19, 2009 Share Posted May 19, 2009 The only lock I can think of that the SV-51 really needs is a wing lock so the wings don't lose their horizontal position if you turn it upside down. Absolutely..the pins on mine won't even stay in place when you move it around. I also wouldn't mind a peg that helps keep the wings from flopping down in gerwalk as well. (And a better way to latch for the keeping the battroid's folded torso together..but let's not get carried away.) Quote Link to comment Share on other sites More sharing options...
Scream Man Posted May 20, 2009 Share Posted May 20, 2009 i agree with the 51 wings, but its a hard design to really get right. Those wings are a nightmare, and i feel sory for the engineers as it is. The 51 overall is the least solid of the Valk designs. Quote Link to comment Share on other sites More sharing options...
Scream Man Posted May 21, 2009 Share Posted May 21, 2009 u know what makes me appreciate the 11B even more? trying to put the F#$@ing 21 back into fighter mode. Goddam legs... Quote Link to comment Share on other sites More sharing options...
eriku Posted May 21, 2009 Share Posted May 21, 2009 Yeah, the 11 really does have a fun, smooth and satisfying transformation. I'd actually rank it right below the old 1/55 Chunky for most fun transforming valk toy. Quote Link to comment Share on other sites More sharing options...
logos Posted May 21, 2009 Share Posted May 21, 2009 As long as you remember to put the gimicks away it's great. Quote Link to comment Share on other sites More sharing options...
CF18 Posted May 21, 2009 Share Posted May 21, 2009 trying to put the F#$@ing 21 back into fighter mode. Goddam legs... I just got my YF-21 from HLJ, and it come with an extra paper showing the correct location and the hinge to get the leg in the right angle. May be the first batch didn't have it? Quote Link to comment Share on other sites More sharing options...
MacrossJunkie Posted May 21, 2009 Share Posted May 21, 2009 I just got my YF-21 from HLJ, and it come with an extra paper showing the correct location and the hinge to get the leg in the right angle. May be the first batch didn't have it? First batch had it too. Quote Link to comment Share on other sites More sharing options...
Dobber Posted May 21, 2009 Share Posted May 21, 2009 Yup, I'm ashammed to say that the YF-21 is the only valk that I STILL can not transform...even with the directions. I don't even bother trying now because everythng needs to be JUST RIGHT for it to transform correctly, and I don't want to go through the agravation again. The 11 on the other hand is really fun...except for the lower heat sheild which I can not get without removing the escape pod first. Chris Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.