Mospeada

[Graham]

On 9/7/2025 at 5:38 AM, Perxion said:

Hi Guys! Finally a finish this project. All printed in resine.

Painted with airbrush and handbrush. Some decals from aliexpress 😁

Enjoy! Follow me on youtube and instagram! 

 

Thanks!

That is absolotely amazing!

[Graham]

On 9/6/2025 at 4:12 AM, Tking22 said:

Yeah this is looking like the Mospeada figures for me, scale and price are just right, definitely in for a Tread too whenever that happens. I don't know, I want to wait for the green one, but I may grab the blue one for now just to check it out, then go all in when green releases.

I agree. The price point and size is just right for me and will make it easier to afford multiples, while also being easier on shelf space.

I personally really like the look of Legioss Omega toy in all 3 modes.

I don't mind that these are a bit more toy like. I think they are gonna be fun little toys to play with, transform and pose and the 3mm hardpoints all over the toys should create some interesting options for attaching weapons.

And I'm super looking foward to  Takara Toyrise releasing other versions as will as TLEADs.

[Morgen Black]

On 9/6/2025 at 2:44 PM, Perxion said:

I can make it upon request; it's homemade, actually. I haven't determined the cost yet, but if I get a few orders, I might.

Please add me to the list, I will definitely like to purchase these for my tread.

MB

[Sildani]

Put me on the list please.

[DarkArchon3000]

I am interested in a set. Please add me to the list.  Thank you.

[kevco]

Please add me to the list as well.

 

[mantisfists]

Please add me to that list as well.

[Mommar]

On 9/6/2025 at 3:38 PM, Perxion said:

Hi Guys! Finally a finish this project. All printed in resine.

Painted with airbrush and handbrush. Some decals from aliexpress 😁

Enjoy! Follow me on youtube and instagram! 

 

Thanks!

Woah, this looks incredible!  I'm down.

[Bolt]

@Perxion the demand has quickly escalated. 

[davidwhangchoi]

i just want the Tread pre-order missiles hope sentinel makes more.

[Perxion]

Hello everyone!
Sorry for the delay, but here's the flyer for those interested in the kit.

I have this list of the members interested so far:
-xwing
-Froy
-mech9T8
-General Rasp
-wwwmwww
-Robin-11
-sh9000
-claude grant
-Morgen Black
-Sildani
-DarkArchon3000
-kevco
-mantisfists
-Mommar

Please write to that email with your nickname, your real name and location to cover the shipping costs.
Si hablas español, escribeme en español para una mejor comunicacion.

Please note that this is a homemade kit, so it takes a while, but it is made with a lot of passion and I will put all my effort into delivering the best possible.

A payment link will be sent via email (paypal)

Thank you!

PD: tekering: You wanted to know how I made the plastic blister pack. I'm sorry to disappoint you, but that's a 3D rendering. It's a project I've been wanting to do, but it's still in it's infancy.

[graphic revolt]

Please put me down for 3! LMK when the deadline for payment.

[Bolt]

49 minutes ago, Perxion said:

Hello everyone!
Sorry for the delay, but here's the flyer for those interested in the kit.

I have this list of the members interested so far:
-xwing
-Froy
-mech9T8
-General Rasp
-wwwmwww
-Robin-11
-sh9000
-claude grant
-Morgen Black
-Sildani
-DarkArchon3000
-kevco
-mantisfists
-Mommar

Please write to that email with your nickname, your real name and location to cover the shipping costs.
Si hablas español, escribeme en español para una mejor comunicacion.

Please note that this is a homemade kit, so it takes a while, but it is made with a lot of passion and I will put all my effort into delivering the best possible.

A payment link will be sent via email (paypal)

Thank you!

PD: tekering: You wanted to know how I made the plastic blister pack. I'm sorry to disappoint you, but that's a 3D rendering. It's a project I've been wanting to do, but it's still in it's infancy.

Add me on mate. 
so what is the cost?

[tekering]

10 minutes ago, Bolt said:

Add me on mate. 
so what is the cost?

$60 USD per set, plus shipping. 

[Bolt]

Thanks Ted 

[Perxion]

8 minutes ago, Bolt said:

Thanks Ted 

Please Bolt Send me an email with your request ( same for everyone want a Kit)

Thank you!

[Morgen Black]

@Perxion

Email has been sent!  Thank you for putting this together, the kit looks amazing.

MB  

Edited September 9 by Morgen Black

[Shawn]

Can you explain what else would be needed? Are these connectors sold somewhere else?

Thanks!

[Chronocidal]

Oof, no, those are the pylons that come with the Legioss.  Maybe making more of those for the kit would be an option?

The hard part is probably finding a material that'll have the right properties to attach correctly without breaking.

Edited September 9 by Chronocidal

[26662]

1 hour ago, Chronocidal said:

Oof, no, those are the pylons that come with the Legioss.  Maybe making more of those for the kit would be an option?

The hard part is probably finding a material that'll have the right properties to attach correctly without breaking.

I’m pretty certain I can fabricate those connectors.  I’ll PM Perxion and see if we can work out something.

[Mog]

Worse comes to worse, there’s always adhesive putty. 

[Mommar]

Aren't those the same connectors used to attach the guns to the wings of the Legioss?

[Mog]

Pretty much.

I think each Legioss came with two connectors only.

Looking back at @vladykins’ post a number of pages back, the connector for the Tread missile set is slightly different.  Same connection pegs that connect to the wing, but different connecting ports/holes for the missiles.

Edited September 10 by Mog

[Graham]

I just picked up the recent Sentinel Legioss Eta reissue and damn it was hard to transform, due to multiple super tight joints in the legs and hips.

I transformed it from Fighter to Diver to Soldier mode in one session and it's now going to stay in Soldier mode forever, I'm not going to dare to transform it again for fear of breaking something.

I admit to having very little experience with the Sentinel Legioss toys, I picked up a green one 2 to 3 years ago and promptly snapped one of the hip joints on the first transformation  attempt. I was trying to follow the somewhat incomprehensible (at least to me) instruction manual pics. I neglected to watch any transformation videos at that time.........my bad. 😅

This time I actually watched the Scorched Earth Toys Transformation video, which helped a lot, although unlike in the video, the thighs on mine were super tight to extend. I thought I was gonna break the toy while  trying to extend them. Also, even after watching and pausing the video multiple times, I could not figure out the correct hip bar position for Diver mode. I managed to get it into Diver mode eventually, but still think I didn't get the hip joints correct. I'm super wary about the hips on these toys, due to my above-mentioned previous bad experience with the green Legioss. I was however able to follow the video to get the hip bars in the correct position for soldier mode.😅

My only other complaint about the toy is that the ankles on mine are super loose (the only loose joints on the toy). It kept wanting to tip forward in Diver mode due to the loose ankles.

I've recently been getting back into Mospeada and decided to get the Sentinel Legioss Eta to scratch my legioss itch as I didn't have any Legioss toys and although I've pre-ordered the Pose+ and the Takara Toyrise versions, they won't be released until 2026.

[Graham]

2 hours ago, Mog said:

Pretty much.

I think each Legioss came with two connectors only.

Looking back at @vladykins’ post a number of pages back, the connector for the Tread missile set is slightly different.  Same connection pegs that connect to the wing, but different connecting ports/holes for the missiles.

Yeah, the recent Legioss Eta reissue that I just picked up unly comes with 2 wing pylons.

[Perxion]

Hi everyone!

Sorry for the confusion. Here is the answer.

I designed the missile holders for the connectors supplied by Sentinel-toy for the Legioss figures. Each Legioss comes with two of these connectors.

Only if you have 3 legions you can get all 6 connectors.

I did this to make the most of the connection to the wings in an original way.
Because the printing resin tends to be brittle, I've found that a sliding fit is better to avoid tension.

Beyond this, I have now found a resin that appears to be much more durable and a little more flexible: see below...

This is a screenshot of how it is installed. easy..

Those who don't have those six connectors, just mention it when you email me. And I'll provide another solution.

I hope I've covered all your questions.
Please let me know if anyone has any other questions.

Thank you for your support!

 

[AbdnAllHope]

On 9/7/2025 at 10:36 PM, recon said:

https://www.facebook.com/share/v/1CgZgDA3gJ/

kinda hate the exposed cavity at the shoulder armour. Is this also present for sentinel version?

The legs in this video are miss transformed. Compared to the official images it looks like they did not extend them. 

[vladykins]

8 hours ago, Mog said:

Pretty much.

I think each Legioss came with two connectors only.

Looking back at @vladykins’ post a number of pages back, the connector for the Tread missile set is slightly different.  Same connection pegs that connect to the wing, but different connecting ports/holes for the missiles.

 

Yes, the connection port is the same but the rest is very different. Here's a quick pict (on a rainy day, so sorry for the phone shadow).

[26662]

43 minutes ago, vladykins said:

 

Yes, the connection port is the same but the rest is very different. Here's a quick pict (on a rainy day, so sorry for the phone shadow).

TY.  From @Perxion’s photo alone I couldn’t figure out how everything mated.

[Graham]

I think they have added some more pics of the toy to the official site.

https://www.takaratomy.co.jp/products/tsparkofficial/toyrise/legioss/

 

[Tubes78]

22 hours ago, Graham said:

I just picked up the recent Sentinel Legioss Eta reissue and damn it was hard to transform, due to multiple super tight joints in the legs and hips.

I transformed it from Fighter to Diver to Soldier mode in one session and it's now going to stay in Soldier mode forever, I'm not going to dare to transform it again for fear of breaking something.

I admit to having very little experience with the Sentinel Legioss toys, I picked up a green one 2 to 3 years ago and promptly snapped one of the hip joints on the first transformation  attempt. I was trying to follow the somewhat incomprehensible (at least to me) instruction manual pics. I neglected to watch any transformation videos at that time.........my bad. 😅

This time I actually watched the Scorched Earth Toys Transformation video, which helped a lot, although unlike in the video, the thighs on mine were super tight to extend. I thought I was gonna break the toy while  trying to extend them. Also, even after watching and pausing the video multiple times, I could not figure out the correct hip bar position for Diver mode. I managed to get it into Diver mode eventually, but still think I didn't get the hip joints correct. I'm super wary about the hips on these toys, due to my above-mentioned previous bad experience with the green Legioss. I was however able to follow the video to get the hip bars in the correct position for soldier mode.😅

My only other complaint about the toy is that the ankles on mine are super loose (the only loose joints on the toy). It kept wanting to tip forward in Diver mode due to the loose ankles.

I've recently been getting back into Mospeada and decided to get the Sentinel Legioss Eta to scratch my legioss itch as I didn't have any Legioss toys and although I've pre-ordered the Pose+ and the Takara Toyrise versions, they won't be released until 2026.

I also recently stepped back in after leaving once the Beagles came out. Bought the Beta/Tread (very solid) and a used Sentinel Alpha/Legioss from EBay (still underway).

I hope I don’t run into a lot of issues, I’ve heard about the wing flap so I also bought a reissue from Gundamit to display one as Armo soldier and connect one as Alpha/Beta. They’re 224 dollars over there if anyone is still looking. 

Edited September 11 by Tubes78

[Graham]

 

1 hour ago, Tubes78 said:

I also recently stepped back in after leaving once the Beagles came out. Bought the Beta/Tread (very solid) and a used Sentinel Alpha/Legioss from EBay (still underway).

I hope I don’t run into a lot of issues, I’ve heard about the wing flap so I also bought a reissue from Gundamit to display one as Armo soldier and connect one as Alpha/Beta. They’re 224 dollars over there if anyone is still looking. 

 My new Sentinel Legioss reissue doesn't have the flap issue. But one of the tail fins can get knocked off quite easily in fighter mode.

As mentioned, the only other issue I have with mine is loose ankle joints in Diver mode and very tight thigh extension and hip joints during my first and only transformation so far. 😅

[jenius]

You can recess the ankle joints in diver mode and that helps remove some of the play.

[RavenHawk]

On 9/7/2025 at 12:16 PM, MKT said:

I do hope Toyrise's Legioss do well so we continue to get other stuff inspired by Breaker's line. Safe to say Sentinel won't be releasing more of Breakers as Gate's ride armor didn't seem to do so well.    

I'm actually pretty bummed about that.

While I did have some gripes, the Genesis Breaker stuff really grew on me over time, and I was hoping for getting all of the other designs from the story/art.

[Mog]

Maybe the other female Ride Armor with the swords.

But the other two male designs were a bit much.  If they rearranged the weapons layout on the GBP-1S looking one, it would be better.