QuinJester Posted July 23, 2008 Share Posted July 23, 2008 Need larger image.... fnnnrrrrr Link to comment Share on other sites More sharing options...
wolfx Posted July 23, 2008 Share Posted July 23, 2008 Whoa momma! Finally a picture of a very correct looking fighter mode with all the landing gear deployed and the back portion of fighter mode transformed correctly. We need bigger pictures. Keep refining Bandai. Good work so far. Hmmm, is the front landing gear in the right position cuz it looks like its too near the nosecone. Link to comment Share on other sites More sharing options...
CF18 Posted July 24, 2008 Share Posted July 24, 2008 (edited) Hmmm, is the front landing gear in the right position cuz it looks like its too near the nosecone. It is the right position. You can see it the front gear in the opening song, right before the Cathy/Ozma part. Anther clear view is in ep 14, when Ozma stand in front of his VF-25. Edited July 24, 2008 by CF18 Link to comment Share on other sites More sharing options...
badboy00z Posted July 24, 2008 Share Posted July 24, 2008 Hmmm, is the front landing gear in the right position cuz it looks like its too near the nosecone. The nose cone folds into the land gear bay like in the SV-51 so it's in the right position. Link to comment Share on other sites More sharing options...
David Hingtgen Posted July 24, 2008 Share Posted July 24, 2008 Have we seen the belly of fighter mode yet? Because I found a scan showing it, but don't know if it's a "previously unseen" one or not. Also, "directly from the front, but from well above" view of battroid. Link to comment Share on other sites More sharing options...
Master Dex Posted July 24, 2008 Share Posted July 24, 2008 Have we seen the belly of fighter mode yet? Because I found a scan showing it, but don't know if it's a "previously unseen" one or not. Also, "directly from the front, but from well above" view of battroid. I'm not sure... you can go ahead and post it though, never hurts. Link to comment Share on other sites More sharing options...
danth Posted July 24, 2008 Share Posted July 24, 2008 Wait, how do we know this isn't the model? Link to comment Share on other sites More sharing options...
David Hingtgen Posted July 24, 2008 Share Posted July 24, 2008 Here they are, just in case they're "new": Link to comment Share on other sites More sharing options...
danth Posted July 24, 2008 Share Posted July 24, 2008 Here they are, just in case they're "new": Not sure if those pics are new, but the shoulders don't stick too far out in that pic. Nice. The legs are still attached too high on the codpiece. Link to comment Share on other sites More sharing options...
Master Dex Posted July 24, 2008 Share Posted July 24, 2008 Here they are, just in case they're "new": Ah yeah, I have seen them before but only once. They are good pics though so it wasn't a waste of time. Link to comment Share on other sites More sharing options...
Black Valkyrie Posted July 24, 2008 Share Posted July 24, 2008 Bigger pic plz. Link to comment Share on other sites More sharing options...
badboy00z Posted July 24, 2008 Share Posted July 24, 2008 hobby japan very small Where'd you get this picture at? Link to comment Share on other sites More sharing options...
Kyp Durron Posted July 24, 2008 Share Posted July 24, 2008 That port rear tail fin is leaning over way to far. I hope they have a way to lock into position, otherwise it will really suck if they're floppy. -Kyp Link to comment Share on other sites More sharing options...
badboy00z Posted July 24, 2008 Share Posted July 24, 2008 That port rear tail fin is leaning over way to far. I hope they have a way to lock into position, otherwise it will really suck if they're floppy. -Kyp They should use ratchets for those. Assuming that they can make them that small. Link to comment Share on other sites More sharing options...
1/1 LowViz Lurker Posted July 24, 2008 Share Posted July 24, 2008 I like how it looks so far. Bandai are putting a lot of effort into it. Is this the most complex transforming toy bandai has ever made? Link to comment Share on other sites More sharing options...
OmegaD3k Posted July 24, 2008 Share Posted July 24, 2008 Fighter mode reminds me of those Toynami Legioss fighters, which have the front fuselage section tilted a bit upwards. At least Bandai fixed the massive shoulder gaps... Link to comment Share on other sites More sharing options...
ruskiiVFaussie Posted July 24, 2008 Share Posted July 24, 2008 They should use ratchets for those. Assuming that they can make them that small. It would have to be wouldn't it? Getting 3 modes to look good and anime correct. But let's not give them that excuse to settle for less when they should strive to get the best result/s. Link to comment Share on other sites More sharing options...
Fort Max Posted July 24, 2008 Share Posted July 24, 2008 Loosk like Graham's not gonna regret his magazine purchases this month. Link to comment Share on other sites More sharing options...
Omegablue Posted July 24, 2008 Share Posted July 24, 2008 Hmmm... Looking at how they improved the shoulder joints, I'm now leaning more towards this than a 1/60... I can't both, or I would... Link to comment Share on other sites More sharing options...
1/1 LowViz Lurker Posted July 24, 2008 Share Posted July 24, 2008 (edited) Er...Is there a bigger picture or what?? Edited July 24, 2008 by 1/1 LowViz Lurker Link to comment Share on other sites More sharing options...
Dante74 Posted July 24, 2008 Share Posted July 24, 2008 Hmmm... Looking at how they improved the shoulder joints, I'm now leaning more towards this than a 1/60... I can't both, or I would... You CAN have both, this one is 1/60 too. Link to comment Share on other sites More sharing options...
Salamander Posted July 24, 2008 Share Posted July 24, 2008 I like how it looks so far. Bandai are putting a lot of effort into it. Is this the most complex transforming toy bandai has ever made? I really wish people would stop thinking that Bandai has never made complex transforming toys, or that Macross designs are inherently more complicated than other designs... Link to comment Share on other sites More sharing options...
1/1 LowViz Lurker Posted July 24, 2008 Share Posted July 24, 2008 (edited) I asked that as a question as I don't buy lots of toys. No need to get offended. Well is it? What's the most complex TF toy? I genuinely don't know. Edited July 24, 2008 by 1/1 LowViz Lurker Link to comment Share on other sites More sharing options...
eriku Posted July 24, 2008 Share Posted July 24, 2008 (edited) I asked that as a question as I don't buy lots of toys. No need to get offended. Well is it? What's the most complex TF toy? I genuinely don't know. It's hard to say without handling one. Bandai's Gunbuster and Aquarion toys are really complex, and it's hard to imagine this being more complex than those but until someone holds one and transforms it we are left to guess. The truth is Bandai does have years of experience making transforming toys, and making them stellar. Of course they are able to screw up just like any other company, but typically their quality and attention to detail with their high-end toys are something you can bank on. With the spendy stuff Bandai doesn't f*** around. Edited July 24, 2008 by eriku Link to comment Share on other sites More sharing options...
Cacophanus Posted July 24, 2008 Share Posted July 24, 2008 It's hard to say without handling one. Bandai's Gunbuster and Aquarion toys are really complex, and it's hard to imagine this being more complex than those but until someone holds one and transforms it we are left to guess. The truth is Bandai does have years of experience making transforming toys, and making them stellar. Of course they are able to screw up just like any other company, but typically their quality and attention to detail with their high-end toys are something you can bank on. With the spendy stuff Bandai doesn't f*** around. I reckon Aquarion is probably the most complex transforming toy they made and one that was the most accurate (the SOC Gunbuster has far too many extra appendages). The is is because the mecha in the anime was CG rendered, so the model and proportions already existed in a consistent format for Bandai to rework into something tangible. This is a similar situation to what we have with Frontier as well. The only real issue with Aquarion was that it just couldn't stand up under its own weight. That was more the fault of the design really, as it was very much top heavy. Link to comment Share on other sites More sharing options...
LadyLuck® Posted July 24, 2008 Share Posted July 24, 2008 and for the record Bandai have done a tremendous job on transforming toy-line, example SOC Voltes V and Combatler V note that these super robot didn't came from a CG design, although its not that perfect, they made a remarkable job to make the figure/expensive toy as anime accurate as posible. Not only that they also did a great job on combining and transforming Zords. Sorry for being optimistic, but do you think Yamato did a great job on molding on their pilots...Yes its not that perfect nor highly detailed but still we accept it because we bought it for Mecha not the pilot. As far as detail concern I really have strong faith in Bandai's tech. Have you seen 1/100 Amuro compared with 1/60 Yamato Macross pilots. Amuro's 1/100 is detailed you'll have problem painting it and they have the posibility of making a human figure as small as 1/144.(saw this in youtube on a Japanese show presenting bandai factory) I'm not saying that Bandai is that perfect. All I wanted to say in that we see to much wrong on the figure but we can't even notice their effort PEACEOUT Link to comment Share on other sites More sharing options...
mickayesou Posted July 25, 2008 Share Posted July 25, 2008 sunday 27 july presentation of the dx vf-25f and dx vf-25s more explication here tamashii web Link to comment Share on other sites More sharing options...
badboy00z Posted July 25, 2008 Share Posted July 25, 2008 I demand pictures the day of the event!! Link to comment Share on other sites More sharing options...
OmegaD3k Posted July 25, 2008 Share Posted July 25, 2008 Ditto! Will they present the final release versions, or the still somewhat-prototype-ish-before-release versions? Link to comment Share on other sites More sharing options...
Dante74 Posted July 25, 2008 Share Posted July 25, 2008 Link to comment Share on other sites More sharing options...
badboy00z Posted July 25, 2008 Share Posted July 25, 2008 I think all the pictures and links from this thread should be pinned to the first post for easy reference. Link to comment Share on other sites More sharing options...
Vifam7 Posted July 25, 2008 Share Posted July 25, 2008 Ditto! Will they present the final release versions, or the still somewhat-prototype-ish-before-release versions? Article says it will present a prototype at the event. Interestingly the article says it will also show "that other product" shown/hinted in previous events. No idea what it could be. Link to comment Share on other sites More sharing options...
Spitze Posted July 25, 2008 Share Posted July 25, 2008 Or even better a thunder sword..................................... OVERKILL! heaps of things Mr K can do to max out the valks to take on those Gundamers. You mean the radiant sword from Radiant Silvergun? But that would be cool, Macross taking que from shmups. Link to comment Share on other sites More sharing options...
ruskiiVFaussie Posted July 25, 2008 Share Posted July 25, 2008 (edited) You mean the radiant sword from Radiant Silvergun? But that would be cool, Macross taking que from shmups. Noo, Thunder Sword or whatever it's called, in the Thunder Force 4 game. It's an add on where you've just taken out a semi-boss, and then the music cranks with 'outstanding' genesis electric guitar music (lol) and another 3 ships come along and fly in formation and drop off the thunder sword parts and it then connects with your Rynex. It's basically a big arse energy beam that has short range and it vaporizes anything apart from a full boss's health bar. Good memories. Edited July 25, 2008 by ruskiiVFaussie Link to comment Share on other sites More sharing options...
mickayesou Posted July 26, 2008 Share Posted July 26, 2008 (edited) sorry ... Edited July 26, 2008 by mickayesou Link to comment Share on other sites More sharing options...
Recommended Posts