funkymonkeyjavajunky Posted July 11, 2014 Posted July 11, 2014 Low stock available on HLJ. I snagged one at a good price. Ok folks, go go go!!
ChaoticYeti Posted July 11, 2014 Posted July 11, 2014 Just picked up mine from the post office. Nice, crisp deco. Tight joints, like my vf-25a. Only issue is the bendy antennas. The one on the left aide of the head is curved inward. It won't sit flush in fighter mode. Not too much of an issue, since I plan to keep it in battroid, but the inclusion of rigid antennas would have been nice.
Falcon18 Posted July 11, 2014 Posted July 11, 2014 They did include the hard plastic head lasers. Check your tray with the stand. They're in there.
ChaoticYeti Posted July 11, 2014 Posted July 11, 2014 They did include the hard plastic head lasers. Check your tray with the stand. They're in there. Well, there you go.....I didn't open the stand. Thanks for the info!
Benbot Posted July 11, 2014 Posted July 11, 2014 I hope mine arrives today. Tracking said it went through customs (I think) 2 days ago, but there's been no location update since then.
twich Posted July 11, 2014 Posted July 11, 2014 I just received mine. I transformed it once to make sure that it didnt disintegrate like the nosecone on my Renewal VF-27y Fast Pack did. I like the way that they simplified the shoulders on these renewal YF/VF-25's! I have a version 1 VF-25F, and the thing is cracking all over the place, but hasnt fallen apart yet, the new age of the chunky monkey! Anyways, I am very pleased with my YF-25 Prophecy and it looks very nice next to my VF-27y. just a question, I replaced the rubbery/bendy antenna's with the hard plastic antenna's that came in the stand box. Does anyone else have a problem getting them to sit flush on the back of the valk in jet mode? Any suggestions? Thanks! Twich
Falcon18 Posted July 11, 2014 Posted July 11, 2014 Well, there you go.....I didn't open the stand. Thanks for the info! No problem. No reason for you to open it up eh since you've got wayy better stands than the dx ones.
ULessa Posted July 11, 2014 Posted July 11, 2014 Was contemplating on getting the HLJ one but I already have 5 Valks coming in... God damn thats alot of money...
ChaoticYeti Posted July 11, 2014 Posted July 11, 2014 No problem. No reason for you to open it up eh since you've got wayy better stands than the dx ones. That is exactly what happened. I need to get those going...
skullmilitia Posted July 12, 2014 Posted July 12, 2014 I must not have been paying attention to this thread, didn't realize the whole front fuselage was different from the previous. That's what I get haha.
Kanedas Bike Posted July 13, 2014 Posted July 13, 2014 just got my second one. You're late! The one I've opened shall remain in Battroid mode, I really don't like the more rounded, or bubble shape to the canopy in fighter mode. The sleekness of the canopy is one of the main appeals (to me) of the 25 series. -b.
Guest davidwhangchoi Posted July 13, 2014 Posted July 13, 2014 You're late! The one I've opened shall remain in Battroid mode, I really don't like the more rounded, or bubble shape to the canopy in fighter mode. The sleekness of the canopy is one of the main appeals (to me) of the 25 series. -b. lol
Gakken85 Posted July 13, 2014 Posted July 13, 2014 I wont transform mine. The joints will get loose. I swore off frontier... but this bird pulled me back in!
ChaoticYeti Posted July 13, 2014 Posted July 13, 2014 But....come on guys. What's the point unless you transform them once in awhile? (Stares at loose ankled $$$ YF-19 while a single tear rolls down his cheek, than smiles at second unopened $$$ YF-19). We are a weird bunch.
Kanedas Bike Posted July 13, 2014 Posted July 13, 2014 I wont transform mine. The joints will get loose. I swore off frontier... but this bird pulled me back in! Those joints better not, they're holding up damn well on the 25A that I have in Battroid mode. Other 25 Renewals (looking at you very first release 25F and especially Alto 29) have had some looseness over time but my hope and thought is the 25A and YF-25 will do much better. I have faith in the YF-25 to hold up well. But....come on guys. What's the point unless you transform them once in awhile? (Stares at loose ankled $$$ YF-19 while a single tear rolls down his cheek, than smiles at second unopened $$$ YF-19). We are a weird bunch. And see, that's why I refuse to transform my Arcadia YF-19!!!! And yes, yes we are. Even if to be fair, some releases, varying across item and manufacturer are very safe to transform while others are not. -b.
The Old Man Posted July 13, 2014 Posted July 13, 2014 I swore off frontier... but this bird pulled me back in!
Mommar Posted July 13, 2014 Posted July 13, 2014 I'm still wondering if there's any particular type of glue that works best with the Bandai plastics? The small back half of the base the left tail fin attaches to still isn't glued down and I don't want to mess up the plastic using the wrong kind of glue to hold it.
typhoon Posted July 13, 2014 Posted July 13, 2014 A little late to the party.... Received my two copies and "broke the seal" yesterday. Really loving the colours, both of my copies have a small scratch on the right wing where it slides into the fuselage, it's right through the orange into the white of the plastic. Both have awkward fitting front landing gear doors, they refuse to sit flush in fighter (not a problem in battroid). There's a little paint slop here and there, but overall they are nice pieces to add to the collection.
Valkyrie Magnus Posted July 13, 2014 Posted July 13, 2014 I like the VF-25G super parts on the YF-25 but what about putting VF-25G Tornado Armor on it? I think I might buy an extra set and put it on my 2nd YF-25.
xrentonx Posted July 14, 2014 Posted July 14, 2014 Got both of my copies and only inspected fighter mode so far. I'm gonna go in for a thorough look at the end of this week. Been recovering from pink eye (after coming back from my vacation too)
Saburo Posted July 14, 2014 Posted July 14, 2014 I like the VF-25G super parts on the YF-25 but what about putting VF-25G Tornado Armor on it? I think I might buy an extra set and put it on my 2nd YF-25. I will have to give that a try.
funkymonkeyjavajunky Posted July 19, 2014 Posted July 19, 2014 In stock at CDJapan: http://www.cdjapan.co.jp/product/NEOGDS-106908 Good price too.
Pedro2k6 Posted July 24, 2014 Posted July 24, 2014 YF-25 in stock again on Amiami http://www.amiami.com/top/detail/detail?gcode=FIGURE-004931&page=top%2Fsearch%2Flist%3Fs_keywords%3DMacross+chogokin%24pagemax%3D20%24getcnt%3D0%24pagecnt%3D1
Valkyrie2008 Posted July 24, 2014 Posted July 24, 2014 YF-25 in stock again on Amiami http://www.amiami.com/top/detail/detail?gcode=FIGURE-004931&page=top%2Fsearch%2Flist%3Fs_keywords%3DMacross+chogokin%24pagemax%3D20%24getcnt%3D0%24pagecnt%3D1 Thanks!
BlueMax Posted July 24, 2014 Posted July 24, 2014 YF-25 in stock again on Amiami http://www.amiami.com/top/detail/detail?gcode=FIGURE-004931&page=top%2Fsearch%2Flist%3Fs_keywords%3DMacross+chogokin%24pagemax%3D20%24getcnt%3D0%24pagecnt%3D1 Thanks for the heads up! Got one finally! Still waiting to get the YF-29 Ozma and YF-30 at reasonable prices.
Valk-1S Posted July 24, 2014 Posted July 24, 2014 Still waiting for mine to be delivered from CDjapan Almost 5 weeks now since they sent it out. This is the longest I ever have to wait for a SAL package to reach me.
YF-29 Durandal Posted July 24, 2014 Posted July 24, 2014 Still waiting for mine to be delivered from CDjapan Almost 5 weeks now since they sent it out. This is the longest I ever have to wait for a SAL package to reach me. I urge you to check so that it isn't stuck in the australian customs since any package from Japan to Australia should never take five weeks.
Valk-1S Posted July 24, 2014 Posted July 24, 2014 I urge you to check so that it isn't stuck in the australian customs since any package from Japan to Australia should never take five weeks. Doubt its stuck at customs as Australia Customs pretty good as it the items are below $1,000, it duty free. I'll see whether it turns up next Monday, if not will follow up with the post office. Wished Japan didn't stop registered SAL.
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now