GGemini Posted January 9, 2010 Share Posted January 9, 2010 Updated pic of the 4 I have replaced: two VF-1J (not counting the one with the GBP... that one hast stress marks only), a VF-1A and a VF-1S: Quote Link to comment Share on other sites More sharing options...
mr.chogokin Posted January 9, 2010 Share Posted January 9, 2010 Taking these pictures... it's like we have a new past time instead of enjoying the valks properly. Quote Link to comment Share on other sites More sharing options...
regult Posted January 9, 2010 Share Posted January 9, 2010 (edited) Pictures of the 2 broken shoulder connectors of the VF-1S Fokker, stad alone, first edition. Realized both were broken a while ago, the other example is in storage somewhere hard to reach at the moment. Wrote to Overdrive a long time ago and never got their reply... It's not a matter of changing the pin only: I think they should change the material of the piece, but metal may not do because the piece needs to be a bit flexible so it can pas over that bump to stay in place in battroid and gerwalk modes. Edited January 9, 2010 by regult Quote Link to comment Share on other sites More sharing options...
rsvictor1976 Posted January 9, 2010 Share Posted January 9, 2010 I can't believe we spend so much money on these defective toys. Yamato has been doing this to us for a long time now and we keep coming back to spend more. Quote Link to comment Share on other sites More sharing options...
sidearmsalpha Posted January 9, 2010 Share Posted January 9, 2010 Here is a picture of my VF-1A Hikaru with a cracked right shoulder hinge after only a couple transformations. I also checked out my out-of-box VF-1D, and that one is fine with the smooth pins. I still have a few more to check that I hope to get to today, but I have to pull them out of their boxes. Quote Link to comment Share on other sites More sharing options...
bluemax151 Posted January 9, 2010 Share Posted January 9, 2010 I can't post a picture because I've already fixed it with putty but my Strike Roy had both shoulders crack from sitting in the box (only transformed twice). Max TV 1A, Kakizaki TV 1A, M&M1Js and Virgin Road 1D fine so far. Quote Link to comment Share on other sites More sharing options...
niVL@Boy Posted January 9, 2010 Share Posted January 9, 2010 Here are pics of my VF-1S with both shoulders breaking ......(the rest of my other v2 valks are still in their boxes, will check them later and post more pics) Quote Link to comment Share on other sites More sharing options...
David Hingtgen Posted January 9, 2010 Share Posted January 9, 2010 I can't post a picture because I've already fixed it with putty but my Strike Roy had both shoulders crack from sitting in the box (only transformed twice). So long as it "obviously looks repaired" I still think it'd be useful to post a pic. Quote Link to comment Share on other sites More sharing options...
sidearmsalpha Posted January 10, 2010 Share Posted January 10, 2010 Ok, I hope Graham is able to convince Yamato to come up with a reasonable solution for providing replacement shoulders for non-Japanese collectors, because this is f'in ridiculous! Besides the VF-1A Hikaru I posted a pic of a few posts back (posted again here), I have a VF-1S Roy that has a noticeably cracked right shoulder and a hairline crack on the left shoulder, and I never even transformed it! I also have a VF-1J Hikaru with a hairline crack on the left shoulder, only transformed once before! Now, this is where I'm really pissed!!! I picked up a couple of brand new VF-1A Hikarus with the Super/Strike Parts for a good deal awhile back. These have been sitting in their boxes ever since. Today, I opened them for the first time! One has a cracked shoulder, and the other has both shoulders cracked!!! Just look at the pictures. Unbelievable! The VF-1J CF, VF-1A TV Kakizaki, and my extra VF-1D are fine as the pins look like they are smooth. I have a VF-1S Hikaru that appears fine for now, but I'll have to remove the pins and smooth down the knurling just to be sure. Well, I'm done with Yamato for the foreseeable future unless they can rectify this problem. Quote Link to comment Share on other sites More sharing options...
ChristopherB Posted January 10, 2010 Share Posted January 10, 2010 If past performance is an indication of future behavior, then Yamato will not provide any replacement parts to customers living outside their limited service area. Instead they will release V3, which will eliminate the shoulder problem, provide various upgrades taken directly from MW, while at the same time introducing another point of breakage in anticipation of V4. I checked last night and the Max VF-1S and Hikaru VF-1J weathered versions both utilize smooth pins. Hopefull the Focker VF-1S weathered will follow suit. Quote Link to comment Share on other sites More sharing options...
getterprime Posted January 11, 2010 Share Posted January 11, 2010 I don't have ready access to a camera at the moment but I'll post pictures if I can. My 1st release Focker 1S has a crack on the left shoulder after checking today---plus the canopy finish has flaked/cracked. Up until now the hinges seemed fine with the total of about 6 transformations done, gently handled for the almost 2 years of owning. The 1D and TV Max 1A I have look okay so far. Quote Link to comment Share on other sites More sharing options...
sidearmsalpha Posted January 11, 2010 Share Posted January 11, 2010 My friend, vf2ss, and I have started to notice the flaking of the film on the canopies of some of ours, too. It was a great idea, but it seems like it was poorly executed. I don't think I've had my first 1/60 for more than a year. I'll have to end up rubbing the film off on all of them eventually. Quote Link to comment Share on other sites More sharing options...
Kicker773 Posted January 11, 2010 Share Posted January 11, 2010 tsk tsk tsk.. hit or miss i guess.. but what are the chances of the shop owner letting you inspect the valk out of the box.. man all signs are pointing to not jump into the V2 1/60, but that damn white/blank one is lookign pretty tempting. Quote Link to comment Share on other sites More sharing options...
southpaw Posted February 2, 2010 Share Posted February 2, 2010 just rechecked my vf-1s hikaru strike. It is mib and it shows slight stress marks already and i haven't even transformed it. i also have a vf-1s hikaru without the fast pack that has been transformed a dozen of times . i noticed that it does have a stress mark there also. Since they haven't actually broke yet. Will yamato offer /sell shoulder joints to those who's vf1's havent broken yet but clearly a sign that they will because of stress marks that are already there even whtn the toy has been taken out of the box twice asper my strike. Quote Link to comment Share on other sites More sharing options...
jenius Posted February 3, 2010 Share Posted February 3, 2010 Am I late to this party? How do I go about ordering replacement shoulders for my toys? I definitely need two VF-1S shoulders because both are broken on my first edition toy and both the replacements were broken in the bag they were sent in. Are we allowed to order for all of the toys we think might have the thick pin? Quote Link to comment Share on other sites More sharing options...
Peaugh Posted February 7, 2010 Share Posted February 7, 2010 Shame. My DYRL Roy with Super/Strike parts has teh smooth pins and no issues during several transformations thus far. I really want to pick up the 1/60 VF-1J with Armored parts that was released a couple months back, but not unless I can confirm it's the smooth pins. Anyone know? Quote Link to comment Share on other sites More sharing options...
jenius Posted February 7, 2010 Share Posted February 7, 2010 the gbp combo has been confirmed as having tthe bad pins Quote Link to comment Share on other sites More sharing options...
fifbeat Posted February 7, 2010 Share Posted February 7, 2010 Pfft... if that's the case, Yamato should actually include shoulder/pin replacements on the side. I'm going to wait til they're packed with the right pins. Jenius: When can we expect a review? =) Quote Link to comment Share on other sites More sharing options...
Peaugh Posted February 7, 2010 Share Posted February 7, 2010 the gbp combo has been confirmed as having tthe bad pins That's what I needed to know. Thanks! Quote Link to comment Share on other sites More sharing options...
EXO Posted February 7, 2010 Share Posted February 7, 2010 Mine has the bad pins. Your Roy has smooth pins? Were they reissued? Quote Link to comment Share on other sites More sharing options...
jenius Posted February 7, 2010 Share Posted February 7, 2010 Pfft... if that's the case, Yamato should actually include shoulder/pin replacements on the side. I'm going to wait til they're packed with the right pins. Jenius: When can we expect a review? =) My table currently has the following toys on it: 1) Anniversary VF-1S Focker 1/60 V2 2) Takatoku GBP + Hikaru 1J 1/55 (Hik is reissue) 3) Yamato V1 1/60 Hik+GBP combo 4) Yamato V2 1/60 Hik+GBP combo 5) Yamato V2 SuperOstrich 6) Yamato V2 Elintseeker 7) CMs Character figure box (still unopened) Not yet on the table: 1) Yamato Hikaru 1J + GBP in 1/48 scale 2) Bandai 1/60 DX VF-25S + Armor I was hoping to get my GBP review up sooner than later but with all the comparisons I'm doing with other versions of the toy it looks like it's going to take a while. Quote Link to comment Share on other sites More sharing options...
anotheran Posted February 8, 2010 Share Posted February 8, 2010 how do you guys push out the pins? My Vf-1S Hikaru has pretty tight pins. Quote Link to comment Share on other sites More sharing options...
Graham Posted February 8, 2010 Share Posted February 8, 2010 A quick update: 1) Some good news, the replacement shoulder hinges should be arriving today. 2) Some more good news. There should be enough for everybody that has requested them so far (a larger quantity is being provided than was expected). 3) Anticipate these will start shipping out to members round end of February. Sorry, the 'alternate source' is busy until then. 4) PM me your shipping address if you have not yet done so. Graham Quote Link to comment Share on other sites More sharing options...
David Hingtgen Posted February 8, 2010 Share Posted February 8, 2010 So, did Yamato send a mix of pure white, light grey, etc hinges to the alternate source, so that everyone can get the right colors, too? Quote Link to comment Share on other sites More sharing options...
Graham Posted February 8, 2010 Share Posted February 8, 2010 From what I understand, it is a mix of 1) cream for VT/VF-1D, 2) off-white for DYRL VF-1A/S 3) bright white for the TV VF-1J. Not arrived yet. Graham Quote Link to comment Share on other sites More sharing options...
UN Spacy Posted February 8, 2010 Share Posted February 8, 2010 I believe I replied but I haven't posted my pictures before. I just checked my VF-1D and VF-1J which seem fine. But my Roy Focker VF-1S is a whole different story. PM sent Graham. 1st image right shoulder, 2nd image left shoulder. Quote Link to comment Share on other sites More sharing options...
Jepoyako Posted February 8, 2010 Share Posted February 8, 2010 Am I too late in ordering replacement hinges? I've been out of the loop... V2 VF-1J V2 VF-1S right and left Quote Link to comment Share on other sites More sharing options...
Black Valkyrie Posted February 8, 2010 Share Posted February 8, 2010 May be Yamato should put more PVC into their VFs. Quote Link to comment Share on other sites More sharing options...
Graham Posted February 8, 2010 Share Posted February 8, 2010 Crappy phone camera pic of what just arrived on the 'alternate source's' desk. Each and every hinge will be inspected before it is shipped to make sure it is free of stress marks or cracks and has a pin that is smooth on both ends. PM your address if you haven't already. These will ship out starting end of Feb. You will be contacted with payment details for the shipping charges. Graham Quote Link to comment Share on other sites More sharing options...
BlueMax Posted February 8, 2010 Share Posted February 8, 2010 Wow... that is quite a lot of hinges! Looking forward to mine! Quote Link to comment Share on other sites More sharing options...
Chronocidal Posted February 8, 2010 Share Posted February 8, 2010 (edited) PM your address if you haven't already. These will ship out starting end of Feb. You will be contacted with payment details for the shipping charges. Graham Just to clarify, there are enough available to place an order now? (as opposed to earlier when it was announced) I wasn't sure if they were being ordered in bulk, or just to fill the current demand. If so, I'll send a pm shortly. Edited February 8, 2010 by Chronocidal Quote Link to comment Share on other sites More sharing options...
Shaorin Posted February 8, 2010 Share Posted February 8, 2010 (edited) funny, i've had my VF-1J Hikaru T.V. for over a year now, with MANY transformations, and i have encountered no shoulder-joint problems. in fact, IMO, the VF-1 1/60 v.2 is the very best looking and most durable rendition of the VF-1 to date. have i just been lucky, or did YAMATO just get it all right with this variant? Edited February 8, 2010 by Shaorin Quote Link to comment Share on other sites More sharing options...
Valkyrie addict Posted February 8, 2010 Share Posted February 8, 2010 (edited) Impressive nice work, thanks Graham, any word if Yamato will somehow mark the boxes in their new batch of checked hinges VF's? Edited February 8, 2010 by Valkyrie addict Quote Link to comment Share on other sites More sharing options...
anotheran Posted February 8, 2010 Share Posted February 8, 2010 @graham are you taking new orders? Quote Link to comment Share on other sites More sharing options...
Ivan Posted February 8, 2010 Share Posted February 8, 2010 funny, i've had my VF-1J Hikaru T.V. for over a year now, with MANY transformations, and i have encountered no shoulder-joint problems. in fact, IMO, the VF-1 1/60 v.2 is the very best looking and most durable rendition of the VF-1 to date. have i just been lucky, or did YAMATO just get it all right with this variant? From what I was told, I don't think the stand-alone Hikaru 1J has any issue. It's the one with fast packs that have the defective shoulders. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.