no3Ljm Posted August 12, 2014 Share Posted August 12, 2014 (edited) Hey guys, been lurking for a bit. I've collected from the 1/48 and 1/60 line, but collecting from the renewal series is ridiculous. Over two years and still can't order an Ozma lee. I did manage to order a VF25G, but unfortunately the crotch piece broke, so now it can't stand. I only transformed it once, into battroid mode, and displayed it in that mode for about a year. Any suggestions on how to fix it? Thanks and sorry if this is the incorrect place to post this message. Yup. PIcture would be nice. As for Ozma's 25S, try your luck on pre-ordering at Play-Asia since most of the pre-orders from the major shops are already closed. But it's not a guarantee if we can get it from there since up to now they're still accepting pre-orders with out limit, where it should be close now assuming a lot of people and scalpers already placed bulk orders with them. http://www.play-asia.com/dx-chogokin-macross-frontier-vf-25s-messiah-valkyrie-ozma-lee-cu-paOS-13-49-en-70-81rx.html Edited August 12, 2014 by no3ljm Quote Link to comment Share on other sites More sharing options...
Guest davidwhangchoi Posted August 12, 2014 Share Posted August 12, 2014 ??? As for Ozma's 25S, try your luck on pre-ordering at Play-Asia since most of the pre-orders from the major shops are already closed. But it's not a guarantee if we can get it from there since up to now they're still accepting pre-orders with out limit, where it should be close now assuming a lot of people and scalpers already placed bulk orders with them. http://www.play-asia.com/dx-chogokin-macross-frontier-vf-25s-messiah-valkyrie-ozma-lee-cu-paOS-13-49-en-70-81rx.html (every time there's something that doesn't make sense i'm going to post:) ??? Quote Link to comment Share on other sites More sharing options...
no3Ljm Posted August 12, 2014 Share Posted August 12, 2014 Ouch. Quote Link to comment Share on other sites More sharing options...
Guest davidwhangchoi Posted August 12, 2014 Share Posted August 12, 2014 Ouch. Quote Link to comment Share on other sites More sharing options...
vsim Posted August 12, 2014 Share Posted August 12, 2014 Yeah, I placed my order with Play Asia, but I'm not betting on it. If I see another pre-order I can get in on time, I'm going to do it. Quote Link to comment Share on other sites More sharing options...
sreichma Posted August 12, 2014 Share Posted August 12, 2014 Will buy one for over 225-275 on the day of release. Reality is Reality and I'm still saving 1-200 based on current prices. Quote Link to comment Share on other sites More sharing options...
Gakken85 Posted August 12, 2014 Share Posted August 12, 2014 It's been open for days. I doubt that many frontier valks were ever made... period. haha Quote Link to comment Share on other sites More sharing options...
BuGS21 Posted August 12, 2014 Share Posted August 12, 2014 ^^ True that. Quote Link to comment Share on other sites More sharing options...
Kanedas Bike Posted August 12, 2014 Share Posted August 12, 2014 ??? (every time there's something that doesn't make sense i'm going to post:) ??? Ouch. True story, I used to have a boss that would sent that via email. And I swore I'd never do that once I was promoted to a leadership position. Then low and behold I'd get some truly, jaw dropping, you've got to be kidding me, dumb questions or statements. And out came the "???". So ouch and indeed. It's been open for days. I doubt that many frontier valks were ever made... period. haha Right! -b. Quote Link to comment Share on other sites More sharing options...
M'Kyuun Posted August 12, 2014 Share Posted August 12, 2014 Just put in my pre-order with Play-Asia. I've never ordered with them before, so I hope there are no issues. At $142, it's still reasonably priced, and I've been wanting this valk since Frontier came out. Anyway, they took my money; they'd better give me my toy! Quote Link to comment Share on other sites More sharing options...
Guest davidwhangchoi Posted August 12, 2014 Share Posted August 12, 2014 (edited) ??? lol Edited August 12, 2014 by davidwhangchoi Quote Link to comment Share on other sites More sharing options...
Duymon Posted August 12, 2014 Share Posted August 12, 2014 This is beginning to remind me of the forever open RVF-25 preorders at Hobbyfan. Only 5% of the preorders were fulfilled there. It'd be a safer bet to get a refund and then wait until late October / early November when retailers get their actual allotment numbers. If the last two releases were any indication preorders did open up again at various sites and the majority of people were able to secure the valks at or even below retail. Quote Link to comment Share on other sites More sharing options...
sreichma Posted August 12, 2014 Share Posted August 12, 2014 VF-25S on Ebay....GO GO GO http://www.ebay.com/itm/DX-Chogokin-VF-25S-Messiah-Valkyrie-Ozma-Lee-Custom-Renewal-Ver-/111415463084?pt=US_Action_Figures&hash=item19f0e10cac#ht_2204wt_1001 Quote Link to comment Share on other sites More sharing options...
NightCastle Posted August 12, 2014 Share Posted August 12, 2014 VF-25S on Ebay....GO GO GO http://www.ebay.com/itm/DX-Chogokin-VF-25S-Messiah-Valkyrie-Ozma-Lee-Custom-Renewal-Ver-/111415463084?pt=US_Action_Figures&hash=item19f0e10cac#ht_2204wt_1001 AHAHAHAHAHAHAHA!!!! Quote Link to comment Share on other sites More sharing options...
Valkyrie2008 Posted August 12, 2014 Share Posted August 12, 2014 VF-25S on Ebay....GO GO GO http://www.ebay.com/itm/DX-Chogokin-VF-25S-Messiah-Valkyrie-Ozma-Lee-Custom-Renewal-Ver-/111415463084?pt=US_Action_Figures&hash=item19f0e10cac#ht_2204wt_1001 I'll buy that for a DOLLAR! Quote Link to comment Share on other sites More sharing options...
sreichma Posted August 12, 2014 Share Posted August 12, 2014 Had to lighten the tone on the thread. Just don't give up folks, we will all get one. Just give it time. Quote Link to comment Share on other sites More sharing options...
Gakken85 Posted August 12, 2014 Share Posted August 12, 2014 ZOMG. Quote Link to comment Share on other sites More sharing options...
vsim Posted August 13, 2014 Share Posted August 13, 2014 lol, nice. Quote Link to comment Share on other sites More sharing options...
Falcon18 Posted August 13, 2014 Share Posted August 13, 2014 And people are still selling their Ozmas for ridiculous prices. Lol. All those who ordered from play-asia. Good luck guys. Hope all goes well. Quote Link to comment Share on other sites More sharing options...
beatsing Posted August 13, 2014 Share Posted August 13, 2014 Yup. PIcture would be nice. As for Ozma's 25S, try your luck on pre-ordering at Play-Asia since most of the pre-orders from the major shops are already closed. But it's not a guarantee if we can get it from there since up to now they're still accepting pre-orders with out limit, where it should be close now assuming a lot of people and scalpers already placed bulk orders with them. http://www.play-asia.com/dx-chogokin-macross-frontier-vf-25s-messiah-valkyrie-ozma-lee-cu-paOS-13-49-en-70-81rx.html Hi thanks for the play asia suggestion. Made my order. This vf25g stood on its own in a display case. Didnt swoosh it or anything. I only noticed the crack when i was thinking it was time switch it back to jet mode. Sure enough it was broken. Here are the photos: Quote Link to comment Share on other sites More sharing options...
Chronocidal Posted August 13, 2014 Share Posted August 13, 2014 I dunno what it is with valks and some pieces just completely exploding. That's painful. Fortunately, if you could actually manage to get the thing apart, that seems like it would be a really easy part to come up with a replacement for. It's just a bar with two holes in it. Quote Link to comment Share on other sites More sharing options...
mechaninac Posted August 13, 2014 Share Posted August 13, 2014 Chronocidal is right, if the assembly can be take apart, that part looks to be easily repairable with plastic weld, or easily replaced with a substitute carved out of styrene block, or swapped with a Shapeways facsimile. Still sucks that it sheared right at the hinge pin like that... yet one more thing to keep an eye out for with these Bandai DXs. Quote Link to comment Share on other sites More sharing options...
F360 Posted August 13, 2014 Share Posted August 13, 2014 Seems play Asia finally closed their preorder. Quote Link to comment Share on other sites More sharing options...
chyll2 Posted August 13, 2014 Share Posted August 13, 2014 Chronocidal is right, if the assembly can be take apart, that part looks to be easily repairable with plastic weld, or easily replaced with a substitute carved out of styrene block, or swapped with a Shapeways facsimile. Still sucks that it sheared right at the hinge pin like that... yet one more thing to keep an eye out for with these Bandai DXs. the whole front fuselage can be easily disassembled after removing the pins (this is the hardest part, and so far I am not successful) then everything are just screws, there are no glues. seeing that broken plastic has a big area, Plastic weld will easily solve this once fully dis-assembled. Quote Link to comment Share on other sites More sharing options...
Bahamutzyro Posted August 13, 2014 Share Posted August 13, 2014 Wow, those a-holes upped the price haha no actually i got it for 72.00 and then i think they raised it lol Quote Link to comment Share on other sites More sharing options...
pikashoo Posted August 13, 2014 Share Posted August 13, 2014 was there any difference in the first release alto renewals and the reissues? Quote Link to comment Share on other sites More sharing options...
chyll2 Posted August 13, 2014 Share Posted August 13, 2014 (edited) was there any difference in the first release alto renewals and the reissues? from what I heard, less mold agent release in the plastic and tighter joint (similar to 25A) Edited August 13, 2014 by chyll2 Quote Link to comment Share on other sites More sharing options...
Kyp Durron Posted August 13, 2014 Share Posted August 13, 2014 Seems play Asia finally closed their preorder. And will most likely be only about 5,000 short of filling all orders, give or take a dozen or so. Quote Link to comment Share on other sites More sharing options...
Kanedas Bike Posted August 13, 2014 Share Posted August 13, 2014 Seems play Asia finally closed their preorder. Would love to know how many units have been ordered with them. And will most likely be only about 5,000 short of filling all orders, give or take a dozen or so. As long as they left the order open, at least. I feel sorry for their customer service folks who will have to answer a gazillion emails about cancelled orders because they couldn't secure enough stock. -b. Quote Link to comment Share on other sites More sharing options...
Gakken85 Posted August 13, 2014 Share Posted August 13, 2014 Quote Link to comment Share on other sites More sharing options...
Kanedas Bike Posted August 13, 2014 Share Posted August 13, 2014 ^LOL - right. And as a collector you literally need an Eagle, Gandalf or a Ring of Power or two just go get an order placed. -b. Quote Link to comment Share on other sites More sharing options...
vsim Posted August 13, 2014 Share Posted August 13, 2014 The downside (for my wallet) to this is that while continuing to hunt for an Ozma, I've ordered a Luca Ghost Super Parts set, a Isamu Durandal, a Prophecy, and a YF-30, lol. On the up side, I now have a Luca Ghost Super Parts set, Isamu Durandal, Prophecy, and YF-30 ordered . Oh, and I think I snagged an Alto Renewal as well finally. I did resist a few purchases, honest!!! Quote Link to comment Share on other sites More sharing options...
chyll2 Posted August 13, 2014 Share Posted August 13, 2014 The downside (for my wallet) to this is that while continuing to hunt for an Ozma, I've ordered a Luca Ghost Super Parts set, a Isamu Durandal, a Prophecy, and a YF-30, lol. On the up side, I now have a Luca Ghost Super Parts set, Isamu Durandal, Prophecy, and YF-30 ordered . Oh, and I think I snagged an Alto Renewal as well finally. I did resist a few purchases, honest!!! so the question is, where you abel to get an Ozma Quote Link to comment Share on other sites More sharing options...
Guest davidwhangchoi Posted August 13, 2014 Share Posted August 13, 2014 (edited) i'm not going to make fun of people who pre-ordered bc there's no risk involved. as i would be in for a pre-order just for a cancellation. i'm just going to laugh at those who later complain their order didn't go through... despite the multiple warnings and then state: we have some truly dumb clueless people on the internet. Edited August 13, 2014 by davidwhangchoi Quote Link to comment Share on other sites More sharing options...
vsim Posted August 13, 2014 Share Posted August 13, 2014 so the question is, where you abel to get an Ozma No damnit! lol. I'm still hunting, which is why I'm still finding other stuff I want. Bandai's strategy is working quite well on me, grrrr. On the plus side, I've gotten decent prices on most of them. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.