maxjr Posted November 8, 2007 Posted November 8, 2007 (edited) Hi, everyone. I started this project way back in 2004, after working on it on and off for around three and a half years, my very first marcross model is finally done! I chose to paint it in a low-visibility scheme instead of the original one. I didn't do any weathering since I like models to be clean and neat. I replaced the original HUD part with a piece of thin clear plastic sheet. I also added a Wave h-eyes for the projector lens. Edited November 9, 2007 by maxjr
maxjr Posted November 8, 2007 Author Posted November 8, 2007 Here are some WIP pics. Photo-etched seat belts were added. The emergency ejection pull handles were made by a thin brass rod. The part in the green circle was Kotobukiya's option parts. I fill the gaps around the head with some styrene strips. The intake covers were extended with styrene strips. The airbrake was thinned and holes were drilled. The magnet method to attach the fast packs was learned from wm cheng's post. I scatch built this part with 0.3mm styrene sheets to replace the original part (green circle). The insides of the burners were detailed with thin styrene strips.
maxjr Posted November 8, 2007 Author Posted November 8, 2007 (edited) The land gears and gear bays were also detailed using thin styrene strips. A lot of puttying and sanding needed before painting All the panel lines and rivets were deepened using hasegawa's modeling scriber. Edited November 8, 2007 by maxjr
warpaint22 Posted November 8, 2007 Posted November 8, 2007 That's one very nice model and I also am a fan of clean looking models. All those extra touches really make your model stand out and the low vis looks great also. Congrats on a top looking model.
Berttt Posted November 8, 2007 Posted November 8, 2007 Congratulations on a top model. That really is some good work there and I hope you don't mind but I am going to blatantly steal some of your ideas. Cheers, Berttt
cool8or Posted November 8, 2007 Posted November 8, 2007 Looks Perfect! And your improvements are very valuables and useful. I'll have it in mind ....
baronv Posted November 8, 2007 Posted November 8, 2007 Whoa, great job for your first Macross model. Very neat, clean and detailed.
jardann Posted November 8, 2007 Posted November 8, 2007 Awesome job on that! The small additions to the gear bays and doors makes a big improvement. I'll have to try that on my next built. Very smooth paint job too. I look forward to seeing some more from you in the future.
big F Posted November 8, 2007 Posted November 8, 2007 Even though you didnt do any weathering (my favorite thing) I dont think you need it on this one as it looks great. The greys make it look like it might be dirty and weathered. The little touches are excellent and I would love to know more about the ones not covered by others here at MW.
ce25254 Posted November 8, 2007 Posted November 8, 2007 The part in the green circle was Kotobukiya's option parts. Looks great, wow, what cockpit detail! Do you happen to know which set provides that jet/handle thing in the green circle? Is it plastic or photo-etched parts? Thanks!
drkstar00 Posted November 9, 2007 Posted November 9, 2007 This' how I want my models to look eventually!
Ignacio Ocamica Posted November 9, 2007 Posted November 9, 2007 What can I say that hasn't been said? Simply brilliant
maxjr Posted November 9, 2007 Author Posted November 9, 2007 Congratulations on a top model. That really is some good work there and I hope you don't mind but I am going to blatantly steal some of your ideas. Cheers, Berttt Honestly, most of them aren't really my ideas, I "stole" them from the Apr 2004 issue of Hobby Japan.
maxjr Posted November 9, 2007 Author Posted November 9, 2007 Looks great, wow, what cockpit detail! Do you happen to know which set provides that jet/handle thing in the green circle? Is it plastic or photo-etched parts? Thanks! The tiny little round thing is from a Kotobukiya option set called "vernier nozzle III", link They are plastic and come in different sizes, the smallest one fits right with the macross kit.
ce25254 Posted November 9, 2007 Posted November 9, 2007 The tiny little round thing is from a Kotobukiya option set called "vernier nozzle III", link They are plastic and come in different sizes, the smallest one fits right with the macross kit. It looks like you also used these on the jet/handle located near the wing root ? (I guess these things are actually called vernier thrusters? I always thought they were some kind of handle! ) I wonder if they are the right size to use on a Hasegawa VF-1. Has anyone tried this? I have the photo-etched parts set, but those nozzle parts are still flat. Did you fabricate the "handle" to go over the top of the Kotobukiya nozzle from styrene strip?
big F Posted November 9, 2007 Posted November 9, 2007 It looks like you also used these on the jet/handle located near the wing root ? (I guess these things are actually called vernier thrusters? I always thought they were some kind of handle! ) I wonder if they are the right size to use on a Hasegawa VF-1. Has anyone tried this? I have the photo-etched parts set, but those nozzle parts are still flat. Did you fabricate the "handle" to go over the top of the Kotobukiya nozzle from styrene strip? I got some of these for my 1/55 valks and I have all the smaller ones for spares so my VF0 WILL have them implanted.
JuanJovv Posted November 10, 2007 Posted November 10, 2007 wonderfull work the clear paint is great job thanks for charity your picks whit us regards
maxjr Posted November 10, 2007 Author Posted November 10, 2007 It looks like you also used these on the jet/handle located near the wing root ? (I guess these things are actually called vernier thrusters? I always thought they were some kind of handle! ) I wonder if they are the right size to use on a Hasegawa VF-1. Has anyone tried this? I have the photo-etched parts set, but those nozzle parts are still flat. Did you fabricate the "handle" to go over the top of the Kotobukiya nozzle from styrene strip? I used a total of 4 nozzles on this kit. No fabrication was needed for the handle, I just glued a piece of styrene strip in the middle of the nozzle. I think they will fit the vf-1 as well but not 100% sure since I haven't bought any other macross models beside the one I just finished.
big F Posted November 10, 2007 Posted November 10, 2007 Any chance you could post scans of the relavant pages from Apr 2004 Hobby Japan, I dont have that one and Im sure that there are plenty here you dont eaither.
Valkyrie addict Posted November 10, 2007 Posted November 10, 2007 A-M-A-Z-I-N-G and a mayor props for having such patience to take 3 years to carefully do it!
maxjr Posted November 10, 2007 Author Posted November 10, 2007 Any chance you could post scans of the relavant pages from Apr 2004 Hobby Japan, I dont have that one and Im sure that there are plenty here you dont eaither. This website already has the scans of the apr 2004 issue, and scans from many other issues as well.http://www.macrossworld.com/macross/magazi...an2001-2003.htm
big F Posted November 11, 2007 Posted November 11, 2007 This website already has the scans of the apr 2004 issue, and scans from many other issues as well.http://www.macrossworld.com/macross/magazi...an2001-2003.htm Oh a few more have been added since I last looked. Still need some more modern ones though.
PetarB Posted November 11, 2007 Posted November 11, 2007 Simply beatiful work. Your extra effort really, really shows!
MechTech Posted November 11, 2007 Posted November 11, 2007 Awesome work! The steel shafts/photo etch are a great touch! A lot of fighters (at least US/UK Air Force) fighters are pretty clean like that. - MT
mojacko Posted November 17, 2007 Posted November 17, 2007 its worth the wait.....clean and mean!! great work!!!
Jeremy007 Posted November 25, 2007 Posted November 25, 2007 how did you get the panel lining so perfect? did you use a marker or a paint brush and let the thin paint run down the lines and then use thinner to clean up the excess? thanks, any info would really help as i am currently building the vf-0s
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now