Jump to content

All Activity

This stream auto-updates

  1. Past hour
  2. Jello
    So I just picked up the BluRay while I was in Japan this past winter break from Mandarake. I want to be able to watch this from my computer (while I work), but I don't have the necessary gear to rip it. So this might be a weird request but would someone where be able to share their 4k rip with me or point me to a place where I can download it?
  3. Today
  4. M'Kyuun
    Yes. No. I'll agree to disagree. The Feios looks like a flying pancake. Moreover, it has smooth, unbroken lines whereas the Xiwanshe design is broken up, with a great deal of obvious layering effects across its surfaces. It would be, by virtue of design, very prone to drag. The Xiwanshe is a good sci-fi design, but unlike Kawamori's generally more grounded valks, impractical. Potentially, although I'm thinking Kawamori would smooth out all the rough edges and layering effects. I like the design, I'm just looking at it from a view to aerodynamics. However, anything will fly with enough thrust behind it. regarding the DNA kit for Alpha Trion, I like the look of those wings in flight mode, and they make for a nice cape in bot. I'm not going to spend the money, but I do think this meets the criteria for a proper upgrade, as it enhances any number of aspects of the figure, which is already pretty good, IMHO. Oh my, yes! I'm waiting on my copy to arrive, but FINALLY, a complete set of Omnibots! As much as I have to grudgingly agree, Downshift being the only one I owned as a kid and still my favorite, I think the poorly named Camshaft takes the prize as their best overall design amongst the three. XTB needlessly complicated the leg design on Overdrive, making it a tentative and frustrating process to transform, IMHO. YMMV, of course. I feel there's something off about Downshift, but I can't quite pinpoint it. I like it, but I have that feeling. Ironically, Camshaft was always my least favorite of the three, but I think XTB did their best work with this guy. The bot proportions are really good, and his car mode, as do all three, looks amazing. Camshaft's G1 toy arguably had the worst weaponized mode, and that follows with this fig despite XTB's attempts to update it and clean it up a bit. IMO, anyway. Still, it does the gimmick as it should. I'll be happy to have him in hand to place alongside his two partners. Now Takara, and Hasbro by extension, needs to crank out some Legacy Omnibots. We've waited far too long for official updates.
  5. Big s
    The popcorn alone will set you back more than a few dollars. Although if it ends up looking that cool, it might make a cool stand in for action figures if you can wash off the greezy butter
  6. Big s
    I think that unfortunately the first trailer kinda ruined my interest in this movie. Not that I really had much after her appearance in Superman
  7. guyxxed
    I'm with you on excessive bulk. I really like the super packs and how they enhance the shape of the plane and battroid while still working with the overall style of the designs. I've never like the armor packs specifically because they tend to feel like they're trying to turn the plane into a different mech. While that's a valid thing to do in setting (and, honestly, really IS what they are for), aesthetically it's never appealed to me, though I like the concept of modular add ons for capability enhancements. It's why I both love the mission containers on the 31 and hate the wasted opportunity they represent. 😉 You're not wrong. That head is really the prototype for the 25S and if you squint at it, that's the shape it was meant to be. Like I said above, when I first saw it, it connected in my head to that 'underbite' feature on the F head and my brain spun off from there. Having looked at what I came up with in 3D now, I think I'm backing off to more of a "Briareos from Appleseed" shape with mandibles than the V-shovel I came up with, though I think there are ways to make it work. We'll see where it goes as i play with it. This is very true, and something I love about the man. He never really gives up on an idea, just looks for a different place to use it. Something to take inspriration from in my engineering life, I think. 😉
  8. rsvictor1976
    I wish DNA Design would make upgrade kits for DX Valkyries. I've tried 3D printed parts before and while its nice to have the option, the quality of the plastic isn't the same as the injection molding like the ones DNA Design uses.
  9. rsvictor1976
    I ended up contacting ThreeZero and opening a warranty request for the correct red color neck for the Miriya Veritech. They said they would send one but it would take a while to mail it due to the tariff situation.
  10. wm cheng
    Wow! That's gorgeous!!!
  11. jenius

    DX Chogokin VF-17S

    jenius replied to GGemini's topic in Toys

    We need someone to 3d print enhancement parts for the 1/65 DX.
  12. Hikaru Ichijo SL
    Frieren was great again today.
  13. Seto Kaiba
    From the design, it looks like it became the BGP-02 beam gunpod used by the YF-27. Kawamori almost never lets anything go to waste.
  14. Shawn
    This would look really cool on my shelf at night for sale! Just $430 https://auctions.yahoo.co.jp/jp/auction/u1216907753 "The light spots on the hull are flashing, but not flashing brightly, just occasionally for a moment. There are about six different patterns with different timing that make it seem like it slowly disappears."
  15. sh9000
    Goes up for preorder at Target on 3/3.
  16. Arhur_skull001
    Arhur_skull001 changed their profile photo
  17. Arhur_skull001 started following DX Chogokin VF-17S
  18. Arhur_skull001
    Since it’s a direct copy of the VF-171, I prefer my old Yamato 1/60 VF-17s
  19. Papa Rat
    Not sure if at the time this kit was produced if it was difficult to cast certain pieces but this IMS Terror Mirage kit has so many smaller “granular” parts to make a simple part it feels overly complicated. Not a complaint. Just an observation as I move through the sub assembly.
  20. Gendo Koun
    Do you by any chance have a picture of this Famimart VF-25 in Gerwalk or Battroid mode? This is so hillarious 🤣
  21. sh9000
  22. PointBlankSniper
    While I'm no fan of excessive bulk and odd dangling shapes, for an aircraft, and a potential toy, I think it's a pretty cool looking mech. If only it wasn't supposed to transform lol. I have a love-hate relationship with armor packs in general. I love the gimmicks, and the silhouette changes on existing parts, but I don't like the oversized brick nature and excessive additional overhanging components of them. Most of those parts look like they bring reasonable specialized function to the base battroid. Even the absurdness of the pronged gun and big arm blade, could be excused if there was some plot relevant use. I just don't like the spatula fin funnel things and their bulky drum mounts, which IMO don't look good on gundam or any other mecha, and can't really be explained as an attachement over the aircraft's wings. The fighter sketch looks close to the final armored design, with an extra giant gun. The gun itself is too alien for my tastes, but I'm sad that the idea of another gunpod for the armored pack was lost. As for the head, it looks like you interpreted the lower jaw as a V. Will be interesting to see how it turns out because I see the sketch differently. My take is that it's either vertical cheeks only tapering on the x axis towards the front, or even ^ shaped where the lense parts just scallop out the peak. The lense would be smaller and temple/cheeks much wider, as well as the glass you have yet to or not planning to model bubble out and overhang the jaw. Not sure if that make's sense in text lol
  23. Old_Nash_II
  24. varitechs
    Jenius used the acrylic display stand but with the weight, it's complicated.. Perhaps printed in 3D
  25. derex3592
    I'd buy that for a dollar!!!! 😂
  26. Thom
    Probably cost an arm and a leg, but that looks sooo cool!
  27. guyxxed
    I agree, it's way too skinny still, and I overemphasized the 'shovel' on the jaw (I liked the idea of a theme of sorts with the big underbite feature on both the A and F heads, but leaned into it a bit too much here). Some updates will be coming. And, yes, here is the full page, along with the fighter configuration. Honestly, the armor is pretty ridiculous and I'm glad they moved away from this concept. Seems the crazy Gundam-esque armor in the Delta movies actually had their origins here in Frontier. Hope to see more restraint and practicality in future designs, but maybe that's just me.
  28. Scyla
    I ordered the 1/12 scale Contra figure from HLJ. They were originally planned to be released in August 2025 but have been pushed pack every month since then. Is it normal that Hiya Toys are being delayed for that long? It seems like they are using the factory where the Mafex toys are being produced.
  29. sh9000
    New Changeables.
  1. Load more activity
×
×
  • Create New...