cool8or Posted January 23, 2015 Share Posted January 23, 2015 (edited) Hi guys! This was my last project finished in 2014. Nupetiet-Vergnitzs is a 1/8000 resin kit that you can get from Scale Solutions. For this kit I experimented with Molotow Paints, wich are spray cans used for Graffittis. I realy like these paints, It will be my option for base color on large kits. But, in the other hand, if I would have used acrylic paints, I would have been able to make bigger chips. Anyway, I'm happy for have discovered these paints. SDF-1 is the 80's Arii version, a little hard to find these days, but not impossible. I hope do you like it!! Edited March 9, 2015 by cool8or Quote Link to comment Share on other sites More sharing options...
DarkArchon3000 Posted January 23, 2015 Share Posted January 23, 2015 (edited) Absolutely Gorgeous! I think I saw this as a contest winner on another site. Did you modify the front canons? Edited January 23, 2015 by DarkArchon3000 Quote Link to comment Share on other sites More sharing options...
Mommar Posted January 23, 2015 Share Posted January 23, 2015 That is awesome. Quote Link to comment Share on other sites More sharing options...
MechTech Posted January 23, 2015 Share Posted January 23, 2015 (edited) That's an AWESOME build! The capital ship looks great, but extra kudos for a well done SDF-1! You should put it against a ruler so everyone can see how small it is. Nice photography too!-MT My mistake, I confused the 1/8000 kit with the smaller kits, still looks grest though! Edited January 23, 2015 by MechTech Quote Link to comment Share on other sites More sharing options...
vsim Posted January 23, 2015 Share Posted January 23, 2015 Nice! Love it. Quote Link to comment Share on other sites More sharing options...
kyekye Posted January 23, 2015 Share Posted January 23, 2015 Awesome!! Looks great together! Quote Link to comment Share on other sites More sharing options...
Mechleader Posted January 23, 2015 Share Posted January 23, 2015 NICE!!!! Great job!!! Quote Link to comment Share on other sites More sharing options...
Boss Posted January 24, 2015 Share Posted January 24, 2015 That's a beautiful sight right there...absolutely wonderful. Quote Link to comment Share on other sites More sharing options...
cool8or Posted January 24, 2015 Author Share Posted January 24, 2015 Absolutely Gorgeous! I think I saw this as a contest winner on another site. Did you modify the front canons? yeah, I won a contest in the Chilean site solomaquetas.com. The original cannons were far diferent one from another, so I adapt the lasers of a VF-1J head from Hasegawa. Quote Link to comment Share on other sites More sharing options...
derex3592 Posted January 24, 2015 Share Posted January 24, 2015 Great job as always!!! Quote Link to comment Share on other sites More sharing options...
milhouse Posted January 25, 2015 Share Posted January 25, 2015 So beautiful! Both ships! Quote Link to comment Share on other sites More sharing options...
Noyhauser Posted January 25, 2015 Share Posted January 25, 2015 Very cool and very well done! The SDF is no slouch whatsoever. Quote Link to comment Share on other sites More sharing options...
Zinjo Posted January 29, 2015 Share Posted January 29, 2015 Very nice, not many can build the Zentradi ships with a sense of scale. I only wish you would have uploaded higher resolution images so we can appreciate the work in more detail. Quote Link to comment Share on other sites More sharing options...
Thom Posted January 30, 2015 Share Posted January 30, 2015 Great work! Love that ship and you've done it justice. Quote Link to comment Share on other sites More sharing options...
Mommar Posted February 4, 2015 Share Posted February 4, 2015 This just gave me an idea, Arcadia can make a $20,000 1/3000 Nupetiet-Vergnitzs to go with their SDF-1 as a Wonderfest exclusivejust like the life sized Gunpod from last year. Quote Link to comment Share on other sites More sharing options...
AcroRay Posted February 6, 2015 Share Posted February 6, 2015 Good gosh, both of those are BEAUTIFUL! I don't know which one floors me the most - that Kits Power piece, or how beautifully you painted the Arii kit! Quote Link to comment Share on other sites More sharing options...
Berttt Posted February 10, 2015 Share Posted February 10, 2015 I don't post to these forums anymore but I'll break silence over this one. Congratulations... Quote Link to comment Share on other sites More sharing options...
derex3592 Posted February 10, 2015 Share Posted February 10, 2015 I thought that was the same one! I bought mine directly from Wayne down in Australia a few years back. Good guy. Quote Link to comment Share on other sites More sharing options...
cool8or Posted February 10, 2015 Author Share Posted February 10, 2015 Sorry about that... I were looking for this kit in standard configuration for over a year but this was the only one that I could find. That's why I bought this one and made the extra work of undoing the firing gun configuration, to going back to standard configuration. So If you know where we can buy the original, please post the link. Quote Link to comment Share on other sites More sharing options...
derex3592 Posted February 10, 2015 Share Posted February 10, 2015 wait.....Wayne's kit as far as I know could not be built as the never seen in the anime "firing position", so this must be another kit someone made at some point??? Quote Link to comment Share on other sites More sharing options...
jardann Posted February 10, 2015 Share Posted February 10, 2015 I've got Wayne's kit at home, but I don't remember if it has the firing mode option or not. I'm pretty sure (the seller of this kit) does have a bad reputation as a big time recaster though. Anyone feel free to correct me on that if you have evidence to the contrary. Wayne is a good guy and a talented artist, but I think he can be a bit of a hothead and jump to conclusions very quickly as well. That being said, that sure looks like his kit and I've never heard of another one being made available from another person or company. Unfortunately I believe Wayne is all but out of the kit creation business due to many of his designs being hijacked by recasters and then sold at lower prices and lower quality. This means that his former kits are no longer available from him, and that may actually (inadvertantly) help promote the sales from those recasters because there is no other source to buy from. I do feel it is important to avoid recast kits as much as possible and to help identify recasters and their inferior products. However, I know it can be confusing and sometimes difficult to know if you are buying from a recaster. I'm pretty sure I have purchased some kits unknowingly that turned out to be recasts. Especially as there was a time when I wasn't aware of the practice and I just grabbed up any interesting anime model subjects whenever I had the chance. I wouldn't purchase those any more, but I'm sure not going to throw out the kits I do have now that I've spent money on them. On the other tentacle, cool8or is a friendly guy as well and a great contributor to this forum. He is a quality model builder and while unfortunate, I would give him the benefit of the doubt as to whether he knew the provenance of that kit and whether or not (the seller of this kit) is a recaster or not. He just finally found a kit that he had heard of and that he wanted, and now he has produced and beautiful replica. Maybe the mention of the source that he bought the kit from should be removed from this topic in order to not promote any further business for them. If that is done, I don't see any reason to criticize cool8or unless he were to begin trying to promote a certain recaster or the practice of recasting. Which he has not shown any sign of doing. Quote Link to comment Share on other sites More sharing options...
jardann Posted February 10, 2015 Share Posted February 10, 2015 Forget trying to change my mind about the recaster mentioned in this thread. Unless I hear from some original kit creators here that they are selling through that retailer, then I am 100% sure that they are a recaster. Shameless and brazen recasters who should be avoided. In fact I would get behind an effort to actively spread the word about them. While I would still give cool8or the benefit of the doubt that he bought this kit in good faith, I don't see how you could be an active member of the modelling community here and not be suspicious when you take a look at their website. Quote Link to comment Share on other sites More sharing options...
ScaleSolutions Posted March 7, 2015 Share Posted March 7, 2015 Its a recast, around in circles we go, Kit Power AKA Kenny Lam sells nothing but recasts, he has started adding some bits like the main gun firing, but the hole top and bottom of the ship are recast from my kit. Link to were it was talked about on these forums before. http://www.macrossworld.com/mwf/index.php?showtopic=35719 Quote Link to comment Share on other sites More sharing options...
cool8or Posted March 7, 2015 Author Share Posted March 7, 2015 I remember that topic now, but I stooped to watch it when we were talking about the pictures. I'm sorry about this, but I looked this kit for a couple years and this in the only one that I found available. I have over 30 garage kits and no more than 5 are recast. I just bought these recasts because the original was unavailable for years. But, if I was wrong and your kit it's actually available, please put the link, this way I put it in the first post and other people that see this topic will know how to get the original. Sorry again. Quote Link to comment Share on other sites More sharing options...
ScaleSolutions Posted March 7, 2015 Share Posted March 7, 2015 Kit has been constantly available from me up until the start of this year. If your really sorry your more then welcome to send me AUD$175 or destroy the recast you have. Wayne Pugh Scale Solutions Quote Link to comment Share on other sites More sharing options...
electric indigo Posted March 9, 2015 Share Posted March 9, 2015 Kit has been constantly available from me up until the start of this year. If your really sorry your more then welcome to send me AUD$175 or destroy the recast you have. Wayne Pugh Scale Solutions Maybe you should take some time to consider who's making a profit from somebody else's creative effort in the first place. Quote Link to comment Share on other sites More sharing options...
ScaleSolutions Posted March 9, 2015 Share Posted March 9, 2015 My be you should go get an understanding of what makes a creative effort a transformative work and who can make a profit of it. Wayne Pugh Scale Solutions Quote Link to comment Share on other sites More sharing options...
cool8or Posted March 9, 2015 Author Share Posted March 9, 2015 (edited) Hasegawa, Bandai, Wave, Arcadia and all those Companies that pays the fees for using the Designs owned by Big West. I respect your work but you can't blame buyers if you don't have the product available. Nobody pays more for a recast if the original is available for less. I say this because I paid more than AU$175 for KP kit. Even now, your kit is not available in your web page: http://stores.ebay.com.au/Scale-Solutions-store/Resin-model-kits-/_i.html?_fsub=2316375013&_sid=10487333&_trksid=p4634.c0.m322 Anyway, If you want my money, you can have a lot more than AU$175: Just make more Zentradi cruisers and complete the 1/8000 series. I will very happy making bussiness with you. You can offer them first here in MW and you can be sure that your work will not go to a recaster. Edited March 9, 2015 by cool8or Quote Link to comment Share on other sites More sharing options...
Zinjo Posted March 9, 2015 Share Posted March 9, 2015 My be you should go get an understanding of what makes a creative effort a transformative work and who can make a profit of it. Wayne Pugh Scale Solutions Have you considered doing what BigWest does (how well it works is debatable), in that all official products have a permanent metalic or holographic seal, letting buyers know the product is an officially licensed product. I wonder if putting a "Scale Solutions" seal would be effective in identifying your products to purchasing fans? Quote Link to comment Share on other sites More sharing options...
ScaleSolutions Posted March 10, 2015 Share Posted March 10, 2015 The recaster in question was sticking it in a box with a copy of my instructions with my name all over it, and sell it as a recast of a scale solutions kit, he dose the same with big name manufacturers. And here is the problem cool8or I have more patterns for 1/8000 kits that are never going to be put out as kits, recasters are recasters because they don't have the skill to make patterns, so as people like me pull out of making kits less new kits for you. Quote Link to comment Share on other sites More sharing options...
EXO Posted March 10, 2015 Share Posted March 10, 2015 Ok dude. I don't think Cool8or is the sole reason of your woes. There's already a thread that complains about the perpetrator that was bumped up today. Take it to that thread. Quote Link to comment Share on other sites More sharing options...
Berttt Posted March 10, 2015 Share Posted March 10, 2015 Oh great. The all powerful Exo! Quote Link to comment Share on other sites More sharing options...
neptunesurvey Posted March 11, 2015 Share Posted March 11, 2015 That's why I bought this one and made the extra work of undoing the firing gun configuration, to going back to standard configuration. Very nice job especially in switching it back into cruiser mode. I have both kits and thought about trying to make the KP kit modular, but I could not get it to look right. Did you use putty or styrene to fill the void between both halves? Quote Link to comment Share on other sites More sharing options...
TheLoneWolf Posted March 11, 2015 Share Posted March 11, 2015 Kit has been constantly available from me up until the start of this year. If your really sorry your more then welcome to send me AUD$175 or destroy the recast you have. Wayne Pugh Scale Solutions Did Big West ever ask you to pay them licensing and royalty fees for merchandising their intellectual property, the Nupetiet-Vergnitz? Did Big West ever ask you to destroy the resin kits that you produced? I didn't think so. But you're asking cool8or to do that for you? That's hypocritical. Quote Link to comment Share on other sites More sharing options...
Mechamaniac Posted March 12, 2015 Share Posted March 12, 2015 Agreed. This is the same argument that drove me away from the RPF. It usually goes something like this. Fan makes a model, unlicensed. Fan makes a kit from his model, unlicensed. Fan sells garage kit, unauthorized. Garage kit gets bought and recast. Fan finds out and spends an inordinate amount of time telling the world that someone stole his artwork or his IP. Bottom line - Unless Big West authorized you to make and sell that kit, you're no better than the recaster who stole your work. I realize that this is a part of fandom. Companies may never get around to making that model of X that we all so desire. So, we make it ourselves, and we decide to make copies of it available to other fans. Where the unbridled and (quite frankly) unforgivable hypocrisy comes in is when people start screaming that they've been wronged when someone steals the thing they were never authorized to sell in the first place. You may have made a beautiful model, but the minute you dropped it in silicone and started selling casts of it, you violated the IP rights of the company that owns the original designs. It's really just that simple, so get over yourself. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.