wolfx Posted May 11, 2006 Share Posted May 11, 2006 Here are some pictures comparing the Zero with the 1/60 VF-1. Damn, that is one big bird... 398569[/snapback] I know kinda makes all of those people ruinning around saying this 1/60 is not worth 160$ look foolish 398585[/snapback] Yep. Just imagining how big it 'll be if it was actual 1/48 is mind boggling. Quote Link to comment Share on other sites More sharing options...
sidearmsalpha Posted May 11, 2006 Share Posted May 11, 2006 Wow! Looking at those comparison shots, I didn't realize til now how much bigger the VF-0S is! I guess using nuclear reactors to power the VF-1 and those few more years of R&D were able to shrink down the technology used in the VF-0 quite a bit. I received a VF-0S from an HK seller on eBay, and other than one of the little yellow pointed things on the back wings being slightly bent (easy fix) and the skull on the pilot's head being a little off, it doesn't have any issues. I really like it alot. The improvements really add to its beauty. It would be nice to see the VF-1 get similar improvements sometime later. Quote Link to comment Share on other sites More sharing options...
eugimon Posted May 11, 2006 Share Posted May 11, 2006 yeah, it's almost ridiculous how much bigger the VF-0 is... though, seeing those comparison shots almost makes me wish I had kept my 1/60's.... but when I think of that ridiculous leg latch design, I'm glad I didn't. Quote Link to comment Share on other sites More sharing options...
eriku Posted May 11, 2006 Share Posted May 11, 2006 Looks like BBTS finally got their shipment since my card was just charged and they sent a confirmation email. I'll probably never pick up a 1/48 again after landing this bird. Quote Link to comment Share on other sites More sharing options...
Aegis! Posted May 11, 2006 Share Posted May 11, 2006 It seems people are finally realizing a 1/48 VF-0 would be an insane idea afterall. Not only it would cost a pretty penny , it would be way too big for a display piece in anyone´s display cabinet , let alone the fact that production costs would possibly force Yamato to do a limited run with probably not many variants... 1/60 was the best option IMO. Just look at this toy and you´ll know I´m right. Let´s hope they make a 0D and a SV-51 ( or an OCTOS...yeah right ). OT: I´ve had this signature for almost over a year and now that the toy is out and its size is now a fact everyone can see I think I can finally change it. Quote Link to comment Share on other sites More sharing options...
Ignacio Ocamica Posted May 11, 2006 Share Posted May 11, 2006 Some gerwalk pictures... Quote Link to comment Share on other sites More sharing options...
Ignacio Ocamica Posted May 11, 2006 Share Posted May 11, 2006 (edited) More gerwalk pics... Typo Edited May 11, 2006 by Ignacio Ocamica Quote Link to comment Share on other sites More sharing options...
JELEINEN Posted May 11, 2006 Share Posted May 11, 2006 Can I get some suggestions as to good places for someone in the US to order from? It's been a while since I've bought a toy like this (not since when the 1/48s first came out), so I'm not up to date on what's out there. Quote Link to comment Share on other sites More sharing options...
eriku Posted May 11, 2006 Share Posted May 11, 2006 (edited) Can I get some suggestions as to good places for someone in the US to order from? It's been a while since I've bought a toy like this (not since when the 1/48s first came out), so I'm not up to date on what's out there. 398676[/snapback] Big Bad Toy Store is one of the best. They might even still have some available after filling pre-orders since they supposedly ordered a large amount of them. The downside is they are asking $184 for the thing before shipping, which is high. They're a reliable store though, and I always get my stuff from them in a day or two (it helps I live very close to their warehouse). I didn't like paying that much for the Zero, but the trust and confidence I have in BBTS is worth it I guess. Edited May 11, 2006 by eriku Quote Link to comment Share on other sites More sharing options...
Ignacio Ocamica Posted May 11, 2006 Share Posted May 11, 2006 More comparison shots with a 1/60 Super FP CF Quote Link to comment Share on other sites More sharing options...
wolfx Posted May 11, 2006 Share Posted May 11, 2006 Some gerwalk pictures... 398659[/snapback] Dude...you need to mop your floor. Quote Link to comment Share on other sites More sharing options...
aaajin Posted May 11, 2006 Share Posted May 11, 2006 (edited) Can I get some suggestions as to good places for someone in the US to order from? It's been a while since I've bought a toy like this (not since when the 1/48s first came out), so I'm not up to date on what's out there. 398676[/snapback] Big Bad Toy Store is one of the best. They might even still have some available after filling pre-orders since they supposedly ordered a large amount of them. The downside is they are asking $184 for the thing before shipping, which is high. They're a reliable store though, and I always get my stuff from them in a day or two (it helps I live very close to their warehouse). I didn't like paying that much for the Zero, but the trust and confidence I have in BBTS is worth it I guess. 398685[/snapback] why BBTS when you can get them far cheaper on ebay & from some TRUSTED sellers here ?. aaajin Edited May 11, 2006 by aaajin Quote Link to comment Share on other sites More sharing options...
Ignacio Ocamica Posted May 11, 2006 Share Posted May 11, 2006 Some gerwalk pictures... 398659[/snapback] Dude...you need to mop your floor. 398698[/snapback] HAHAHA It's the side of the grill in my backyard. I put coal bags or wood to make the fire Quote Link to comment Share on other sites More sharing options...
Shacky Posted May 11, 2006 Share Posted May 11, 2006 Question: How well have these been selling? Answer: I've been in Japan for business this week (unfortunately no time to visit any MWers this time) and found a store with a new stock of Yamato toys. They had 4 Stealth, 2 Super Stealth, and about 20 VF-0S on Monday night. By Thursday night, they had 3 Stealth, 1 Super Stealth (with a big dent in the box) and 4 VF-0S. I bought mine from them and don't expect the rest to last the weekend. They also have some stands and it looks like the black stands are selling better than the silver ones. Quote Link to comment Share on other sites More sharing options...
eugimon Posted May 12, 2006 Share Posted May 12, 2006 nice, I got my 'just shipped" email today so I should have my babies tomorrow... reason enough to go to work I guess. Quote Link to comment Share on other sites More sharing options...
Blaze_00 Posted May 12, 2006 Share Posted May 12, 2006 Alittle off topic but, how did you get the FP on the CF? (mine doesn't have the booster holes..) More comparison shots with a 1/60 Super FP CF 398688[/snapback] Quote Link to comment Share on other sites More sharing options...
agr33 Posted May 12, 2006 Share Posted May 12, 2006 so, I went to check the mail today and i almost kissed my mail man,!!!!! walking towards me was a man carrying a rather large box from twinmoons!!! just got my VF-0S! this thing is absolutely amazing!!! the detail, the size the amzing opportunity to weather this bad boy. also, i am so glad that i am one of the few who found no problems with them I have inspected all four of them and they are all great absolutely flaws. anyway here are my pics Quote Link to comment Share on other sites More sharing options...
1994cobra Posted May 12, 2006 Share Posted May 12, 2006 Thanks for all the pics guys! I visit here every day, checking them all out.. Im expecting to recieve my ZERO in the next few days!! Quote Link to comment Share on other sites More sharing options...
Golden Arms Posted May 12, 2006 Share Posted May 12, 2006 so, I went to check the mail today and i almost kissed my mail man,!!!!! walking towards me was a man carrying a rather large box from twinmoons!!! just got my VF-0S! this thing is absolutely amazing!!! the detail, the size the amzing opportunity to weather this bad boy. also, i am so glad that i am one of the few who found no problems with them I have inspected all four of them and they are all great absolutely flaws. I see that you've taken yours apart somewhat to panel line it. Do you think it's easy to remove the backpack? The reason I ask is because I'm going to have to replace the grey panel that attaches the flap to the backpack, and I wanted to know if I should request the entire backpack or just the grey plate. Quote Link to comment Share on other sites More sharing options...
Ignacio Ocamica Posted May 12, 2006 Share Posted May 12, 2006 Alittle off topic but, how did you get the FP on the CF? (mine doesn't have the booster holes..)More comparison shots with a 1/60 Super FP CF 398688[/snapback] 398741[/snapback] I made the two rectangular holes in the backpack on each side I measured the holes from a fast pack equipped valk and used a dremel to cut the CF backpack in the exact same place. If you do this make the slots a little bit smaller so the fast packs fit tightly. Quote Link to comment Share on other sites More sharing options...
kyatsu Posted May 12, 2006 Share Posted May 12, 2006 hey agr33, if i may ask, how long did it take for you to apply all the stickers and panel outline? it looks like it is quite a project to do that. also, what did you use for panel outlining? i have to say you did an outstanding job. well done, kyatsu Quote Link to comment Share on other sites More sharing options...
agr33 Posted May 12, 2006 Share Posted May 12, 2006 acutally guys i didn't take it apart at all. i used the same techiuqe i use in my model kits ... all together it took about 30 min. here;s the trick guys. take a small cup or container. add water, some palmolive(dish washing soap) and and black acrylic paint. ( must be acrylic!!!!!) mix it all together until you get a type of sluggy mixture. then with an ordinary paint brush apply everywhere there is a panel line ect. let it dry for about ten minutes then just rub off. if it gets a little hard to take off just apply a little water to a rag and it will come right off. this techniuqe is full prof if you mess up no prob just wipe off and start over. note it is supossed to look really messy but it will come out beautiful and as a side effect it will give you that great weathered look and make you valk look less like a toy! Quote Link to comment Share on other sites More sharing options...
Extra Large Mumma Posted May 12, 2006 Share Posted May 12, 2006 Go, eugimon, go! I now have a VF-0 in my hand. I have not transformed it yet. For now I just leave it at the factory-default fighter mode , with the Macross sail logo applied to the sides of the cockpit. The goods: There is no shipping mishaps on this dude. The tail fins are good. The Jolly Roger logos on the tail fins are straight. The paint is perfect everywhere. The pilot is nicely sculpted and painted. Does anybody know how to safely remove the intake covers? I'm able to remove one of them by pressing on the bottom part (in the manual). The other one just won't budge. I still want the valk have its glory within the first day out of the box. Quote Link to comment Share on other sites More sharing options...
ghostryder Posted May 12, 2006 Share Posted May 12, 2006 I'm gonna cry if I have to go another week waiting for this bird to land Quote Link to comment Share on other sites More sharing options...
kyatsu Posted May 12, 2006 Share Posted May 12, 2006 when you said ordinary brush, is it like very thin brush? and how long did it take to apply the stickers? kyatsu then with an ordinary paint brush apply everywhere there is a panel line ect. Quote Link to comment Share on other sites More sharing options...
agr33 Posted May 12, 2006 Share Posted May 12, 2006 well it will go alot faster with a wider brush , but i always use a mid -size brush, stikers take no time alt all. you would be finised with everything in under an hour, Quote Link to comment Share on other sites More sharing options...
Dangaioh Posted May 12, 2006 Share Posted May 12, 2006 I got mine today at work, opened the box, and transformed it... I am so happy. However (and I don't feel like reading 80 pages, just to find my answer), has anyone thought about using 1/48 missile sets onto this? Those 4 slits on the sides (2 on left and right) of the back where the tail boosters and tail hook is located, would this mean that a fp/sp might be in the works? Quote Link to comment Share on other sites More sharing options...
kyatsu Posted May 12, 2006 Share Posted May 12, 2006 thank you agr33. i will try doing it when i have the guts. i am so chicken about this. but maybe i will have the courage to do it now. kyatsu well it will go alot faster with a wider brush , but i always use a mid -size brush, stikers take no time alt all. you would be finised with everything in under an hour, Quote Link to comment Share on other sites More sharing options...
eriku Posted May 12, 2006 Share Posted May 12, 2006 Can I get some suggestions as to good places for someone in the US to order from? It's been a while since I've bought a toy like this (not since when the 1/48s first came out), so I'm not up to date on what's out there. 398676[/snapback] Big Bad Toy Store is one of the best. They might even still have some available after filling pre-orders since they supposedly ordered a large amount of them. The downside is they are asking $184 for the thing before shipping, which is high. They're a reliable store though, and I always get my stuff from them in a day or two (it helps I live very close to their warehouse). I didn't like paying that much for the Zero, but the trust and confidence I have in BBTS is worth it I guess. 398685[/snapback] why BBTS when you can get them far cheaper on ebay & from some TRUSTED sellers here ?. aaajin 398713[/snapback] I would never make a transaction for over $100 on Ebay, I'm not aware of any forum members that currently have some available, and I TRUST BBTS. Is that good enough? Quote Link to comment Share on other sites More sharing options...
holytoledo69 Posted May 12, 2006 Share Posted May 12, 2006 I got mine today at work, opened the box, and transformed it... I am so happy. However (and I don't feel like reading 80 pages, just to find my answer), has anyone thought about using 1/48 missile sets onto this? Those 4 slits on the sides (2 on left and right) of the back where the tail boosters and tail hook is located, would this mean that a fp/sp might be in the works? 398772[/snapback] The missles from the 1/48 fit fine on the VF-0. The fast packs and super parts I havent tried. I doubt it'll hold though being how heavy those boosters are AND that there's no actual locking mechanism on the VF-0's backpack, so it'll just flop around. Quote Link to comment Share on other sites More sharing options...
Aegis! Posted May 12, 2006 Share Posted May 12, 2006 So when are we going to see customs of this guy ? Anyone with the courage to do a hikaru or max custom ? Quote Link to comment Share on other sites More sharing options...
Graham Posted May 12, 2006 Author Share Posted May 12, 2006 Those 4 slits on the sides (2 on left and right) of the back where the tail boosters and tail hook is located, would this mean that a fp/sp might be in the works? 398772[/snapback] The 4 slits on the VF-0S's backback are a completely different size and shape compared to those on the 1/48, so the 1/48 FAST Packs will not fit. Not to mention that they would be completely out of scale anyway. Graham Quote Link to comment Share on other sites More sharing options...
aaajin Posted May 12, 2006 Share Posted May 12, 2006 I would never make a transaction for over $100 on Ebay, I'm not aware of any forum members that currently have some available, and I TRUST BBTS. Is that good enough? 398792[/snapback] no j/k Quote Link to comment Share on other sites More sharing options...
Shin Densetsu Kai 7.0 Posted May 12, 2006 Share Posted May 12, 2006 It seems people are finally realizing a 1/48 VF-0 would be an insane idea afterall. Not only it would cost a pretty penny , it would be way too big for a display piece in anyone´s display cabinet , let alone the fact that production costs would possibly force Yamato to do a limited run with probably not many variants...1/60 was the best option IMO. Just look at this toy and you´ll know I´m right. Let´s hope they make a 0D and a SV-51 ( or an OCTOS...yeah right ). OT: I´ve had this signature for almost over a year and now that the toy is out and its size is now a fact everyone can see I think I can finally change it. 398652[/snapback] Nope. MOST of you love this thing@1/60, and I'm not lying, I do myself. But I do not think 1/48 is insane at all. Remember, this is the same company that intended to create a 1/60 monster a couple years back. Sure it never came out but still it would have been awesome if they did. Too big for display cases?? I collect 1/18 scale planes, so in my case, no. I think it would have been AWESOME in 1/48, it would have given yamato more space to cram in some painstaking detail that they are known for. It would have costed much yes but hell to me it would have appealed more. I realize I am in the minority and there are just a few of us who wanted it 1/48, with that said the 1/60 VF-0 does not dissapoint me, I just think it'd be cooler if we had a giant 1/48 scaled VF-0. Besides most of you here have more 1/48 VF-1's and less 1/60. With that said, I will gladly buy this toy. Don't get me wrong I don't hate that its 1/60, I just wish it was 1/48(YES I REALIZE IT WOULD PROBABLY BE 2 FEET LONG AND TALL AND REMEMBER I COLLECT 1/18 SCALE TOYS SO TRUST ME THIS WOULDN'T BE ALL THAT BIG FOR ME). *Btw that ink line technique brought up earlier with the palm olive, GENIUS!! I'm definitely trying it out!* Quote Link to comment Share on other sites More sharing options...
wolfx Posted May 12, 2006 Share Posted May 12, 2006 acutally guys i didn't take it apart at all. i used the same techiuqe i use in my model kits ... all together it took about 30 min. here;s the trick guys. take a small cup or container. add water, some palmolive(dish washing soap) and and black acrylic paint. ( must be acrylic!!!!!) mix it all together until you get a type of sluggy mixture. Thanks for the tip! What are the ratios for the paint/water/soap ? And me being a total noob, what's the soap for? Less water tension so it will sink into every crevice of the valk? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.