All Activity

Starscream looks nice, I still rather like that he's his Trijet alt mode and we barely even saw it in the film. Actually I feel like the characters in this film really shine in the Studio Series line. I only ever got B127 and missed out on Prime and Megatron entirely, but that figure was pretty solid compared to his deluxe variant.

I only saw the first episode cause I got my days mixed up. It wasn't bad, I'll watch episode 2 when I get home tomorrow if I'm not stuck trying to get the paperwork to my new car done.

yes, i'm also looking forward to the next part of One Piece

I’m guessing end of month. It’s odd to get the fighter without the weapon set

Mixmaster still hasn't shipped, no idea what's going on with Elita-1, so... I guess this is the last Studio Series review for now? This being Deluxe-class Transformers One Starscream. I compared Starscream with both screen captures and concept art, and overall Starscream's pretty accurate with the usual caveat that Deluxes often lack the budget for all the paint that they need. So, there's a little gunmetal paint on the inside of his forearm, but not his fingers or the mechanical details on the outsides of his forearms. Likewise, there's a little on the top of his foot, but not his toes. His chest vents are painted, but there's none on his lats. There's a hinge on his wing with molded gun-like details that's painted on one piece, but not the part that connects to it. His biceps are missing red stripes. Overall, though, the sculpt is very accurate, a blend of recognizable G1 features and the rounded shoulders, short torsos, and long skinny legs that was TFOne's schtick. I just have two minor nitpicks, and one "this should have been addressed before it went into production" complaint. The nitpicks relate to his backpack. The intakes and the hood are accurate, but they sit back further from his head than they do on the character model. Also, the intakes are just empty, hollow spaces where the CGI model had them filled with gunmetal mechanical details. As for my "should have been addressed" complaint, it's the way the ends of his wings fold. On the toy, they fold over toward the side facing forward. How could this have been fixed? By having them fold to the back of the wing instead, which would have been more movie-accurate. Starscream comes with a few accessories. The most obvious are his null rays. There's also a weird-looking blue gun, and a white bit that doesn't look like a weapon at all. Starscream's head is on a ball joint with a little upward tilt, but plenty of downward and sideways tilt. Shoulders are also ball joints that swivel and move 90 degrees laterally. His biceps swivel, and his elbows bend a little over 90 degrees. No wrist or waist articulation. Hips are ball joints. Due to his backpack he can only move about 75 degrees backward, and the cut of the socket doesn't allow for a full 90 laterally either, but he makes up for it with a forward kick that goes about 120 degrees. His thighs swivel, and his knees bend about 120 degrees as well. His toes can tilt downward due to his transformation, but no upward tilt and in a first for Studio Series-level TFOne figures no ankle pivots. The null rays properly plug into Starscream's shoulders, though I suppose he can hold them in his hands, too. The blue gun and white bit can also be held as weapons, or combined into one larger weapon. You can store the combined weapon in a port on his back; that's actually the proper place for the white bit in alt mode. If you plug it in there you don't actually have to remove it or the null rays to transform him, but the blue gun does require partsforming. Speaking of transformation, for the most part it's pretty straightforward. His backpack opens a little to reveal a spot his head tucks into. His chest swings up, and the nose of his alt mode unfolds from inside. His legs tuck up to where his chest was, and his knees bend so his feet are at the back of the jet. His arms basically just lay there alongside the fuselage under the wings, which rotate on ball joints to help cover over them. Just two issues... first, lining everything up can be a bit of a bear. His heels have to plug all the way into his backpack, or the flaps on his legs won't line up right. If the flaps on his legs don't line up right the forearms won't sit over the hinges on those flaps properly. If the arms don't sit right the wings won't tab in correctly. Once you get it all sorted, though, you'll have to deal with the bane of my existence- the intakes. In theory they untab from the backpack then swing backward on armatures to "thoop" into place over the wings. See, they're held on by those mushroom pegs with the slits in the middle that are, in practice, supposed to squish in to fit through the hole then spread back out to hold the part in place. In reality a simple 5mm peg would have held on tighter, and I've yet to transform Starscream without both intakes popping off. The jet mode doesn't look bad, though. It's the lovechild of the Siege Seeker mold and the Bumblebee Seekers. While the arms are a bit obvious, they do seem to be in the right place. The sculpt is largely accurate with guns in all the right places. Discrepencies between the toy and the CGI largely come down to missing paint, just like bot mode; mostly he's missing a red stripe on the tail and more gunmetal on the cockpit. The cockpit can open; I don't think there's a need for passenger spaces on Cybertronian alt modes, but you need to open the cockpit to transform him, so it's there. As I mentioned earlier, the null rays stay on his shoulders to wind up in a screen-accurate place in alt mode, and the white bit forms the tip of his tail. The blue gun is captured between his shoulder pads as you transform him, but the placement is again screen-accurate. Starscream, much like Prime and Megatron, suffer a bit from being Deluxe-class figures. Now, I get it, most of the bots in the film were pretty similar-sized, and by making them all Deluxes they can get them out faster due to there being more Deluxe slots in a given wave. But if more of his joints were hinges and swivels instead of ball joints, maybe things would line up a bit easier. Maybe he'd have the missing paint apps. Maybe he could have had ankles, or even wrists. Maybe his intakes could have been pinned so they don't keep coming off. Still, Starscream's not bad, and I maintain that Transformers One was probably the best Transformers film since the '86 one, so I'm happy to add him to the collection. Here's hoping Soundwave and Shockwave get toys before they move on from this film.

I received my purchase notice from HLJ this morning for the Deculture Package kits too. Hoping the weapons set will arrive soon. Not sure I'm going to risk shipping these now, as they probably won't make the August 29 tariff deadline (assuming that still goes through).

Just got my first Storm Arena Ken figure in. Despite the gushing reviews these figures are absolutely not Jada killers. Not nearly as advanced or impressive as people are declaring.

Yeah, Bandai and Politics seem to be the big problems these days. Everyone else comes through fine and just getting information on pricing is a bit of a gamble. Beyond that, they have done fairly well other than the moving situation

You’re definitely the Master Tapesmith

I guess the one currently on YJA is a steal....

One part I wish they would update is the small peg connector inside the armor to a larger rectangular one. That piece looks like it could break from stress over time.

Updated info.

Also, this is not an "as ween on tv" releasse. Pretty sure that influences heavily the sales.

Sadly, for me, I have the one VF-1J to commit, and Carpal Tunnel to boot, so I won't be the one to try. I had been in contact with the guy who did that fab DX VF-1S Jetfire custom to hire him to do that 1J reissue up as AXOID, and he was the one to state the joints (some of which are exposed) won't take paint, and will basically ruin the appearance. That is, unless dye was used for those parts, and he had yet to ever try that on a custom. So, here I am.

Hahahaha. Same here

Sorry; I meant your current project. O.o Sometimes my brain vapor locks on me while typing!

And who might get it first?

I think @derex3592 is working on one. I unfortunately don’t have one.

That was just luck: I had the clear soft inner plastic tray from my Koss KTXPRO-1 Titanium Headphones, and the part where the earpieces sat provided me the shapes for both canopies. A little heat for the upper one and a wooden sphere helped refine it further (I prefer "soda bottle plastic" when possible, as it can be ridiculously thin at scale and still look much clearer than styrene. Also: clearcoat doesn't bother it!). No problem! Curious to see how yours comes out! :D

@pengbuzzHell yeah! Love it and I was also curious about why your material of choice is masking tape. I always love a story too and thanks for sharing yours. ♥️

For those who have ordered the Pose+ Legioss (or have been looking into doing so), any rundown of options to purchase from? BBTS is my go-to, even if it takes them a while to get stuff in, because they gave me amazing customer service years back and basically won my business going forward. That said, they look to be about $100+ more than some smaller sellers that I've never heard of before. Does anyone have a sense of, among reputable sellers, where the best deals are, including shipping and anticipated tariffs to the US? Thanks.

omg @pengbuzz - THAT'S AMAZING!!! I can't believe the stuff you create from scratch/masking tape! It's especially nice to find out about your Dad and the background behind your masking tape creations (I've always wondered why you chose that particular medium). It's so much more meaningful. How did you get the clear parts for the canopy to follow such good profiles?

Personally I wouldn't worry too much about the release, even these special web-only releases. Wait for them to show up on the 2nd hand market, get a proxy buyer, and get it from Yahoo Japan. Yes you will pay the 6000-10000 mark up fee, but the stress level or waiting up at 2am refreshing a bunch of web pages is forever gone. Plus they put up the std disclaimer about it being available afterwards. Not saying its the cheapest option for everyone, but it has worked out for me. Plus the shipping always tends to be cheaper, as I bundle this with other items through the proxy.

If it "helps" at all, HLJ has the 1/72 Black Aces discounted 50% to $12.87 USD for their summer sale. That's a crazy good price. 1/72 VF-1J Super/Strike Valkyrie "SVF-41 Black Aces" The regular 1/72 Super/Strike Valkyrie is $11.26 USD. I really don't need any more of either model...

After release, there will be plenty available, probably cheaper than Luna Park. I still see the clear VF-1S popping up so I'm not worried about it.