Raya1823 Posted July 10, 2014 Share Posted July 10, 2014 Question. I redid my "Low Viz" Shelf. Which of the 1/60's should I put in Batroid? Or should I leave them in super sweet low viz squadron mode? I'm leaning toward the Roy Low Viz. They say imitation is the best form of flattery, so I'm copying like a freshman in Algebra class... Still need to refine by technique but thanks to Gakken85 I'll find my way. Quote Link to comment Share on other sites More sharing options...
Gakken85 Posted July 10, 2014 Share Posted July 10, 2014 Looks great man Insta-space for more valks Quote Link to comment Share on other sites More sharing options...
derex3592 Posted July 10, 2014 Share Posted July 10, 2014 Nice! Quote Link to comment Share on other sites More sharing options...
close313 Posted July 11, 2014 Share Posted July 11, 2014 That's awesome! It really looks like it's flying! Quote Link to comment Share on other sites More sharing options...
skullmilitia Posted July 11, 2014 Share Posted July 11, 2014 Don't buy the light mates, they eat batteries like a fat kid in a cake factory. I bought a set, and now they just sit in a box. It'll cost you more in batteries than Just buying wired LED's. Quote Link to comment Share on other sites More sharing options...
spanner Posted July 11, 2014 Share Posted July 11, 2014 They say imitation is the best form of flattery, so I'm copying like a freshman in Algebra class... Still need to refine by technique but thanks to Gakken85 I'll find my way. That looks so cool! Definitely gonna try this! Quote Link to comment Share on other sites More sharing options...
Saburo Posted July 11, 2014 Share Posted July 11, 2014 Nice display hazray13! Quote Link to comment Share on other sites More sharing options...
no3Ljm Posted July 11, 2014 Share Posted July 11, 2014 They say imitation is the best form of flattery, so I'm copying like a freshman in Algebra class... Still need to refine by technique but thanks to Gakken85 I'll find my way. Cool! Are you planning on posing them like their trying to cross each other while flying? Can't find a proper snapshot but this is where their fighting on EP4. Anyways, great display. Quote Link to comment Share on other sites More sharing options...
Falcon18 Posted July 11, 2014 Share Posted July 11, 2014 Cool! Are you planning on posing them like their trying to cross each other while flying? Can't find a proper snapshot but this is where their fighting on EP4. Anyways, great display. I was thinking about that when I saw the pic too. Haha. Do that cross flying scene hazray. Definitely will look awesome. Quote Link to comment Share on other sites More sharing options...
Raya1823 Posted July 11, 2014 Share Posted July 11, 2014 (edited) That's my end goal, I'm just trying to figure a way to pose them but still keeping the strings/stand hidden as much as possible. Here's some possible choices, with this back drop. Edited July 11, 2014 by hazray13 Quote Link to comment Share on other sites More sharing options...
The Old Man Posted July 11, 2014 Share Posted July 11, 2014 They say imitation is the best form of flattery, so I'm copying like a freshman in Algebra class... Still need to refine by technique but thanks to Gakken85 I'll find my way. Very cool. Looks grand. Quote Link to comment Share on other sites More sharing options...
The Old Man Posted July 11, 2014 Share Posted July 11, 2014 (edited) Looks great man Insta-space for more valks Lol.(100 posts!) Edited July 11, 2014 by The Old Man Quote Link to comment Share on other sites More sharing options...
spanner Posted July 11, 2014 Share Posted July 11, 2014 (edited) following Gakken85 & hazray13 lead, I thought I would give this a whirl myself! hung up my DYRL Hikaru VF-1A with some fishing line (was all I had) in a 'comin in hot n fast' gerwalk approach pose! I think it looks cool! Still gotta perfect the angle and adjust the lengths of line but this is a fairly good starting point! Didn't realize how much of a pain in the @55 fishing line was to handle especially tying small knots.. takes me back to my childhood days hanging up my model fighter planes in my bedroom! hehe! Will definitely do a few more like this! Let me know what you guys think! here are some happy snaps! Edited July 11, 2014 by spanner76 Quote Link to comment Share on other sites More sharing options...
derex3592 Posted July 11, 2014 Share Posted July 11, 2014 What did you secure the fishing line to in the cabinet??? Quote Link to comment Share on other sites More sharing options...
spanner Posted July 11, 2014 Share Posted July 11, 2014 (edited) I just tied the fishing line into loops and hooked them over the shelf supports in each corner. They are very secure! oh yeah you got the same cabinets! Edited July 11, 2014 by spanner76 Quote Link to comment Share on other sites More sharing options...
Raya1823 Posted July 11, 2014 Share Posted July 11, 2014 (edited) following Gakken85 & hazray13 lead, I thought I would give this a whirl myself! hung up my DYRL Hikaru VF-1A with some fishing line (was all I had) in a 'comin in hot n fast' gerwalk approach pose! I think it looks cool! Still gotta perfect the angle and adjust the lengths of line but this is a fairly good starting point! Didn't realize how much of a pain in the @55 fishing line was to handle especially tying small knots.. takes me back to my childhood days hanging up my model fighter planes in my bedroom! hehe! Will definitely do a few more like this! Let me know what you guys think! here are some happy snaps! Sweet!!! I'm picking up some cabinets this weekend for my valks, going to have some gerwalk poses in there now. Thanks for the idea. Yeah, I need to work on my a knots, need to find one that will be secure but still allow me to tweak the tension to adjust angles. I saw that 3m is making clear mini-hooks with clear tape, this will help with getting better line pulls. Let the games begin!! Edited July 11, 2014 by hazray13 Quote Link to comment Share on other sites More sharing options...
spanner Posted July 11, 2014 Share Posted July 11, 2014 Sweet!!! I'm picking up some cabinets this weekend for my valks, going to have some gerwalk poses in there now. Thanks for the idea. Yeah, I need to work on my a knots, need to find one that will be secure but still allow me to tweak the tension to adjust angles. I saw that 3m is making clear mini-hooks with clear tape, this will help with getting better line pulls. Let the games begin!! Might have to check out that 3M stuff! My cousin works for 3M actually so I might get him to look into if for me! I can't remember how to tie the adjustable knots that I made years ago when I had my old planes on display.. although I used string not fishing line so im not sure if you could do the same with it.. I was able to always adjust the flight angles of my models but I don't think I can use the same concept in the display cabinet as my planes were just hooked up directly above to the ceiling and not from side to side like I have just done with the VF-1.. might have to do some research on it. Was just messing around with a Kakizaki in fighter mode in an attempt to make a flying pose with the fishing line but I just cant seem to nail it.. I didn't want to move it to the middle of the shelf. I like it in the corner. Quote Link to comment Share on other sites More sharing options...
derex3592 Posted July 11, 2014 Share Posted July 11, 2014 I just tied the fishing line into loops and hooked them over the shelf supports in each corner. They are very secure! oh yeah you got the same cabinets! ok, sweet! Might give that a try this weekend. I had to have my dad help me tie the knots when I has a teenager to hang my plastic model airplanes from the ceiling cause I couldn't do it! Quote Link to comment Share on other sites More sharing options...
spanner Posted July 11, 2014 Share Posted July 11, 2014 ok, sweet! Might give that a try this weekend. I had to have my dad help me tie the knots when I has a teenager to hang my plastic model airplanes from the ceiling cause I couldn't do it! hehe! yep for the life of me I just cant remember how to do it! Tying the knots I mean.. Quote Link to comment Share on other sites More sharing options...
Gakken85 Posted July 11, 2014 Share Posted July 11, 2014 Looks cool spanner! Usually I tie a loop, leave just enough room to get the end through the loop again, and pull that tight... I think. I pull the line on both sides before I set the valk on it to test the knot. The hard part, to me is guessing the room I need. I should measure haha. Quote Link to comment Share on other sites More sharing options...
spanner Posted July 11, 2014 Share Posted July 11, 2014 Looks cool spanner! Usually I tie a loop, leave just enough room to get the end through the loop again, and pull that tight... I think. I pull the line on both sides before I set the valk on it to test the knot. The hard part, to me is guessing the room I need. I should measure haha. Thanks! it was a tricky but with a combination of a little guess work and holding the line with one hand and placing the valk with the other got a rough idea of where I wanted it to sit. I have since dropped the nose down about 5mm. Just enough to make it more balanced / natural looking pose. Quote Link to comment Share on other sites More sharing options...
abbadon Posted July 11, 2014 Share Posted July 11, 2014 My current setup. I need another detolf soon! Quote Link to comment Share on other sites More sharing options...
Gakken85 Posted July 11, 2014 Share Posted July 11, 2014 Sweet setup I like the SDF. Quote Link to comment Share on other sites More sharing options...
abbadon Posted July 11, 2014 Share Posted July 11, 2014 Thanks Gakken! Quote Link to comment Share on other sites More sharing options...
CoreyD Posted July 11, 2014 Share Posted July 11, 2014 Well, it's probably time for me to post my setup. Apologies for the image heavy post. My partner is gracious enough to let me indulge in the basement, but she's nixed anything upstairs, so the lighting is somewhat difficult 1/48's DYRL Macross Plus and Macross 7 Macross Frontier (Saving a spot for the YF-30 and RVF-171) SDFM More DYRL More SDFM - The Angel Bird racing the Fan Racer was fun to put together Macross Zero (Saving a spot for the VF-0D) Other Stuff, Transformers, Star Wars, Robocop, Blade Runner, Doctor Who, 1/55's More ephemera, Dune, Mego, Star Trek, Neca figures Quote Link to comment Share on other sites More sharing options...
Gakken85 Posted July 11, 2014 Share Posted July 11, 2014 (edited) Very clean and well done. I need to get my Low viz Camo into Batroid stat. I like him like that! Also... I gotta get a super ostrich soon I like that shelf the best. Are you using fishing wire or string? Edited July 11, 2014 by Gakken85 Quote Link to comment Share on other sites More sharing options...
jvmacross Posted July 11, 2014 Share Posted July 11, 2014 Well, it's probably time for me to post my setup. Apologies for the image heavy post. My partner is gracious enough to let me indulge in the basement, but she's nixed anything upstairs, so the lighting is somewhat difficult 1/48's Nice 1/48 Low-viz! Real man-caves are always in the basement! Quote Link to comment Share on other sites More sharing options...
close313 Posted July 11, 2014 Share Posted July 11, 2014 Good lord, I love your DYRL section where the VT-1 is at. It's just so perfectly set up. That Cf VF-1A in FAST packs is lovely! Quote Link to comment Share on other sites More sharing options...
Benson13 Posted July 11, 2014 Share Posted July 11, 2014 Great display Corey! Quote Link to comment Share on other sites More sharing options...
Falcon18 Posted July 11, 2014 Share Posted July 11, 2014 That is one beautiful display Corey. Everything's shown off nice and clean there. Nice. Quote Link to comment Share on other sites More sharing options...
CoreyD Posted July 11, 2014 Share Posted July 11, 2014 Thanks everyone! I appreciate the compliments! Very clean and well done. I need to get my Low viz Camo into Batroid stat. I like him like that! Also... I gotta get a super ostrich soon I like that shelf the best. Are you using fishing wire or string? I'm using monofilament fishing wire. The Elintseeker shelf is my favorite too. I have an idea to customize the FAST packs on that DYRL VF-1A CF into the green arrows squadron, but I need to do some coordinating to make it happen. Quote Link to comment Share on other sites More sharing options...
no3Ljm Posted July 11, 2014 Share Posted July 11, 2014 My current setup. I need another detolf soon! image.jpg Well, it's probably time for me to post my setup. Apologies for the image heavy post. My partner is gracious enough to let me indulge in the basement, but she's nixed anything upstairs, so the lighting is somewhat difficult *snip Those are SWEET! Nice displays. Quote Link to comment Share on other sites More sharing options...
sreichma Posted July 12, 2014 Share Posted July 12, 2014 Thanks very much. I quite like the warm light, I'll take some pictures of it later in the dark to show the difference. I like the neutral colour, anything else is a bit in your face when looking at the room on the whole. I did see the colour changing ones but went cheap lol. I bought a set of the color changing dioders from ikea by mistake for my single detolf downstairs. The brightest setting that should be white listed on the dial is blue. The 5 detolfs i have upstairs have the standard dioder with the warm light and you can see everything better. I'm not a fan of the variable dioder. It could be cool for some type of accent but I don't think it executes for the light I want to show a display. Good call grabbing the standards old man and the white detolf looks great. Quote Link to comment Share on other sites More sharing options...
abbadon Posted July 12, 2014 Share Posted July 12, 2014 Those are SWEET! Nice displays. Thanks man! I'll post better quality pics next time.Great display Corey! I should try this fish line method when I get more Valks, but I really like taking them out once in a while to play (repose) them. Quote Link to comment Share on other sites More sharing options...
no3Ljm Posted July 12, 2014 Share Posted July 12, 2014 Btw, have to ask since you guys are starting to put your valks on a fish/nylon line. Do you guys put something in between the line and your valk? Like a small cloth or thin paper to the contact area? Or you guys just lay the valk directly to the line? Thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.