pondo Posted January 4, 2010 Share Posted January 4, 2010 version 2 1/60's vf-os vf-1s roy vf-1s hikaru (dyrl) vf-1a hikaru (dyrl) vf-1a max (dyrl) vf-1a kakizaki (dyrl) vf-1j hikaru ami i missing any? If we want to stay clear of the potential problem, we should stay clear of these, right? Or has it been corrected for later or super part editions? Link to comment Share on other sites More sharing options...
Knightdramon Posted January 4, 2010 Share Posted January 4, 2010 Original versions of the following had problematic shoulders\shoulder hinges VF-0S VF-0A VF-0A ghost bundle --problem was fixed on VF-0S Ghost bundle and all subsequent VF-0S releases. Problem was on the actual shoulder socket itself. 1/60 V2.0 VF-1S Roy VF-1A Hikaru VF-1S Hikaru VF-1J Hikaru VF-1D And all versions of those that were released as bundles with fast packs [basically everything bar the VF-1D] has problematic shoulder hinges with faulty pins that caused cracks in the joint. The actual ball socketed shoulder is fine. All subsequent releases [from VF-1S Max and VF-1A TV max] and onwards have the problem fixed. Link to comment Share on other sites More sharing options...
pondo Posted January 4, 2010 Author Share Posted January 4, 2010 Original versions of the following had problematic shoulders\shoulder hinges VF-0S VF-0A VF-0A ghost bundle --problem was fixed on VF-0S Ghost bundle and all subsequent VF-0S releases. Problem was on the actual shoulder socket itself. 1/60 V2.0 VF-1S Roy VF-1A Hikaru VF-1S Hikaru VF-1J Hikaru VF-1D And all versions of those that were released as bundles with fast packs [basically everything bar the VF-1D] has problematic shoulder hinges with faulty pins that caused cracks in the joint. The actual ball socketed shoulder is fine. All subsequent releases [from VF-1S Max and VF-1A TV max] and onwards have the problem fixed. thanks, this issue really should be stickied with the "macross toy releases" thread so noobs like me don't get stung. Link to comment Share on other sites More sharing options...
Valkyrie addict Posted January 4, 2010 Share Posted January 4, 2010 All Yamato macross toys are to be considered faulty unless proven otherwise Link to comment Share on other sites More sharing options...
eugimon Posted January 4, 2010 Share Posted January 4, 2010 trolling aside, out of the v.2 1/60, only the 1s roy has shown to be systematically problem prone. The 1a hikaru has a few errors but it's been mostly clear since then. After the 1s/a max release, yamato reportedly changed the hinge pin to a gnurl free pin. Link to comment Share on other sites More sharing options...
Agent-GHQ Posted January 4, 2010 Share Posted January 4, 2010 Opened my Super VF-1J Hikky and does not have the cracked hinge! I supposed the gripes are found on the stand alone Valkyries than with the Super or Strike set? Link to comment Share on other sites More sharing options...
anime52k8 Posted January 4, 2010 Share Posted January 4, 2010 All Yamato macross toys are to be considered faulty unless proven otherwise all Yamato products are designed to disintegrate into dust two weeks after you open the package. Also, they contain lead... and asbestos... and depleted uranium. Link to comment Share on other sites More sharing options...
eugimon Posted January 4, 2010 Share Posted January 4, 2010 all Yamato products are designed to disintegrate into dust two weeks after you open the package. Also, they contain lead... and asbestos... and depleted uranium. lies. they only cost like they contain depleted uranium, but that's just not true. It is true that the hinge pins are actually hypodermic needles from drug users. Link to comment Share on other sites More sharing options...
kanedaestes Posted January 4, 2010 Share Posted January 4, 2010 My 1S Hikky, and VF-1D are good. I only know of the 1S Roy to have that issue, hence why i haven't bought one, plus i am holding out for a SDFM VF-1S roy is they make one, AND THEY SHOULD YAMATO!!!!!! WITH 2 PILOTS. Link to comment Share on other sites More sharing options...
Valkyrie addict Posted January 4, 2010 Share Posted January 4, 2010 HAHAHAHAHAHAHA!! good ones! Link to comment Share on other sites More sharing options...
Javabean Posted January 4, 2010 Share Posted January 4, 2010 Only my 1S Focker & 1A Hikaru hv the hinge prblms. 1S/1J Hikaru & 1D are still holding up well. Link to comment Share on other sites More sharing options...
Chronocidal Posted January 4, 2010 Share Posted January 4, 2010 Opened my Super VF-1J Hikky and does not have the cracked hinge! I supposed the gripes are found on the stand alone Valkyries than with the Super or Strike set? My stand alone 1J Hikky is fixed as well, the hinge pins are noticeably smaller. I did get two broken ones, both the stand alone Focker and the Strike Hikaru 1A, but they're fixed up just fine now. It's an annoying problem to be sure, but if you know how to fix them, I don't think it's worth skipping those versions entirely. You might even get a bargain for buying potentially cracked ones, then fixing them yourself. Link to comment Share on other sites More sharing options...
Shin Densetsu Kai 7.0 Posted January 4, 2010 Share Posted January 4, 2010 The 1st release Roy had the most breakages. Breakages were fewer and fewer as time went on. My Roy and Hikaru Strike Valks had cracked hinges. The VF-1J had a few, but if you had releases from the later runs after the Max types were released you should be okay(a few fans reported that some of their stand alone 1J's had the unknurled pins). VF-1D has the knurled pins on the 1st run but no reported shoulder hinge breakages. Link to comment Share on other sites More sharing options...
southpaw Posted January 4, 2010 Share Posted January 4, 2010 knock on wood my v2. hikaru vf-1s hinge is still ok. is there a picture of the unfortunate shoulder that broke so i know what to be careful or watch oout for? thanks Link to comment Share on other sites More sharing options...
Macross_Fanboy Posted January 4, 2010 Share Posted January 4, 2010 I'm not so sure about these hinge problems either, but maybe I don't fiddle with them nearly enough to warrant any breakage. I always look at the shoulders when I transform them. My VF-0 should be coming tomorrow so I'll be watchful for that if the delivery boy comes by more than once, if not I'll have to wait until Thursday for my VF-0A. Link to comment Share on other sites More sharing options...
miriya Posted January 4, 2010 Share Posted January 4, 2010 My VF-1D is fine too. Link to comment Share on other sites More sharing options...
Macross73 Posted January 5, 2010 Share Posted January 5, 2010 My stand alone 1J Hikky is fixed as well, the hinge pins are noticeably smaller. I did get two broken ones, both the stand alone Focker and the Strike Hikaru 1A, but they're fixed up just fine now. It's an annoying problem to be sure, but if you know how to fix them, I don't think it's worth skipping those versions entirely. You might even get a bargain for buying potentially cracked ones, then fixing them yourself. I have yet to check my valks but can you pm me with info on How to Fix this problem. my idea is to check with local hobby shops and replace the pins . I'm hoping that there aren't any stress marks or cracks . If there are then what should be done? Link to comment Share on other sites More sharing options...
holytoledo69 Posted January 5, 2010 Share Posted January 5, 2010 The only problem I ever had with a yamato is the SV-51.. it was on display for the longest in gerwalk mode.. when I went to straighten its legs for battroid mode, the whole hinge/thigh just fell apart.. I literally held it in my hands staring at it for a good five minutes.. it was soooo surreal.. Link to comment Share on other sites More sharing options...
Tugas Posted January 5, 2010 Share Posted January 5, 2010 The only problem I ever had with a yamato is the SV-51.. it was on display for the longest in gerwalk mode.. when I went to straighten its legs for battroid mode, the whole hinge/thigh just fell apart.. I literally held it in my hands staring at it for a good five minutes.. it was soooo surreal.. Mine too...not so spectacular, but almost. Any hopes/news about second production of Ivanov? Thanks. Link to comment Share on other sites More sharing options...
holytoledo69 Posted January 6, 2010 Share Posted January 6, 2010 Its a nice design too.. I doubt I'd buy another though.. so sad.. Link to comment Share on other sites More sharing options...
P.W.Royce Posted January 6, 2010 Share Posted January 6, 2010 Mine too...not so spectacular, but almost. Any hopes/news about second production of Ivanov? Thanks. OK, now I'm concerned, I just received a Nora type for Christmas. I have transformed her once, and noticed the knee joint on the left leg was very tight when straightening it. I used a toothpick to try and depress the little pawl in the joint. Might have helped. So the the part that broke was the ratcheting knee joint right? Link to comment Share on other sites More sharing options...
rsvictor1976 Posted January 7, 2010 Share Posted January 7, 2010 I saw these on HLJ. They were released in December 2009. Can anyone verify if these have the fixed shoulder hinge or are they the exact same ones as before? 1/60 VF-1S Roy Focker with Super & Strike Parts Plus http://www.hlj.com/product/YMT00180 1/60 VF-1S Hikaru Ichijo with Super & Strike Parts Plus http://www.hlj.com/product/YMT00179 Link to comment Share on other sites More sharing options...
Phalanix Posted January 7, 2010 Share Posted January 7, 2010 I saw these on HLJ. They were released in December 2009. Can anyone verify if these have the fixed shoulder hinge or are they the exact same ones as before? 1/60 VF-1S Roy Focker with Super & Strike Parts Plus http://www.hlj.com/product/YMT00180 1/60 VF-1S Hikaru Ichijo with Super & Strike Parts Plus http://www.hlj.com/product/YMT00179 Can't be 100% sure what you'll get, but I just got those two and they came with smooth pins... but shoulder design still look the same as others. Link to comment Share on other sites More sharing options...
do not disturb Posted January 8, 2010 Share Posted January 8, 2010 well this isn't looking good. i found some mystery cash in my pockets the other day and was finally going to pick one up but now i don't know? oh well i guess its a sign of sorts. Link to comment Share on other sites More sharing options...
HoveringCheesecake Posted January 8, 2010 Share Posted January 8, 2010 I might buy the TV Max 1A, but beyond that I'm done until they release a Hikaru 1J that is guaranteed not to have the bad pins. Link to comment Share on other sites More sharing options...
thegunny Posted January 8, 2010 Share Posted January 8, 2010 (edited) changed the hinge pin to a gnurl free pin. There's your problem. If they had of used a knurled pin it would have been fine Edited January 8, 2010 by thegunny Link to comment Share on other sites More sharing options...
1/1 LowViz Lurker Posted January 12, 2010 Share Posted January 12, 2010 (edited) thanks, this issue really should be stickied with the "macross toy releases" thread so noobs like me don't get stung. totally agree. Actually make an FAQ, then have that faq get updated each time new info is created. I would normally encourage others to buy yamato toys (casual fans of macross that don't come here) but I always worry that if I didn't read up on it on the MWboards I could be recommending something to them that is going to crack easily. A nice easy to read faq with all that info would save so much time. Edited January 12, 2010 by 1/1 LowViz Lurker Link to comment Share on other sites More sharing options...
Recommended Posts