Kurisama Posted May 22, 2013 Share Posted May 22, 2013 I dont wanna be a party pooper, cause I'd probably do the same things, lol - but wouldn't the point bit act as a lever and snap your neck in a bad fall? Quote Link to comment Share on other sites More sharing options...
Benson13 Posted May 22, 2013 Share Posted May 22, 2013 (edited) Small price to pay to look that cool. Where's the contact info for this guy? Edited May 22, 2013 by Benson13 Quote Link to comment Share on other sites More sharing options...
erikos0311 Posted May 22, 2013 Share Posted May 22, 2013 I dont wanna be a party pooper, cause I'd probably do the same things, lol - but wouldn't the point bit act as a lever and snap your neck in a bad fall? Well, Fullface DH helmets for moutain bikes are very similar and weigh a little less than the DOT motorcycle helmets. Some companies like FOX make both for biking and motorcross, so if a tree would get in my way going down a hill 20 miles an hr, i think i would be just fine. (thats what neck braces are for) lol. but yeah, it would get a little heavy after a while. Quote Link to comment Share on other sites More sharing options...
Chronocidal Posted May 22, 2013 Share Posted May 22, 2013 I'm tempted to grab one just because I could put it on my coffee table and/or wear it to conventions/halloween. I don't even ride. Quote Link to comment Share on other sites More sharing options...
Kicker773 Posted May 23, 2013 Share Posted May 23, 2013 my halo helmet is enough for that conversation to start with WTF....oh and seeing me run down my block with full halo armor on masterchief during haloween is enough to get the traffic to slow down. Quote Link to comment Share on other sites More sharing options...
Benson13 Posted May 23, 2013 Share Posted May 23, 2013 That is awesome. Quote Link to comment Share on other sites More sharing options...
Kurisama Posted May 23, 2013 Share Posted May 23, 2013 I'm tempted to grab one just because I could put it on my coffee table and/or wear it to conventions/halloween. I don't even ride. Same here! Quote Link to comment Share on other sites More sharing options...
Jasonc Posted May 23, 2013 Author Share Posted May 23, 2013 I sent an email over a year ago for one of these. So, are we all to go to their FB page, then write an email to them? I want one for certain. Quote Link to comment Share on other sites More sharing options...
xrentonx Posted May 23, 2013 Share Posted May 23, 2013 So tempted but I am saved because I don't use Facebook! My wallet is thanking me...but soooo tempted! Quote Link to comment Share on other sites More sharing options...
Jasonc Posted May 24, 2013 Author Share Posted May 24, 2013 Does anybody have any pictures of the Yamato 1/1 scale purple helmet? Quote Link to comment Share on other sites More sharing options...
94medition Posted May 24, 2013 Share Posted May 24, 2013 (edited) I have the Yamato helmet, but I still want to get this one. I actually log into my facebook account which I have not checked for months and search for Masei. I found their email (masei_helmet@hotmail.com) address and sent an email to inquire about the helmet. Here is what I got: "... Yes, I reserve one for you. They will be released after November as scheduled.We do have M L XL XXL for you. I save and keep your email already.US$189 for the first 200 units.. including shipping fee.. later, they will become US$289-339only limited to 1000 units for 5 years.Please stay with us in facebook page for this update and share our post in facebook." I then asked about if they will have yellow/white. Their second reply: "...yes, we will have yellow/white for you.. we will email you for this on Nov.. share this information in macross forum for me!" He (I assume) attached the following pictures in the email and saying they "will change it into more suitable for riding..." (I am guessing here) The helmet in the first 2 pics looks more like the Yamato helmet. The one on the Honda bike looks more proper in scale. The biggest problem with the Yamato helmet, is It is HUGE. I am 6'3" and it is still huge for me. There is also no straps or anything to secure it when you wear it. Here's some old pics I posted before. It will be great if they can scale the helmet to make it really wearable. I hope it will turn out good. Edited May 24, 2013 by 94medition Quote Link to comment Share on other sites More sharing options...
KH355hamdi Posted May 24, 2013 Share Posted May 24, 2013 I need to loose some weight. Lol. Quote Link to comment Share on other sites More sharing options...
Scyla Posted May 24, 2013 Share Posted May 24, 2013 I have the Yamato helmet, but I still want to get this one. I actually log into my facebook account which I have not checked for months and search for Masei. I found their email (masei_helmet@hotmail.com) address and sent an email to inquire about the helmet. Here is what I got: "... Yes, I reserve one for you. They will be released after November as scheduled. We do have M L XL XXL for you. I save and keep your email already. US$189 for the first 200 units.. including shipping fee.. later, they will become US$289-339 only limited to 1000 units for 5 years. Please stay with us in facebook page for this update and share our post in facebook." I then asked about if they will have yellow/white. Their second reply: "...yes, we will have yellow/white for you.. we will email you for this on Nov.. share this information in macross forum for me!" He (I assume) attached the following pictures in the email and saying they "will change it into more suitable for riding..." (I am guessing here) The helmet in the first 2 pics looks more like the Yamato helmet. The one on the Honda bike looks more proper in scale. The biggest problem with the Yamato helmet, is It is HUGE. I am 6'3" and it is still huge for me. There is also no straps or anything to secure it when you wear it. It will be great if they can scale the helmet to make it really wearable. I hope it will turn out good. Has the Yamato one a problem with fogging? Since it will be a helmet designed for riding around the Masei ones should not have any problems with that. I'm wondering if the front piece of the helmet will be removable like in the show and if you can slide the visor upwards like on a regular motorcycle helmet. Quote Link to comment Share on other sites More sharing options...
Renato Posted May 24, 2013 Share Posted May 24, 2013 Does anyone know what the deal is with licensing regarding these Masei ones? Quote Link to comment Share on other sites More sharing options...
94medition Posted May 24, 2013 Share Posted May 24, 2013 hamdi, nice ride! The NSX is such a cool car. Scyla, the Yamato SDF1 helmet does have fogging issue. It is really more for display not for wearing. With it being so big and no strap, it will make you look like a bobble head doll. Renato, I am not sure whether they have license or not. Your guess is as good as mine. Quote Link to comment Share on other sites More sharing options...
luusama Posted May 25, 2013 Share Posted May 25, 2013 I heard there is a place selling this helmet in facebook before. masei_helmet@hotmail.com Quote Link to comment Share on other sites More sharing options...
Vi-RS Posted May 25, 2013 Share Posted May 25, 2013 Here is what he posted on FB back in Apr 27. I assume he doesn't has any pre-production sample yet since he mentioned that the actual helmet will be 50% smaller. The air vent will be on the top to prevent fogging. The Yamato's is definitely huge in his hands. Masei Helmet Liked · April 27 Finally, I started this. Many emails asked for this air jet helmet for 1 year. A banker loans me a quarter of million dollars to do this project and I can keep this go on. Only 1000 units will be manufactured. That is it. The one in the pictures are scaled 2:1 and the real products will become half smaller to fit motorcycle riding. Air Vent will be on the top part for wind flowing...Will be available from October 2013. I make 200 units for facebook friends and members only. Please email us to sales@maseihelmets.com to reserve your size and color.Masei 911 Air Jet Motorcycle Open Face DOT & ECE Helmet - Limited to 1000 units only - An Idea from Macross Robotech Helmet and we are getting a trademark of this helmet in China this month.This is a 611 Open Face fiberglass shell with ECE & DOT standard applied and attached with three separate plastic outfits (top, cheek, and back parts)Only S M L XL (If other size, please contact us to sales@maseihelmets.com)The colors are Red/White, Black/Yellow, Black/Red, & Blue/White AvailableThe First 200 units are for Facebook friends and members for US$179 including shipping fee worldwide. If interested, please join our Masei Helmet Facebook Page. Please contact us for reservation - sales@maseihelmets.comThe Second 201-700 units for Chinese markets only.The remaining of (701-1000 units) are for wholesale and our online agency only and I set it for US$289 including shipping fee worldwide - http://www.hellohelmet.com/2013/04/masei-911-air-jet-motorcycle-open-face.html Quote Link to comment Share on other sites More sharing options...
Valkyrie addict Posted May 25, 2013 Share Posted May 25, 2013 Very nice!! Dude should get a lady friend to pose with the helmet in the pictures Quote Link to comment Share on other sites More sharing options...
Deadeye_281 Posted May 26, 2013 Share Posted May 26, 2013 I pulled the trigger on this too and sent an email to reserve if possible. Now to wait for a reply. I also asked if they plan to do any black/grey color variants for all the Low Vis fans out there like me. Quote Link to comment Share on other sites More sharing options...
Jasonc Posted May 28, 2013 Author Share Posted May 28, 2013 I pulled the trigger on this too and sent an email to reserve if possible. Now to wait for a reply. I also asked if they plan to do any black/grey color variants for all the Low Vis fans out there like me. I asked to get one done in the purple color that Yamato made one in when they first released their 1/1 scale helmets. They said they'd do it, but it cost more. That said, I'm cool with that. I just need a good picture of that purple color. Anybody have pictures or a link to where one of those helmets are at? Quote Link to comment Share on other sites More sharing options...
Deadeye_281 Posted May 29, 2013 Share Posted May 29, 2013 Got a response albeit a limited one stating that they'd save my email and contact me in the fall. They never mentioned my color choice inquiry or size info or anything. They gave a release date of November/December at $189 USD - guess I'm in the initial release club. Why do I get the feeling that this won't pan out? Quote Link to comment Share on other sites More sharing options...
skullmilitia Posted May 29, 2013 Share Posted May 29, 2013 Just have faith man, they seem to be a pretty big Helmet company, albeit new and upcoming. Quote Link to comment Share on other sites More sharing options...
Deadeye_281 Posted May 29, 2013 Share Posted May 29, 2013 Just have faith man, they seem to be a pretty big Helmet company, albeit new and upcoming. Yeah, you're probably right. Hopefully it'll work out and they can hook me up with Low Vis colors to boot. Quote Link to comment Share on other sites More sharing options...
ashuram Posted July 26, 2013 Share Posted July 26, 2013 Anyone try contacting them recently? I sent them an email, but no response whether they got my preorder. I tried to friend them on facebook but couldn't (I pretty much never use facebook so maybe I did it wrong?). I MUST own the motorcycle helmet. Anyone able to friend them? I was able to "like" their masei motors page. Anyone recently have luck getting a response to a preorder email request? Quote Link to comment Share on other sites More sharing options...
Falconkpd Posted July 30, 2013 Share Posted July 30, 2013 I wonder how hard it would be to get a TSV-40 helmet made? (The one from Digital Mission VF-X)Such a cool flight suit.http://sketchleystats.webatu.com/Statistics/Flightsuits/unif_2048_vf.jpg Quote Link to comment Share on other sites More sharing options...
moy Posted November 12, 2013 Share Posted November 12, 2013 Still working on the mold probably by the end of the year or early next year. Quote Link to comment Share on other sites More sharing options...
skullmilitia Posted November 12, 2013 Share Posted November 12, 2013 I just got a message from Masei, that it's still good for a December release and emails for early supporters will be sent out then. Quote Link to comment Share on other sites More sharing options...
Smiley424 Posted November 13, 2013 Share Posted November 13, 2013 Just saw this and immediately emailed Masei to order a helmet. This will work for riding and Macross cosplay I am currently planning for next year (SDCC or Otakon Baltimore). I really hope I am able to get in on this. I don't know if it is good or bad that every time I check back in on the MW forum, I end up spending money! Quote Link to comment Share on other sites More sharing options...
Jasonc Posted November 13, 2013 Author Share Posted November 13, 2013 This is going to be part of my DYRL cosply flight suit. Finally, a helmet I can actually wear that isn't a few times larger than my head. Quote Link to comment Share on other sites More sharing options...
Valkyrie addict Posted November 14, 2013 Share Posted November 14, 2013 (edited) I plan to get this and use it to go gokarting with my friends. Would certainly take the attention off my crazy driving. Edited November 14, 2013 by Valkyrie addict Quote Link to comment Share on other sites More sharing options...
ashuram Posted November 15, 2013 Share Posted November 15, 2013 Got a response from Masei, my preorder is set. Yay!!!! Gonna get a Hikaru, Roy and Max. The set is gonna look real nice on my bookcase wall with the rest of my Anime figures and Valkyries. I'm thinking I'll devote a shelf for each helmet and put little knick knacks that match each character. Hikaru's shelf will have a picture in a frame of Hikaru and Minmay in front of the fountain from the anime (just gotta find a nice high res picture and print it out on photo paper), photo of him and Misa (see below), a fanliner plane (see below), dogtags (from the Toynami/Popbox Hikaru Figure), and his Valkyrie (don't have the Yamato version, but have the 1/55 Bandai version and the Robotech Masterpiece collection version). Max will have a Yamato Milia figure (see below), his Valkyrie (Masterpiece collection), maybe a gold chain (lol, Robotech dub reference, when Max said that to Hikaru before his date with Milia), blue tinted glasses, the photo below in a frame as well. Roy will have his Valkyrie (Bandai or Masterpiece, haven't decided). Claudia photo in frame (see below). A model kit of the Fokker plane (the one Hikaru drops in the hospital when he learns Roy is dead). Maybe a plastic pineapple? What do you guys think? Max and Roy's shelf seems a little sparse though, anyone have any ideas for more knick knacks I can add to each of their shelves? Maybe a drinking glass to Roy's shelf? Thoughts? Comments? Aspersions? All are welcome. Quote Link to comment Share on other sites More sharing options...
erikos0311 Posted November 15, 2013 Share Posted November 15, 2013 (edited) Got a response from Masei, my preorder is set. Yay!!!! Gonna get a Hikaru, Roy and Max. The set is gonna look real nice on my bookcase wall with the rest of my Anime figures and Valkyries. I'm thinking I'll devote a shelf for each helmet and put little knick knacks that match each character. Hikaru's shelf will have a picture in a frame of Hikaru and Minmay in front of the fountain from the anime (just gotta find a nice high res picture and print it out on photo paper), photo of him and Misa (see below), a fanliner plane (see below), dogtags (from the Toynami/Popbox Hikaru Figure), and his Valkyrie (don't have the Yamato version, but have the 1/55 Bandai version and the Robotech Masterpiece collection version). Max will have a Yamato Milia figure (see below), his Valkyrie (Masterpiece collection), maybe a gold chain (lol, Robotech dub reference, when Max said that to Hikaru before his date with Milia), blue tinted glasses, the photo below in a frame as well. Roy will have his Valkyrie (Bandai or Masterpiece, haven't decided). Claudia photo in frame (see below). A model kit of the Fokker plane (the one Hikaru drops in the hospital when he learns Roy is dead). Maybe a plastic pineapple? What do you guys think? Max and Roy's shelf seems a little sparse though, anyone have any ideas for more knick knacks I can add to each of their shelves? Maybe a drinking glass to Roy's shelf? Thoughts? Comments? Aspersions? All are welcome. That's awesome!! So when did you first notify them about purchasing one ?? I sent them a message back in May thru their Facebook page and still have not recieved any emails or messages of them reserving one for me.. I also emailed them on their web page back then and have not heard from them at all. Did you email them on their web page address?? Facebook? Edited November 15, 2013 by erikos0311 Quote Link to comment Share on other sites More sharing options...
Smiley424 Posted November 18, 2013 Share Posted November 18, 2013 So far I have emailed twice to sales@maseihelmets.com, once through "Contact Us" form on maseihelmets.com website, and I just emailed today to masei_helmet@hotmail.com. So far no response to any of my inquiries. Quote Link to comment Share on other sites More sharing options...
skullmilitia Posted November 18, 2013 Share Posted November 18, 2013 It took them about two weeks to respond to my Facebook message. They were close to being done with the first 200 orders. A month or so back. Quote Link to comment Share on other sites More sharing options...
Deadeye_281 Posted November 19, 2013 Share Posted November 19, 2013 I emailed these guys last spring and was included on an early buyer list but I haven't heard a thing since. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.