mslz22 Posted August 13, 2005 Share Posted August 13, 2005 one quick thing for size reference, (because i got a PM about it ) look more at the HCM than the yamato 1/60, also keep in mind this will be about 2 inches taller than it appears here with the bottom and the drive unit in place thanks mike Link to comment Share on other sites More sharing options...
HWR MKII Posted August 13, 2005 Share Posted August 13, 2005 Your My Hero! Please save one for me to get when i get back from deployment in january. I do not want to miss this one. Link to comment Share on other sites More sharing options...
agass4u Posted August 15, 2005 Share Posted August 15, 2005 I want one of those! Man, it sucks being poor!!! Link to comment Share on other sites More sharing options...
mojacko Posted August 16, 2005 Share Posted August 16, 2005 man those are really N-I-C-E!!! great work!!! cant wait to see it finish .... Link to comment Share on other sites More sharing options...
mslz22 Posted August 16, 2005 Share Posted August 16, 2005 Not too much to show today, here is one part of the arm, the one that mounts to the inner cannon and the start of the big upper cannon. I threw the cannon mount and a few other parts into a small mold (stuff i need mutiples of), including the rear missle hatch, i will get pics of that up in the next few days mike Link to comment Share on other sites More sharing options...
mslz22 Posted August 18, 2005 Share Posted August 18, 2005 these cannon mounts will be part of the main body, i just need to get them glued and molded in. the cannon mount have a socket, and the cannon will connect with a balljoint so you can pose them. these back missle hatches will be cast seperate and there will be a detail part for the missle bay if you want to display it with the missle bay open. I've started on the drive unit and have started some of the panel lines on the more complete parts. thanks mike Link to comment Share on other sites More sharing options...
HWR MKII Posted August 18, 2005 Share Posted August 18, 2005 Mike your freaking me out! i cannot wait to get this sucker. This will be the end all be all of macross kits from the look of it. Link to comment Share on other sites More sharing options...
jorawar_b Posted August 18, 2005 Share Posted August 18, 2005 Mike your freaking me out! i cannot wait to get this sucker. This will be the end all be all of macross kits from the look of it. 321364[/snapback] Mike your my hero, I wanna be like mike Link to comment Share on other sites More sharing options...
mslz22 Posted August 19, 2005 Share Posted August 19, 2005 Not much of an update, but i thought this looked cool, the forward hollow part of the cannon will be this PVC or ABS tubing (i can't remember which this is) so it will not droop over time. they will be included of course. the 3 detail rings will be cast seperate, and will just slip over the tubing.... mike Link to comment Share on other sites More sharing options...
Ranger565 Posted August 19, 2005 Share Posted August 19, 2005 <--- Faints, hits floor, Link to comment Share on other sites More sharing options...
big F Posted August 20, 2005 Share Posted August 20, 2005 <--- Faints, hits floor, Â 321518[/snapback] Well just registerd for this forum. Dont know how ive missed it all this time. WOW WOW !!! is about all I can say makes the 200 scale look dinky. Hell why not make a 1/1 scale one then I could sell the house and move into it. Link to comment Share on other sites More sharing options...
jorawar_b Posted August 20, 2005 Share Posted August 20, 2005 Yeah I think the 1/1 scale would be good, put a twin turbo supercharged electric motor...lol We can add some big BB gun cannons, NO2 powered...lol Link to comment Share on other sites More sharing options...
hirohawa Posted August 20, 2005 Share Posted August 20, 2005 (edited) Looks awesome! Is there going to be any poseabilty in the arms/legs guns? Edited August 20, 2005 by hirohawa Link to comment Share on other sites More sharing options...
Jasonc Posted August 20, 2005 Share Posted August 20, 2005 With god-like size!!! Mike, amazing! Simply amazing, I'm in for one for sure. And Big F, welcome to the boards man!!! Link to comment Share on other sites More sharing options...
mslz22 Posted August 20, 2005 Share Posted August 20, 2005 Is there going to be any poseabilty in the arms/legs guns? Yes, unlike the other 1/72 kit the legs will have a ball and socket set up so that the legs can pitch out in a V shape like much of the line art etc. the arms will be cast in 3 seperate parts so that you can position them the way that you would like. that being said, the kit will be kind of a "pick a pose" type of a deal, meaning that unless you want to customize it to have screws etc it will need to be glued in one pose for the most part. began work on the engine cover today... thanks for all the encouraging remarks. mike Link to comment Share on other sites More sharing options...
Viceland Posted August 20, 2005 Share Posted August 20, 2005 Hey Baby!! Nice ass!!... ...what? WHAT?? Link to comment Share on other sites More sharing options...
UNSpacy Posted August 21, 2005 Share Posted August 21, 2005 This looks incredible. Definitely add me to the list! Thanks. UNSpacy Canadian Division Link to comment Share on other sites More sharing options...
Less than Super Ostrich Posted August 24, 2005 Share Posted August 24, 2005 Mike... it looks absolutely amazing. Gigantic! Oooooh it will be fun to put lots of greeblies on this puppy. One question... the arms look a little short relative to the body. However, I don't have any lineart, so I may just be talkin' out my arse like usual. Once again... great work! Could be the most anticipated kit this year! Link to comment Share on other sites More sharing options...
jadefalconguard Posted August 24, 2005 Share Posted August 24, 2005 Pinch.......auch...this is for real Awesome work, need to get one, need to get one. Now I know what to ask for Xmas to my wife Link to comment Share on other sites More sharing options...
mslz22 Posted August 24, 2005 Share Posted August 24, 2005 One question... the arms look a little short relative to the body. The arm cannons are not at full length yet, beyond the need for the back half, the front is going to have a "cap" that will be at least 1/4 (a little more actually) of an inch long, the "cap" will bring the 2 halfs of the cannon together as well as fill in the detail of the cannons. this allows me to keep the cannons hollow, once it is added i think the length should be just about right. I've been sick with a cold again (started at the daycare, wife got it, kid got it, it was only a matter of time before i got it) so i've made only a little progress the last few days but should be up and running some more this weekend, in fact the wife and kid are going away with friends and i get free rein over my time this weekend , i think i can actually see the finish line from here. mike Link to comment Share on other sites More sharing options...
Viceland Posted August 24, 2005 Share Posted August 24, 2005 I've been sick with a cold again (started at the daycare, wife got it, kid got it, it was only a matter of time before i got it) so i've made only a little progress the last few days but should be up and running some more this weekend, in fact the wife and kid are going away with friends and i get free rein over my time this weekend , i think i can actually see the finish line from here.mike 322881[/snapback] Good, then that means the masters should be all done by Sunday evening, early Monday morning correct? That's great news!!! So, while everybody is sending you payment with PP, the molds should all be ready by Monday evening, then it's on to casting 28 kits by Wednesday night, pack & ship everything out on Thursday morning using a "Next Day Noon" courrier service, we should all have our kits in hand by Friday!!! WOOHOO!!!! Seriously Mike, take it easy, get some rest and recover properly... cause you'll need to get plenty of rest if you're to follow my "roadmap" to the letter, I figure if you stay awake and work on this 24/7 till next Thursday, it can be done NOOOOO problem!!! "In the beginning, Mike created 1/72 Monster HWR-MkII... work, work, work... and on the seventh dayeth, Miketh restedeth" Link to comment Share on other sites More sharing options...
Grayson72 Posted August 25, 2005 Share Posted August 25, 2005 (edited) So since it looks like you're not afraid of large modeling projects how bout next on the build list a Zentradi Recon Scout Bugeye? It'd be big but not larger than the monster. The Imai kit is 1/720 so you'd just have to blow up the dimnsions 10x, you can borrow mine if you want I know this is way preliminary but I thought I'd plant that seed in your mind while I thought of it. Edited August 25, 2005 by Grayson72 Link to comment Share on other sites More sharing options...
HWR MKII Posted August 25, 2005 Share Posted August 25, 2005 Can i do the proof build for your kit mike? PLEASSSSEEEE! Look at my online name, comeon how can you resist . Ill pay early for a pre release kit if you want to work out bugs. Ill even keep it secret. oops Link to comment Share on other sites More sharing options...
007-vf1 Posted August 25, 2005 Share Posted August 25, 2005 what I would really like to see is the Neusjudale-ger(sp) Zentral battle suit from DYRL in 1/72 or any male battle suit for that matter... Whos making the DYRL meltran soldier in 1/72 scale..? Link to comment Share on other sites More sharing options...
Gundamhead Posted August 25, 2005 Share Posted August 25, 2005 So since it looks like you're not afraid of large modeling projects how bout next on the build list a Zentradi Recon Scout Bugeye? It'd be big but not larger than the monster. The Imai kit is 1/720 so you'd just have to blow up the dimnsions 10x, you can borrow mine if you want I know this is way preliminary but I thought I'd plant that seed in your mind while I thought of it. 323063[/snapback] You may want to reconsider. The bugeye is a little bit bigger. The Monster is 41m long the Bugeye is 126m long. Monster in 1/72 = 22.4" Bugeye in 1/72 = 68.8" Now, if you got that much space, it ought to go to a 1/350 Prometheus at 57.5". Or 1/200 to use the Nichimo kits, but it'll be 100.7" We need a Macross museum, and be able to accept donations, and lotsa space for big projects. Mslz22, that's coming along very nicely! Link to comment Share on other sites More sharing options...
Grayson72 Posted August 25, 2005 Share Posted August 25, 2005 So since it looks like you're not afraid of large modeling projects how bout next on the build list a Zentradi Recon Scout Bugeye? It'd be big but not larger than the monster. The Imai kit is 1/720 so you'd just have to blow up the dimnsions 10x, you can borrow mine if you want I know this is way preliminary but I thought I'd plant that seed in your mind while I thought of it. 323063[/snapback] You may want to reconsider. The bugeye is a little bit bigger. The Monster is 41m long the Bugeye is 126m long. Monster in 1/72 = 22.4" Bugeye in 1/72 = 68.8" Now, if you got that much space, it ought to go to a 1/350 Prometheus at 57.5". Or 1/200 to use the Nichimo kits, but it'll be 100.7" We need a Macross museum, and be able to accept donations, and lotsa space for big projects. Mslz22, that's coming along very nicely! 323111[/snapback] Oh well my bad Link to comment Share on other sites More sharing options...
Less than Super Ostrich Posted August 26, 2005 Share Posted August 26, 2005 I've been sick with a cold again (started at the daycare, wife got it, kid got it, it was only a matter of time before i got it) 322881[/snapback] I know the feeling. these kids get together with their running noses. daycare becomes virus central. ane us mamas and papas pay the price! Link to comment Share on other sites More sharing options...
mslz22 Posted August 26, 2005 Share Posted August 26, 2005 I know the feeling. these kids get together with their running noses. daycare becomes virus central. ane us mamas and papas pay the price I know, love my daughter, but when she gets around other kids it just turns into a germ factory So not much as i am just getting back to working, here is a pic of the as of now empty engine compartment....started to add some of the detailing... Link to comment Share on other sites More sharing options...
jardann Posted August 26, 2005 Share Posted August 26, 2005 Lookin' great! Link to comment Share on other sites More sharing options...
Ranger565 Posted August 27, 2005 Share Posted August 27, 2005 Mike your starting to scare me with your talent!! HOLY! Ranger565 Link to comment Share on other sites More sharing options...
big F Posted August 27, 2005 Share Posted August 27, 2005 (edited) Us mere mortals are in awe of your talents. You should do a few how to become a model maker classes then we could all try and be as good as you. Edited August 27, 2005 by big F Link to comment Share on other sites More sharing options...
HWR MKII Posted August 27, 2005 Share Posted August 27, 2005 Why would he do that. If he taugt all of us he would be out of a job Link to comment Share on other sites More sharing options...
Viceland Posted August 27, 2005 Share Posted August 27, 2005 Why would he do that. If he taugt all of us he would be out of a job 323637[/snapback] You're one to talk!! It's not like YOU would need classes from Mike, I would consider you in the same league... I hope I don't offend Mike here!! Link to comment Share on other sites More sharing options...
HWR MKII Posted August 27, 2005 Share Posted August 27, 2005 Oh i think Mike is way above my level. I can still learn a thing or two. I look at my stuff and i see the flaws. I look at stuff like mikes or WM Chengs and i am sometimes speechless, even when they pick out the flaws. Link to comment Share on other sites More sharing options...
Myersjessee Posted August 27, 2005 Share Posted August 27, 2005 Looking sweet Mike! Link to comment Share on other sites More sharing options...
Recommended Posts