Whats Lying on your Workbench MK IV

[nightmareB4macross]

22 hours ago, Papa Rat said:

Thanks for the compliment!

It’s supposed to be the VF-1D but lacks any details for the most part. 
Have a look.

That’s the VF-1C. Nice.

The kit is labeled as the VF-1D. The version of that head makes an appearance in Macross Design Works and possibly in SDF-M in grey.

The 15th anniversary VF figures also had this unique head found on the Super VF-1D GERWALK, but not in the Battroid. 🧐

https://anymoon.com/blog/?p=5625

Very cool.

 

 

[MechTech]

@Cheese3 Your Misa figure looks good! I lost the eye decals for mine, so she came out looking more like Little Orphan Annie!🤣

@derex3592 Your work areas are looking great! Congrats!

@Papa Rat The paint on your -1D looks REALLY good! Nice shading with the color mixtures.

@Chas The mods to your SDF-1 made it look much better!

@pengbuzz I saw a video online on how to save money model building. One of the suggestions was to use a watered down solution of white vinegar for a decal setting solution. I always thought setting solution smelled like acetic acid. I would give it a shot! - MT

[Papa Rat]

1 hour ago, nightmareB4macross said:

That’s the VF-1C. Nice.

The kit is labeled as the VF-1D. The version of that head makes an appearance in Macross Design Works and possibly in SDF-M in grey.

The 15th anniversary VF figures also had this unique head found on the Super VF-1D GERWALK, but not in the Battroid. 🧐

https://anymoon.com/blog/?p=5625

Very cool.

 

 

Wow. Thanks for the info and link. I’ll check it out. 
 

Thanks for the kind words @MechTech

[Big s]

5 hours ago, nightmareB4macross said:

That’s the VF-1C. Nice.

The kit is labeled as the VF-1D. The version of that head makes an appearance in Macross Design Works and possibly in SDF-M in grey.

The 15th anniversary VF figures also had this unique head found on the Super VF-1D GERWALK, but not in the Battroid. 🧐

https://anymoon.com/blog/?p=5625

Very cool.

 

 

I have a feeling that Arii just f***** up the sculpt on the tucked in head. Then again they could’ve tried sneaking something in that they thought no one would notice, but I’m pretty sure they messed up.

they may not have had the best of art to go on and just figured it was good enough. Some of the box arts looked a bit funky at the time as well. Arii wasn’t always the best at details or proportions. I’m still surprised at the overall appearance of their fighter kit in comparison to the oddities on the fighter and gerwalk kits

[Papa Rat]

Work is underway on the IMAI 1/48 scale Orguss M.Lover Lieea.

I’m currently modifying the rear vents to be closer to the animation artwork. This is my first foray into using Milliput…I think I like it? I roughed in the area I wanted to change and will dial it in tomorrow when it hardens. 
 

[nightmareB4macross]

5 hours ago, Big s said:

I have a feeling that Arii just f***** up the sculpt on the tucked in head. Then again they could’ve tried sneaking something in that they thought no one would notice, but I’m pretty sure they messed up.

they may not have had the best of art to go on and just figured it was good enough. Some of the box arts looked a bit funky at the time as well. Arii wasn’t always the best at details or proportions. I’m still surprised at the overall appearance of their fighter kit in comparison to the oddities on the fighter and gerwalk kits

Not quite. The VF-1C was an intended VF. 

[Papa Rat]

14 minutes ago, nightmareB4macross said:

Not quite. The VF-1C was an intended VF. 

Thanks for the reference material. Very cool. The head on the runner is exactly like the one that came in that VF-1D fighter. 

[Big s]

11 hours ago, nightmareB4macross said:

Not quite. The VF-1C was an intended VF. 

Did they just mess up and make that alternate head and then just get lazy and not change it in the fighter and gerwalk? Just wondering since it’s labeled as 1D

[MechTech]

@Papa Rat Cool! I haven't built one of those in decades! Looking forward to it!

@nightmareB4macross Thanks for sharing that! I forgot about that awkward designed head! - MT

[Papa Rat]

The milliput looked like crap and I would say it was unsuccessful. So I figured addition by subtraction will work better. I don’t own a micro saw or whatever so I used a big old hacksaw to cut off the rear. You make do with what you got. It was a mess but I rebuilt it with a few pieces of .5 mm pla to make up for all the material I lost in sawing, reattached both halves and I think it worked out great. In doing so I created a panel line that I was going to scribe in anyways.

Edited May 7 by Papa Rat

[Thom]

Good improvement!

[Papa Rat]

59 minutes ago, Thom said:

Good improvement!

Thanks. There was some trepidation in sawing it in half but it was not a big deal. A first for me. 

[Urashiman]

Upgrading over 35 years old TT model trains today. The double deck wagon will receive lights. I had to build in connections so it can draw power from the wheels, and then build a full bridge rectifier from diodes so the light inside is always on (not just one way… because diodes).

hahaha

and I build a new motor into the locomotive. It didn’t work, and took me three hours to figure out the issue. Bad connection to draw power. Hurgh…

 

doing these for my older brother. I am more the h0 nerd.

[MechTech]

@Papa Rat Nice fixes to the rear. By the way, use Milliput when it is still wet. It smooths down great with water and your fingers saving sanding, and trim it with blades while still semi-cured. It is good stuff. It just needs practice like any tool.

@Urashiman Cool! Getting all electronicy too! I looked through my dad's old Lionel train stuff. There was this glob of aluminum with fins about the size of a small matchbox. I asked him what it was. He said, "A diode"! Technology sure has changed! 😁- MT

[Papa Rat]

@MechTech Thanks for the pointers. I finally have a monster kit on the way and I hear it eats up the putty. 

[Big s]

2 hours ago, Papa Rat said:

@MechTech Thanks for the pointers. I finally have a monster kit on the way and I hear it eats up the putty. 

Is it the Imai one? because I know for sure that one definitely eats the putty. All four cannons every part on the legs and the rms and the body. Lots of big seams. Also alignment issues as well. Some big parts on the arms were warped a bit as well from what I remember. It looks great if you really put in the work though 

 

 

 

I’ve never seen the Arii kit actually built, so if it’s that one, I’d love to see all the steps.

[Papa Rat]

20 minutes ago, Big s said:

Is it the Imai one? because I know for sure that one definitely eats the putty. All four cannons every part on the legs and the rms and the body. Lots of big seams. Also alignment issues as well. Some big parts on the arms were warped a bit as well from what I remember. It looks great if you really put in the work though 

 

 

 

I’ve never seen the Arii kit actually built, so if it’s that one, I’d love to see all the steps.

This is the one arriving next tuesday

I didn’t know there was an ARII version  I kept seeing this and the Bandai

Edited May 8 by Papa Rat

[Papa Rat]

8 minutes ago, pengbuzz said:

You might be better off buying a can of MEK and throwing old sprue into it to make sprue goo.

That’s a great idea. I haven’t made it before and would love to give a go. 👍

[Urashiman]

8 hours ago, MechTech said:

@Papa Rat Nice fixes to the rear. By the way, use Milliput when it is still wet. It smooths down great with water and your fingers saving sanding, and trim it with blades while still semi-cured. It is good stuff. It just needs practice like any tool.

@Urashiman Cool! Getting all electronicy too! I looked through my dad's old Lionel train stuff. There was this glob of aluminum with fins about the size of a small matchbox. I asked him what it was. He said, "A diode"! Technology sure has changed! 😁- MT

yeah man ... those big diodes ... They are still around for high voltage/power systems. 

[Big s]

4 hours ago, Papa Rat said:

This is the one arriving next tuesday

I didn’t know there was an ARII version  I kept seeing this and the Bandai

That’s the Imai one. If you look close at the lower right corner, you can see their logo. Bandai bought their molds and it the same kit. So if you see a bandai one, it’s just a more recent production run of that kit. That goes for a good amount of Imai kits. Bandai often rereleases their old models under their name for anniversary specials.

Anyway, get ready to really put in some work on those seams and stock up on that glue and putty. You may also want to practice scribing as well. I remember the panels on the face didn’t match too well and it will be easier to fill in one side and prescribe them. I think I had to use hot water to straighten out the arms to align them.

[Papa Rat]

2 hours ago, Big s said:

That’s the Imai one. If you look close at the lower right corner, you can see their logo. Bandai bought their molds and it the same kit. So if you see a bandai one, it’s just a more recent production run of that kit. That goes for a good amount of Imai kits. Bandai often rereleases their old models under their name for anniversary specials.

Anyway, get ready to really put in some work on those seams and stock up on that glue and putty. You may also want to practice scribing as well. I remember the panels on the face didn’t match too well and it will be easier to fill in one side and prescribe them. I think I had to use hot water to straighten out the arms to align them.

Oh boy. I’m up for the challenge. Thanks for the heads up. 👍

[Big s]

31 minutes ago, Papa Rat said:

Oh boy. I’m up for the challenge. Thanks for the heads up. 👍

It can be a challenge, but I’ve seen your recent stuff and I think you can handle it

[Papa Rat]

Hey thanks @Big s that’s nice to hear.

My 1 year anniversary of building models is coming up on the 17th. I have made some progress along the way, but I’m still very much a noob compared to most everyone here.

I’m here to soak up all the sage advice I can get. I figure I just need to keep building a bunch and challenging myself. Oh and have fun. 

[GMK]

Designed & printed my own Griffin III. This is the 1:1:

The design.

Printed parts:

The paint mules  

Edited May 9 by GMK

[pengbuzz]

15 hours ago, Papa Rat said:

Hey thanks @Big s that’s nice to hear.

My 1 year anniversary of building models is coming up on the 17th. I have made some progress along the way, but I’m still very much a noob compared to most everyone here.

I’m here to soak up all the sage advice I can get. I figure I just need to keep building a bunch and challenging myself. Oh and have fun. 

Hey, we all start somewhere, and you're doing a great job thus far! Don't worry; each build will expand your skills and before you know it, you'll be helping new folks out as well!

[Papa Rat]

2 minutes ago, pengbuzz said:

Hey, we all start somewhere, and you're doing a great job thus far! Don't worry; each build will expand your skills and before you know it, you'll be helping new folks out as well!

Thanks for the encouragement. I’m having a blast.  Every interaction I have had on this forum so far has been positive and lead me to find confidence in trying new ways of building etc… big thanks all around!

[MechTech]

@GMK AWESOME sculpt and a radical looking design! - MT

[SteveTheFish]

 

My Asuka and Rei sofubi figures are looking good! I was thinking I'd do some pastel chalk in their hair to darken the recesses, but I haven't decided yet.

[Papa Rat]

4 hours ago, SteveTheFish said:

 

My Asuka and Rei sofubi figures are looking good! I was thinking I'd do some pastel chalk in their hair to darken the recesses, but I haven't decided yet.

Looking good!

[Cheese3]

Model party!

[Big s]

16 minutes ago, Cheese3 said:

Model party!

That’s some cool old school lighting for some cool old school kits

[Papa Rat]

43 minutes ago, Cheese3 said:

Model party!

Oh yeah!!!! 

[nightmareB4macross]

Good Lord! I’m off customizing more and you guys are over here hitting out of the park with some amazing 3D work, model, and figure painting.

Great work everyone!

Do You Remember this scene.

 

JF for comparison. Note anything different??

[Papa Rat]

28 minutes ago, nightmareB4macross said:

Good Lord! I’m off customizing more and you guys are over here hitting out of the park with some amazing 3D work, model, and figure painting.

Great work everyone!

Do You Remember this scene.

 

JF for comparison. Note anything different??

Love the updates! Your project is looking great. 👍

[nightmareB4macross]

41 minutes ago, Papa Rat said:

Love the updates! Your project is looking great. 👍

Thank you. 

Can’t wait to see you finish those Orguss kits.

Edited May 11 by nightmareB4macross