Papa Rat Posted May 30 Posted May 30 10 minutes ago, Big s said: I remember it actually being a fairly cool kit other than the massive hands that you already replaced. I do kinda remember the long pegs at the shoulders being a bit weak and may end up needing a fix down the road if you’re not too careful. Can’t wait to see it finished Just need to add the black paint layers, decals, and some small hand painted touch ups. I modified the way the legs attach behind the intakes by building up a severe angle”wedge” of pla to give it more of a wide angled stance. Hope it works out. Quote
pengbuzz Posted May 30 Posted May 30 12 hours ago, Urashiman said: Ah crap man… that really sucks. I wish I could help you in any way. Thanks; I appreciate it. The situation has improved, as we had to get legal help involved. I did manage to finally find the acrylic spheres I needed. Note to anyone building the 22 inch cutaway: 30mm will be a near precise fit for the nacelles; you just need to give a swipe or two around the inside of the opening on the front of the warp nacelles with an xacto knife. My big problem now is decals for this one; Round 2 is out, and I don't have the money for them anyways. I designed up a set in Photoshop to fit this model; I just need to ask a couple of folks here by PM if they could print it for me (11" x 8.5" ). If they can't, I'll have to check back in. Meantime, I tossed the trillions of pieces that remained of my shuttle. My heart just hurts right now....😭 Quote
Thom Posted May 30 Posted May 30 @pengbuzz Understand the hurt. But, also glad to hear you found the right size spheres for the 22 incher! Huzzah! Quote
Papa Rat Posted May 31 Posted May 31 (edited) The ARII 1/100 VF-1S is ready for action. love this little fella. All these old kits just need a little love and patience. Edited May 31 by Papa Rat Added photo Quote
Gabe Q Posted May 31 Posted May 31 @Papa Rat That old kit looks SOOO good! You really made her shine. Keep up the good work! Quote
nightmareB4macross Posted May 31 Posted May 31 Implementing the sliding heat shield and redefined the chins, yes chinS. Quote
Big s Posted May 31 Posted May 31 12 hours ago, Papa Rat said: The ARII 1/100 VF-1S is ready for action. love this little fella. All these old kits just need a little love and patience. Looks better than mine. The little mods really added a lot to the appearance Quote
Papa Rat Posted May 31 Posted May 31 @Gabe Q @nightmareB4macross @Big s hey, thanks. Monster is next up to bat Quote
derex3592 Posted May 31 Posted May 31 @Papa Rat Man that little oldie turned out really nice! Over here boring ordinance painting for the Strike Eagle 🦅 and Airwolf is coming right along! 😂 Quote
Big s Posted May 31 Posted May 31 2 hours ago, Papa Rat said: @Gabe Q @nightmareB4macross @Big s hey, thanks. Monster is next up to bat I’m really curious to see the Monster. I fell like out of the old school kits that that one may be one of the most challenging due to all the seams and the fit issues. Also to try and keep the lines even between the two halves may require some scribing skills. Quote
Papa Rat Posted May 31 Posted May 31 52 minutes ago, derex3592 said: @Papa Rat Man that little oldie turned out really nice! Over here boring ordinance painting for the Strike Eagle 🦅 and Airwolf is coming right along! 😂 Thanks for the compliment. That Airwolf is not boring at all. Excited to see it when you finish it up. Quote
Big s Posted May 31 Posted May 31 5 hours ago, nightmareB4macross said: Implementing the sliding heat shield and redefined the chins, yes chinS. Looks like this guy is getting way more than a basic makeover. Quote
Rock Posted May 31 Posted May 31 (edited) Taking a break and remodeling the 25 year old PG for the 30th anniversary. Already did the Katoki styling so this one I'm using the HiRM as inspiration. Edited May 31 by Rock Quote
Papa Rat Posted May 31 Posted May 31 5 hours ago, nightmareB4macross said: Implementing the sliding heat shield and redefined the chins, yes chinS. Never skip Chin day. Looking Awesome. Quote
Papa Rat Posted May 31 Posted May 31 1 hour ago, Big s said: I’m really curious to see the Monster. I fell like out of the old school kits that that one may be one of the most challenging due to all the seams and the fit issues. Also to try and keep the lines even between the two halves may require some scribing skills. Yeah I’m going to add ball joints all around the kit and post updates as I dig in. Quote
WiseGuyVic Posted June 1 Posted June 1 @Papa Rat You did such an incredible job on that kit! I've been apprehensive about giving one of those Arii Gerwalk kits a try but I think I might now! Quote
Papa Rat Posted June 1 Posted June 1 (edited) 46 minutes ago, WiseGuyVic said: @Papa Rat You did such an incredible job on that kit! I've been apprehensive about giving one of those Arii Gerwalk kits a try but I think I might now! You totally should! Thanks so much. I’m new to model building and figure these older, affordable kits will be the best route to bust my chops and learn. Nothing to it but to do it. 😊 *Just noticed your handle. Are you one of the WiseGuyHobbies, guys? I only bring it up since I bought that Super and many other kits from WGH off of EBAY. Always a good resource for these old kits. Edited June 1 by Papa Rat Quote
WiseGuyVic Posted June 1 Posted June 1 41 minutes ago, Papa Rat said: You totally should! Thanks so much. I’m new to model building and figure these older, affordable kits will be the best route to bust my chops and learn. Nothing to it but to do it. 😊 *Just noticed your handle. Are you one of the WiseGuyHobbies, guys? I only bring it up since I bought that Super and many other kits from WGH off of EBAY. Always a good resource for these old kits. For a newbie, you'd rock at some of the local shows here in the upper East Coast! Indeed I am! I left some new comments on the GTC Legacy Thread. I have updates I'll be divulging and I'm trying to do more community outreach. Thanks for choosing us! Quote
Papa Rat Posted June 1 Posted June 1 (edited) While the search continues for the right ball joints for my Monster build I did a quick test fit on this Seapig. The Wave, Ma.k. kit went together very well. It’s going to need lots of seam removal but the fit is very precise. When it’s time to come back and work on this, the plan is doing the whole brush painted lacquer thing. Excited to try something new. Edited June 1 by Papa Rat Quote
Papa Rat Posted June 1 Posted June 1 2 minutes ago, Cheese3 said: Next layer, silly putty is the best These bright paint schemes are great! Quote
WiseGuyVic Posted June 1 Posted June 1 @Cheese3 I thought I recognized that Messiah! I was wondering how you got all those wavy lines... noted lol. Quote
Big s Posted June 1 Posted June 1 1 hour ago, Cheese3 said: Next layer, silly putty is the best That’s a bright camo. Looks cool. Quote
Big s Posted June 1 Posted June 1 5 hours ago, Papa Rat said: While the search continues for the right ball joints for my Monster build I did a quick test fit on this Seapig. The Wave, Ma.k. kit went together very well. It’s going to need lots of seam removal but the fit is very precise. When it’s time to come back and work on this, the plan is doing the whole brush painted lacquer thing. Excited to try something new. Those wave Ma.K kits go together fairly easily, even though they have seams here and there. I just wish they could’ve upgraded the joints by now to not be exposed polycaps. Those things really don’t like paint. Also make sure to have some thin wire and a small drill bit for the backs of the feet for those details there Quote
Papa Rat Posted June 1 Posted June 1 1 hour ago, Big s said: Those wave Ma.K kits go together fairly easily, even though they have seams here and there. I just wish they could’ve upgraded the joints by now to not be exposed polycaps. Those things really don’t like paint. Also make sure to have some thin wire and a small drill bit for the backs of the feet for those details there Yeah I’m not sure if I will tackle the polycap parts like you said, paint is not its friend. Also good call on the wire for feet. I totally didn’t realize it’s present in the official art and not the kit. Quote
pengbuzz Posted June 2 Posted June 2 4 hours ago, Big s said: Those wave Ma.K kits go together fairly easily, even though they have seams here and there. I just wish they could’ve upgraded the joints by now to not be exposed polycaps. Those things really don’t like paint. Also make sure to have some thin wire and a small drill bit for the backs of the feet for those details there 2 hours ago, Papa Rat said: Yeah I’m not sure if I will tackle the polycap parts like you said, paint is not its friend. Also good call on the wire for feet. I totally didn’t realize it’s present in the official art and not the kit. A friend of mine used Rit DyeMore dye for synthetics to dye his polycaps a darker color. Maybe that would work? Quote
Big s Posted June 2 Posted June 2 2 hours ago, Papa Rat said: Also good call on the wire for feet. I totally didn’t realize it’s present in the official art and not the kit. I think I just used a little pin vice hand drill and the smallest bit. Then just used some thin wire from bread wrap twit ties. 9 minutes ago, pengbuzz said: A friend of mine used Rit DyeMore dye for synthetics to dye his polycaps a darker color. Maybe that would work? The colors are actually fine, usually just the grey that’s already required, but the polycaps can be a bit shiny and any weathering can easily rub off along with top coats. I’ve seen some people having a bit of luck with vinyl paints and plastidip, but others that tried the same stuff without much luck Quote
pengbuzz Posted June 2 Posted June 2 5 hours ago, Big s said: I think I just used a little pin vice hand drill and the smallest bit. Then just used some thin wire from bread wrap twit ties. The colors are actually fine, usually just the grey that’s already required, but the polycaps can be a bit shiny and any weathering can easily rub off along with top coats. I’ve seen some people having a bit of luck with vinyl paints and plastidip, but others that tried the same stuff without much luck Ah, I see. In that case: try rubbing the outside of the polycaps with #0000 grade steel wool. I used to have to do that for some of my Gundam models back in the day. That should dull them down and lighten them a little. Quote
pengbuzz Posted June 2 Posted June 2 (edited) From my failed Shuttle model: originally, these two figures were the same pose and such. I cut apart one of them, repositioned the arms, legs and head, then built an MMU pack for it. Edited June 2 by pengbuzz Quote
Photogirl Posted June 2 Posted June 2 Just finished my Jetfire conversion. Started out as a yellowed Jetfire. used toyhax labels, waterslides, and some stickers of my own design to fill in what was missing. Wish there were 3D files for the strike canon. Quote
Big s Posted June 2 Posted June 2 1 hour ago, pengbuzz said: From my failed Shuttle model: originally, these two figures were the same pose and such. I cut apart one of them, repositioned the arms, legs and head, then built an MMU pack for it. At least the crew survived Quote
pengbuzz Posted June 2 Posted June 2 (edited) 20 minutes ago, Photogirl said: Just finished my Jetfire conversion. Started out as a yellowed Jetfire. used toyhax labels, waterslides, and some stickers of my own design to fill in what was missing. Wish there were 3D files for the strike canon. Nice job! For the Strike Cannon, try here: https://www.ebay.com/itm/224701195212?mkevt=1&mkcid=1&mkrid=711-53200-19255-0&campid=5338722076&customid=&toolid=10050 Edited June 2 by pengbuzz Quote
Thom Posted June 2 Posted June 2 Good job on that @Photogirl! Looks fire! As @Big s says @pengbuzz at least the crew is alive and, judging by the guy on the left, enjoying the close call! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.