Jump to content

Paper Monster


J A Dare

Recommended Posts

Hey MW gang,

I've received requests for the paper monster kit. Found the files on my old hard drive. Below is a link to the zipped files. I also included finished examples.

Paper Monster Kit w/ Manual

http://dare.to/sandbox/papermonster.zip

Paper Monster finished pics (not mine, from old MW posts)

http://dare.to/sandbox/papermonster_examples.zip

Have fun!

Jason

Link to comment
Share on other sites

what type of paper is best?

I used 90lb card stock. Worked fine for the scale I built it. I printed mine as large as it could be on 8.5x11 in paper which came out to about HO scale (1/89ish). Some of the large areas needed to be reenforced by adding a second layer. If you want to make it larger, you might want to use a heavier stock.

Link to comment
Share on other sites

I put this together already. Here's my advice on building this:

1) Use 110# card stock paper. this makes for a solid paper monster that you can actually play with if you wish.

2)If you can, print it from a Color Laserjet, not a cheap color printer. Trust me, it's better.

3)If you have photoshop or a similar program, create a page of just the green color and print that on the backside of the printed pages. No white will show in exposed areas.

4)Don't use scissors to cut it. Use a good exacto knife and a ruler. And also, fold with the ruler.

5)Use elmers white glue. Not too many options there, but that stuff just works.

6)Have lots of patience. This thing takes forever to put together right. But when it's done, it looks awesome and it's big. I have friends that still look at it at amazement cause it's all paper. Any questions? :D

Link to comment
Share on other sites

I put this together already. Here's my advice on building this:

1) Use 110# card stock paper. this makes for a solid paper monster that you can actually play with if you wish.

2)If you can, print it from a Color Laserjet, not a cheap color printer. Trust me, it's better.

3)If you have photoshop or a similar program, create a page of just the green color and print that on the backside of the printed pages. No white will show in exposed areas.

4)Don't use scissors to cut it. Use a good exacto knife and a ruler. And also, fold with the ruler.

5)Use elmers white glue. Not too many options there, but that stuff just works.

6)Have lots of patience. This thing takes forever to put together right. But when it's done, it looks awesome and it's big. I have friends that still look at it at amazement cause it's all paper. Any questions? :D

show me the pictures!

Link to comment
Share on other sites

I put this together already. Here's my advice on building this:

1) Use 110# card stock paper. this makes for a solid paper monster that you can actually play with if you wish.

2)If you can, print it from a Color Laserjet, not a cheap color printer. Trust me, it's better.

3)If you have photoshop or a similar program, create a page of just the green color and print that on the backside of the printed pages. No white will show in exposed areas.

4)Don't use scissors to cut it. Use a good exacto knife and a ruler. And also, fold with the ruler.

5)Use elmers white glue. Not too many options there, but that stuff just works.

6)Have lots of patience. This thing takes forever to put together right. But when it's done, it looks awesome and it's big. I have friends that still look at it at amazement cause it's all paper. Any questions? :D

Jasonc, I'm filing your post for future reference when I actually have the time to build it.

Thanks!

Link to comment
Share on other sites

Jasonc, I'm filing your post for future reference when I actually have the time to build it.

Thanks!

That's cool. I hope all that helps. The 110# cardstock is the best. It's probably the hardest paper that will come out of a printer. But I will submit pics of it tonight.

Link to comment
Share on other sites

As you can see, mine has white spots on the folds, but with a green or black marker, these can go away. I tried this and it works, but once I was finished, I was so happy, I never finished the marker touch ups.

any tips on them evil round parts?

already screwed mine up

I used a roller pin for that. It's extremely challenging, but will do the job.

Link to comment
Share on other sites

any tips on them evil round parts?

already screwed mine up :(

Which evil round parts are you talking about? If you're talking about the barrels, try rubbing the sheet over the corner of a table to give it some bend. Then, you may want to try using a wooden dowel for support while you glue the barrel closed. Also, don't try glueing all the tabs in the barrels at once. Take it one or two tabs at a time.

Does that help, or are you asking about a different part?

Link to comment
Share on other sites

BTW, I made a B/W paper monster about a year and a half ago. I didn't feel like wasting all the color toner, but I also wanted something a little different.

Here's the thread with the pics and some tips: The Link

Edited by Mule
Link to comment
Share on other sites

any tips on them evil round parts?

already screwed mine up :(

Which evil round parts are you talking about? If you're talking about the barrels, try rubbing the sheet over the corner of a table to give it some bend. Then, you may want to try using a wooden dowel for support while you glue the barrel closed. Also, don't try glueing all the tabs in the barrels at once. Take it one or two tabs at a time.

Does that help, or are you asking about a different part?

it helps, was talking about that circular knee piece. should stop gluing all them tabs first ;)

*drool* low viz

Link to comment
Share on other sites

Yup, fold down all the tabs as flat as possible, close the "lid" of the round part, then glue the tabs from the inside and fold them back up to stick to the inside of the part. (if that makes sense, speaking in generalities since I made this one a long time ago)

Link to comment
Share on other sites

  • 4 weeks later...
  • 2 weeks later...

Has anyone seen this software? http://www.tamasoft.co.jp/pepakura-en/

it allows you to take 3DS models and import them to make papercraft models...

if anyone has a 3DS model of a YF-19 or VF-11 they could email me I would appreciate it...:D

in the meantime..there are a couple robots on the main page to download S032.jpg

edit**

I just read that it accepts DXF files as well....!!

Edited by akura2
Link to comment
Share on other sites

Guys, could someone please update the link to the Paper Monster Download? I get a 404 error when I click on it. I desperatly want that model too :)

Link to comment
Share on other sites

A long time ago I started cleaning up the .pdf files but I stopped. I've started up again, and this time I'm also going to add some weathering and shading. Once I'm done I'm going to offer 3 versions:

1) The unshaded version.

2) The shaded, weathered version.

3) The shaded, weather version in layers so that users can create their own color schemes.

Here's a sample of the original and the "optimized". Pardon the file size.

post-3-1115342829_thumb.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...