Urashiman
-
Posts
630 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Posts posted by Urashiman
-
-
Tadaa
in the mail today…
-
Super nice man!
-
2 hours ago, pengbuzz said:
Nice, implement it everywhere
-
@Thom & @MechTech Thanks a lot!
Did some sanding and glueing during my lunch break today.
I love miliput - so much better than the revell stuff.
Clamps ... Clamps everywhere!
I found a good use for these old empty tape rolls I have flying around in a box.
Much sanding needed to get rid of the seems on the VF-1, but less than actually expected. Watching that kit review video on youtube basically gave me nightmares on possible gaps. If using clamps to get everything fit together well, I only had to sand down the seams. No putty needed. Here a comparision of the left and right engine nacelle/leg.
On the upper one, basically no seam to be seen after mild sanding. Have to carve some panel lines back on though
-
5 hours ago, Big s said:
The Arii kits unfortunately were far easier to find at my local hobby shops when I was younger
big grabbers on those boxes. The imai kits were more of a rarity for me before Bandai rereleased them
My first VF-1 was Arii as well, with a little beach suit minmay as well
-
6 hours ago, pengbuzz said:
Okay, I read your post quick and saw "paypal account"; didn't see the "charity" part!
So, I looked up paypal charity account, and apparently you have to be an actual charity to open one (as in register)!
Last I checked, "pengbuzz model fund" isn't a 501(c) organization!
So I guess that's going nowhere!
Thanks though, Urashamin!
Check this: https://www.paypal.com/buttons/
-
2 hours ago, Goodman Models said:
I have both sets, they are different. I can scan the has decals and you could try printing your own?
Yeah, that was the idea
-
@pengbuzz well, you know what to do
More plamax VF-1 stuff. I should open a new thread for the VF-1, as a build log or something
It‘s putty time!
some more color on the cockpit.
only let down on the kit so far? The decision to make the wings attached by single pylons. Once you close the main body, you don’t get to take them off for painting. So a hack is needed (which I borrowed from that other thread). C-clamp
And of course, sloppy painting on the pilot.
mhmm… can’t wait to finally finish it.
-
-
1 hour ago, wm cheng said:
I might take you up on your offer @derex3592!!! In fact I have shot a mini-gun with blanks back when I was on "Bulletproof Monk" art department - all I remember was it was so heavy I just didn't want to drop it, but there was no recoil/kickback with the blanks at all, it just sounded like a really loud wail/fart, you couldn't make out the individual rounds. I always thought being an armourer would be such a cool job!
Damn you @Urashiman - you're making me want to buy one of these plamax kits... (I have too many unbuilt kits in my stash already!!!)
No worries about your stash… mine is 2m in height and 80cm wide. Many kits that wait to be build and I basically LIFO‘ed the Plamax VF-1. XD
-
Hey, so- if anyone ever wondered what will happen if extra thin tamiya cement spills on your cutting mat, let me tell you, something bad. Please try to avoid it.
I have been building more on the F-14D and the Plamax VF-1.
the leg definitely are bulkier on this one compared to the Hasegawa VF-1.
the whole appearance looking bulkier as well, being a bit more true to the original Kawamori sketches than the sleek and thin Hasegawa VF-1.
The canopy is more bubbly than Hasegawas. I really like this kit now
-
looks like someone is going extra already and is scratch building super packs for the VF-171.
-
Little progress on the VF-1.
Airbrushed the cockpit stuff.
Also fixed the burping on my VF-22, and sprayed the gears of the F-14D partly
As you can see in the above picture I had some fun with my 3D prints. Checking how color sticks to the prints. Let‘s see how that works out for me.
-
some tweet on people building the VF-171
-
@MechTech & @wm cheng Basically, there is less detail on the Plamax VF-1 compared to the Hasegawa one, but the Plamax one stays true to the master file line art. The Hasegawa VF-1 has a bit more added detail (not in the official line art) like the small little holes on the panel lines to emulate screw/bolt holes. I like that Plamax made sure to give the RCS on the VF-1 more depth. I wonder: when bandai had the 1/72 VF-1 already, would people complain why there would have to be a Hasegawa 1/72 VF-1? The Hasegawa mold is over 20 years old by now and Plamax is introducing new technique to their mold.
@wm cheng I dunno about your experience with real life guns, but let me explain a bit. A mint gun or rifle looks really fresh. No scratches, no chipped off color, no rubbed off plastic. Over time, the gun black would start to rub and chip off on edges and corners, as well as the spaces where a soldier would put down their hands often. The plastic parts are usually molded in the color they have on the battlefield and are not painted. Plastic starts to "polish" the more it is used. I remember my army rifle which was in service since 1964, and was really worn out. The handhold was really glossy as well as the grip. The trigger was basically rubbed blank, no more gun black on it. The hinge to reload was rubbed blank as well. The nozzle was matte, and edges were chipped off. The mag eject button was super rubbed off and polished. In ALIENS I think they used the fresh out of the box look, as the rifles where supposed to be super new. What kinda annoys me about all the customs and recreations online is, that the color on the handle and the mag holder of the M41a are always super chipped and worn out, showing metal beneath, where obiously the piece is supposed to be made out of plastic. It looks fancy but is not accurate to the movie. Yours has a mostly clean look, which I like, and kinda warhammer 40k like highlights
@derex3592 & @pengbuzz I feel you ... how often did I spill lacquer color or solvents, or managed to break an almost ready wing for an RC plane and would just leave the room, to not throw a temper tantrum and smash it all to smithereens...
@MechTech I wonder - will that ship eventually float and be RC controlled?
Edit: ah man ... it sounds like I am super mean again. Sorry - that is not intended
-
Okay, here is some stuff for the hase vs plamax thing. Unfortunately I only had the spare parts from the ve-1 left over and a mint vt-1. so here, grey parts are hase, black and white are plamax.
The VE-1 was a first issue kit, meaning it wasn’t produced with the now worn out vf-1 molds. The hase vf-1 is a bit thinner on the walls and details are really fine. The plamax vf-1 has really thick walls and the details are feeling deeper and broader.
Sizes of the nose and mainbody are matching. The cockpit interior varies. The Hasegawa cockpit is smaller. The plamax pilot won’t fit into it.
A giant!
I started priming on the cockpit parts today.
and - behold! I continued my F-14D. Love it, airbrushing with my „new“ airbrush goes so much easier now.
-
I couldn't hold myself back. I started building the new Plamax 1/72 VF-1A/S...
First impression:
The kit goes together nicely. What I like is that it is not trying to fight hasegawa, but doing it's own thing. I've build many hasegawa VF-1s since 2002 and the Plamax defo feels way different during build up. It is a nice refresh, and I like the details to it. Even being a bit more expensive than the Hasegawa one, this one really is worth it. I'd recommend it.
If you expect something that is snap-fit here, it is not. The piece go together properly, but are not tight fit.
First thing here: Black runner and colored instructions.
One plus over the Hasegawa VF-1? The little dude here that comes with the kit. No need to purchase a weapons upgrade kit
Second: from here on, no glue was incorporated. Everything is just "snapped together" (really losely).
Just a small comparision to my failed VF-1P nose print. I am glad the dimension of my VF-1 nose fit, which makes me happy a bit, knowing I am on a good way with the VF-1P. Notice the bend outwards walls of the 3D printed nose, around the cockpit area.
This is how far I got. I repeat: no glue used except for the pilot, the seat and the control panel in the cockpit.
Edit:
I'll go to my basement later and grab a Hasegawa VF-1 kit to compare some of the parts.
-
7 hours ago, Goodman Models said:
Happy to help out, looking forward to seeing you're build!
-Anth
Yeah - gonna start today. Uhm - do you still have the kit out? Because the chinese re-print I have has bad jpeg artifacts on the minmay ...
Just have a look :S
-
16 hours ago, Bolt said:
Isn't Hlj doing 25% off shipping.?
even with the 25% off, it was EUR 26.something for shipping. The fun part: EMS was 26.something and the cheaper surface mail without tracking was 25.something. So I went with EMS.
-
8 hours ago, Goodman Models said:
I scanned them at 1200 dpi. You'll have to stitch them together. Hope this helps!
-Anth
807747818_2009MinmaySpecial1.pdf 11.19 MB · 4 downloads 1594336171_2009MinmaySpecial2.pdf 11.48 MB · 3 downloads
Oh man! That is so awesome! Thanks a lot! How can I ever repay you for that?
-
26 minutes ago, Thom said:
Frak! It will cost me 80 to 90 bucks to buy/ship!
same for me... but I don't care.
-
4 hours ago, Goodman Models said:
Ok, I dug them out. Did you want a scan of the decals as well? I'll do the scanning tomorrow after work.
Hey! I have the decals already, so only need a scan of instructions for the decals. Thanks a lot man!
-
Pictures of box content and instructions as usual on 1999.co.jp.
https://www.1999.co.jp/10916567
The instructions are straight forward. The pilot made from 5 pieces is a bit crazy though hahaha
-
First VF-171s are charged by HLJ today! Happy building!
*
Wave 1/72 vf-171
in Model kits
Posted
There you go