AlphaHX Posted January 26, 2006 Author Share Posted January 26, 2006 welcome back! 364034[/snapback] Thanx! Link to comment Share on other sites More sharing options...
Sdf-1 Posted January 27, 2006 Share Posted January 27, 2006 I assume it will take some time until it's time to pay for this, especially when I'm almost the last one on the list? I just have to think now what other stuff I can order... It might be hard to give any estimated time for this, but I believe it will not be that soon. Link to comment Share on other sites More sharing options...
mslz22 Posted January 27, 2006 Share Posted January 27, 2006 I assume it will take some time until it's time to pay for this, especially when I'm almost the last one on the list? I just have to think now what other stuff I can order... It might be hard to give any estimated time for this, but I believe it will not be that soon. 364817[/snapback] I am not sure that everyone will be able to pay all at once so anyones place in line is really dependent on when they can pay, some people that are first on the interest list may not be able to pay right away.... I've made a few more molds, and i've been detailing the main body a little bit at a time all week. the panel lines do not really show up with my crappy camera but i will try to get some pics up over the weekend. My goal right now is to have my kit cast up and start on the instructions in 2 weeks, crossing my fingers that my schedule will allow... mike Link to comment Share on other sites More sharing options...
Sdf-1 Posted January 27, 2006 Share Posted January 27, 2006 Thanks for the info Mike Link to comment Share on other sites More sharing options...
HWR MKII Posted January 27, 2006 Share Posted January 27, 2006 Mike if the casting on this is as good as your X-wing i will be very pleased. I would like to add that this X went together smoothly. I had NO warp in my fuselage sections. 1 Question though. What kind of Mold Release Agent do you use? i have used dawn, formula 409 and even cillit BANG and the stuff wont come off. The paint keeps lifting off the resin. any help would be great Link to comment Share on other sites More sharing options...
Less than Super Ostrich Posted January 27, 2006 Share Posted January 27, 2006 Yep... I had to gently sand the main fuselage and wings. No damage to the details, though. It is still the best resin kit I've ever bought. Link to comment Share on other sites More sharing options...
mslz22 Posted January 27, 2006 Share Posted January 27, 2006 Mike if the casting on this is as good as your X-wing i will be very pleased. I would like to add that this X went together smoothly. I had NO warp in my fuselage sections. 1 Question though. What kind of Mold Release Agent do you use? i have used dawn, formula 409 and even cillit BANG and the stuff wont come off. The paint keeps lifting off the resin. any help would be great 364841[/snapback] I don't use any mold release, just baby powder....i would suspect that it may be a problem with either one of the things that you tried to clean it with, the type of primer that you used, type of paint, or the tape. if you go into more detail i may be able to help you more..... mike Link to comment Share on other sites More sharing options...
mslz22 Posted January 27, 2006 Share Posted January 27, 2006 (edited) Like i said you can't see the panel lines but they are there....2 of the 3 arm parts have been molded and cast (only 1 shown)....... Edited January 27, 2006 by mslz22 Link to comment Share on other sites More sharing options...
HWR MKII Posted January 27, 2006 Share Posted January 27, 2006 I think it was the primer not wanting to adhere to the resin itself because i always use a very low tac tape. It isnt doing it all over just in annoying places. im going to let the paint cure for another full 24 hours before i try again. maybe it just hasnt set yet since its so cold here. Link to comment Share on other sites More sharing options...
nightmareB4macross Posted January 27, 2006 Share Posted January 27, 2006 I think it was the primer not wanting to adhere to the resin itself because i always use a very low tac tape. It isnt doing it all over just in annoying places. im going to let the paint cure for another full 24 hours before i try again. maybe it just hasnt set yet since its so cold here. 364860[/snapback] Have you tried a self etching primer? It's usually found at most auto parts retailers. Link to comment Share on other sites More sharing options...
mslz22 Posted February 5, 2006 Share Posted February 5, 2006 Just got word from Devin that the sample decal sheet will be on it's way to me in a couple of days Link to comment Share on other sites More sharing options...
Sdf-1 Posted February 5, 2006 Share Posted February 5, 2006 Cool Btw, any more pics of the kit..? Link to comment Share on other sites More sharing options...
mslz22 Posted February 6, 2006 Share Posted February 6, 2006 Like the pics above, alot of the little adjustments and the panel lines are just not showing up on my camera so there is just not a lot new to see right now, once i have cast parts i think the panel lines and details will show up much better, i can even do a light wash on some primered parts to make them show up, also once i get the remaining leg parts molded and cast i can start building up from the feet and give everyone a better idea of the size etc..... mike Link to comment Share on other sites More sharing options...
HWR MKII Posted February 6, 2006 Share Posted February 6, 2006 If the decals for this are the usual quality devin puts out then noone will be disappointed. I got a set off of him a coulpe months back for my 1/48 UD strike valk. the sheet was so comprehensive i am still putting them on. Link to comment Share on other sites More sharing options...
Viceland Posted February 6, 2006 Share Posted February 6, 2006 SNIP. IÂ got a set off of him a coulpe months back for my 1/48 UD strike valk. the sheet was so comprehensive i am still putting them on. 367084[/snapback] Is it better than the original Club-M (or recast) decal sheet? or is it different markings? Link to comment Share on other sites More sharing options...
HWR MKII Posted February 6, 2006 Share Posted February 6, 2006 He basically adapted the hasegawa sheet to the 1/48 model and added a few more markings for details Link to comment Share on other sites More sharing options...
Viceland Posted February 6, 2006 Share Posted February 6, 2006 He basically adapted the hasegawa sheet to the 1/48 model and added a few more markings for details 367112[/snapback] So in your opinion, which is better? Link to comment Share on other sites More sharing options...
HWR MKII Posted February 6, 2006 Share Posted February 6, 2006 Devins by a long mile. They are crisp and clear and all the colors are in register. Link to comment Share on other sites More sharing options...
Kylwell Posted February 6, 2006 Share Posted February 6, 2006 Devins by a long mile. They are crisp and clear and all the colors are in register. 367118[/snapback] So....were can one order one of these decal sheets? Link to comment Share on other sites More sharing options...
HWR MKII Posted February 6, 2006 Share Posted February 6, 2006 contact devin. Link to comment Share on other sites More sharing options...
Viceland Posted February 6, 2006 Share Posted February 6, 2006 contact devin. 367267[/snapback] I just did! Ok, everyone back to the Monster... 1, 2, 3, aaaaaaaaaand DROOL!! Link to comment Share on other sites More sharing options...
mslz22 Posted February 6, 2006 Share Posted February 6, 2006 Yes, back to our regular scheduled program I am pouring some more molds today...well right now i am drinking a mug rootbeer, but when i am done with it i will be finishing up pouring molds for some more cannon parts and the cockpit. mike Link to comment Share on other sites More sharing options...
Viceland Posted February 6, 2006 Share Posted February 6, 2006 Yes, back to our regular scheduled program  I am pouring some more molds today...well right now i am drinking a mug rootbeer, but when i am done with it i will be finishing up pouring molds for some more cannon parts and the cockpit.mike 367401[/snapback] So if your molds end up a brownish colour, with some fizzing bubbles and a sweet root smell, you'll know why! Link to comment Share on other sites More sharing options...
Myersjessee Posted February 9, 2006 Share Posted February 9, 2006 Gorgeous Mike...simply gorgeous! Link to comment Share on other sites More sharing options...
mslz22 Posted February 9, 2006 Share Posted February 9, 2006 Thanks Jesse...lots of molds brewing so not a lot of time to actually cast stuff but here is the biggest part of the 8 part cannon... Link to comment Share on other sites More sharing options...
Sdf-1 Posted February 9, 2006 Share Posted February 9, 2006 Ahhh... Not exactly a macro-pic though. Link to comment Share on other sites More sharing options...
mslz22 Posted February 9, 2006 Share Posted February 9, 2006 Ahhh...  Not exactly a macro-pic though. 368431[/snapback] Alright..alright....with parts in the molds and only 2 hands this is the best "macro" shot i can get..yes it's blurry, and the parts are only sloppily held together but you can get a better idea of the size........ mike Link to comment Share on other sites More sharing options...
Kylwell Posted February 9, 2006 Share Posted February 9, 2006 Oh My Gawd frell me Link to comment Share on other sites More sharing options...
Sdf-1 Posted February 9, 2006 Share Posted February 9, 2006 (edited) Sgwqreijsdalna!?#¤=?" Edited February 9, 2006 by Sdf-1 Link to comment Share on other sites More sharing options...
big F Posted February 9, 2006 Share Posted February 9, 2006 Well if thats a 1/1 scale human arm the monster is big. Small dog sized I think. Link to comment Share on other sites More sharing options...
nightmareB4macross Posted February 9, 2006 Share Posted February 9, 2006 Careful, Mike. I don't think the Monster appreciates you putting your hand up there. Link to comment Share on other sites More sharing options...
Kylwell Posted February 9, 2006 Share Posted February 9, 2006 Now cough.... Link to comment Share on other sites More sharing options...
Sdf-1 Posted February 9, 2006 Share Posted February 9, 2006 That monster will propably eat our dog... Hehee, I wanna walk that thing out to poo Link to comment Share on other sites More sharing options...
mslz22 Posted February 9, 2006 Share Posted February 9, 2006 Careful, Mike.I don't think the Monster appreciates you putting your hand up there. 368492[/snapback] No monsters were harmed in the making of this film Just got the sample sheet from Devin, they look good Link to comment Share on other sites More sharing options...
nightmareB4macross Posted February 9, 2006 Share Posted February 9, 2006 How much more is needed to complete the artist proof? Link to comment Share on other sites More sharing options...
Recommended Posts