MechTech

@arbit Oh oh, do we have a combo set coming out soon?😁 @pengbuzz Looks JUST like a movie I saw once! For those of you who would like to see last weekend's PennCon (IPMS Central Pennsylvania model show), here's the photos. I'm leaving them full size since many have a lot of models in them. I limited the amount of photos I took. Most are sci-fi, because that's what we do! Background info. This is not a 1st, 2nd, 3rd place judging. Models are judged by medals, bronze, silver or gold. You can have multiple gold kits in the same category. You'll see some models have medals next to them. I happened to take the photos after they were laid out. The gold medals were handed out at the end in person. I couldn't believe how many gold medals our club took home to include best in class and best of show (it was a '53 Chevy fully "plumbed" with wires and fuzzy seats details). I've got construction photos of my frigate, but I don't wanna hog the boards now (even though I may already have)😎 - MT

@electric indigo Looks much better in the light! - MT

@Thom It's hard to tell whether your mods are part of the kit or not. Looking cool! @electric indigo Great finish as always! It looks ready to make a run. I think you got the weathering just right too. @arbit Roy's "girl" looks cold and angry. 😁 Great sculpts as usual! Especially the last set. They are in a very convincing pose. @pengbuzz You TOTALLY breathed new life into that old kit! Even whittling out a Cosmo zero! All the details you added and kit fixes you made really bring it up to a whole new level! Even the base looks great! The "wood" deck effect also makes it look a world better than stock. Moving that gun turret REALLY fixed the profile of it too. Congrats on adding a new model to your collection. The flooding may have taken some away, but your collection will be built back up again. And I think with some even better builds! If you guys are interested, I caught a ride to the PennCon IPMS model show. I can share some of the photos if you guys are interested. - MT

Hasegawa milks molds BETTER than any model company out there! It's not just the Macross kits either. You gotta give them that. Just two missiles and a new decal sheet - whole new model kit! 😉 - MT

@ChristopherB You guys did an AWESOME job on the case! Just put that "Cure" album on and you can have a full flashback in time!😎 The LED lights look great in there too. It's great that they have no IR to yellow the plastic with. Nice and clean too. - MT

That sucks that the plastic is so brittle with time. Your improvements look great though!!! - MT

I like it! Nice amount of weathering and the clear sensors in the nose look great. - MT

He he, why does that look like an album cover?😁 Arbit's getting the band back together! Is is just me, or does cannon fodder on the far right need more hair? He looks more 90's than 80's 😎 They all look awesome though! - MT

@pengbuzz Man, I haven't heard that song since the 80's on the Dr. Dimento show! That is good news about the apartment. At least it will be freshly painted. Hang in there! - MT

@pengbuzz I'm SO SORRY to hear that happened! Law is not my specialty, but I believe Sanity is Optional is correct. It's usually your lawyers going after theirs. Another issue may be valuing things. Models are hard to do that with. Other items are easier. I pray this works out for you! - MT

@arbit That is a SHINY boat! I would NEVER actually put that in the water - to afraid to jack it up on some rocks! I agree with Pengbuzz. In fact, some wood glues are waterproof when set. Nothing likes to stick to that chrome. If you're feeling lucky, you actually can use A LITTLE superglue, but you have to thoroughly clean the area of oils / fingerprints. Also mask the surrounding areas to be careful. At the factory they use something like contact cements, but lots o luck getting that precisely applied. @HWR MKII You're still alive! Good to see you on the boards. - MT

@Thom "Then the Amaterasu is your thing!" That's what I'm talkin' 'bout! @pengbuzz Using the tape to your advantage! Your improvements make that kit look MUCH better! @electric indigo It looks like Zveda is getting better with their molds. The last kit I built from them (A LONG time ago) was ROUGH. - MT

More turrets! More turrets! More turrets!😁 - MT

@Thom Yeah, that's the version I love! You can never have enough turrets or missiles - in my humble opinion! - MT

Thank you guys! I was glad to FINALLY get that done. I think I'm breaking my personal record for models built AND finished in a year. @505thAirborne You need a business card that says "Valk Doctor" on it😁 @Urashiman Your improvements look good and accurate! @electric indigo Great looking finish on the -25. The panel accents give it a nice feel. @derex3592 The work on the Titanic is looking great! The windows look real with the lighting. I don't know what it is, but ammo works great for holding parts while gluing. Its too bad about your cutters. The God Hand cutters are the best from what I've seen. I guess they say cut the parts off with some of the sprue, then clean it off with those. I've found the cleanest cuts are actually SLOWLY cutting the parts, not nipping them quickly. That's the weird part. @pengbuzz Sorry about your hand. You are making some 'UGE changes to that kit! They are vast improvements and looking great! Go crazy, add another gun turret! That stand also adds a richness to it. Classy! - MT

@pengbuzz Ahhh, the good ole' days! My son was complaining about a lot of the anime being on paid platforms so not a lot to see. I gave him the ole speech (grandpa voice), "back in my day we didn't have much anime and we liked it!" @arbit Now you're just showing off putting them together😁 @505thAirborne It looks like you have your work cut out with all the yellowed spots - even on the gray plastic! @Urashiman You're model is looking good. I think EI may be right about the windshield angle. At LONG last, a "simple" model that was supposed to be built for a January contest is finally DONE! It's also not so simple anymore either.😉 To encourage you guys not give up on what you're building (or life), here's a breakdown and a tally of how many times I had to redo stuff: The propeller blades were attempted as solid metal for strength and simplicity. That failed so I had to redo them in steel. Then solder them on to brass discs to fit into the hubs. My plan to blue them with acid failed as the steel had some tin it. So they had to be coated with a Sharpie marker and painted flat to seal them. The propeller hubs were machined several times for several reasons - of course - why not. The canopy had to be redone twice. The first one got bad crazes in it due to bad plastic. In fact, this one has some, but they're staying now! The canopy fit horribly from stock so it took several fillings and sanding to get it relatively smooth. Use the natural rubber masking compounds, they're great and get into all the tiny corners. The bottom shell casing "name plate" had to be decalled and coated four times for various reasons. At least its smooth now. Then four times to glue it to the base cleanly with silicone rubber. Somebody said the hole in the spinner would look cool with a cannon in it. I agreed. One Saturday, two drill bits later and several wasted pieces, the tiny 3/16" long part was done! I'll spare you all the details of the two gear boxes. That's tooooo long of a story... So, having a problem with a project? - DON'T GIVE UP! And now, here she is, the Mk 25 Turbo Spitfire Lioness - completed. Thanks for checking in guys! - MT

@electric indigo As usual, nice n clean with great surface detail! @arbit Your figures are very realistic, even with anime hair! If I need figures for a project, I know WHO I'm going too.. @Thom The shipyard is looking busy these days. Your stingray is really coming along great. @Chas It's great seeing a Phoenix here. I love your model. I LOVED that show growing up too. I actually built a very big and rough version out of wood scraps when I was a kid. I'm sure it was VERY rough looking too! Imagine a kid trying to "fly" around about 30lbs of wood model. All my "missions" were short and on the ground.🤣 - MT

Dude! I can see my house from here!😁 That city looks awesome in there! This is turning into a museum piece! - MT

Those mods an additional updates look REALLY cool! - MT

GREAT mechanical modifications! That's also a nice-n-clean paint job too! She looks ready to start an intergalactic war all over again! - MT

@pengbuzz I'm glad to hear you're healing up! It's frustrating when your hands are out of commission! That also sucks about your local hobby shop too! We had one here once until he closed too! @Thom Your mods are looking really good and clean. @derex3592 You'll be busting a scale bottle of champagne on that hull soon! She's looking good! - MT

I'm sorry about the clogged can! Even more sorry about your hands! I empathize with you. Sometimes its good to just rest up. I hope you feel better REALLY soon! - MT

The cockpit canopy looks cool on that version! - MT

@pengbuzz That stinks; I hate it when that happens. You can try soaking the nozzle and the can opening with thinner /lacquer thinner. Maybe another can's nozzle? If that doesn't work, then definitely try soaking the can opening in thinner or solvent of some kind. I hope that helps. - MT

Hey Derex, rattle can. It comes out perfect every time! It's never gotten a rough finish and always lays down smooth. I also shake it for THREE minutes to ensure a good mix. - MT