Rodavan Posted February 20, 2016 Posted February 20, 2016 (edited) Had a lighting strike that took out my server and electrical equipment late December 2015 - after the restore , I found an old file where I started a VF-0 so I have restarted this week with front body and Gunpod Edited February 20, 2016 by Rodavan
Mr March Posted February 21, 2016 Posted February 21, 2016 Looking good so far. I have a little more uncolored line art (in better scans and resolution) featured on my website post-update. Might be a little more helpful than before. Make sure to check it out if you need the reference.
Rodavan Posted February 23, 2016 Author Posted February 23, 2016 Thx Mr March - had a look and i will use info there I finalized the general shape of the gunpod now I need to add detail ....
Rodavan Posted March 5, 2016 Author Posted March 5, 2016 Thx guys Thought I add some progress pics , it's going very slow .I just getting all the basic shape, sizes and position right for now
Rodavan Posted April 4, 2016 Author Posted April 4, 2016 I have been constructing the cutting lines , so each panel can then be cut from the solid model - I get asked about NURBS modeling a lot , so here is some detail of how the lines look and then how it is used. Old school Will post the finished "leg" that is filleted next ....
3D-Brainx Posted April 4, 2016 Posted April 4, 2016 Well hello detail! That looks realy good. What soft are you using?
Rodavan Posted April 4, 2016 Author Posted April 4, 2016 Thx 3D-Brianx - CAD Rhino3d , Render - Cinema 4D or Blender (still learning)
grigolosi Posted April 4, 2016 Posted April 4, 2016 Damn I would hate to have to remove a few of those panels along the front intake in real life. It looks like you would have to take off that entire upper fuselage cover to get to the upper screws. Excellent work though I like the screw details you included.
Rodavan Posted April 20, 2016 Author Posted April 20, 2016 I need some advise I am looking at the front "cut"out , there is not good detail on this - am i going the right way or is this wrong?
Rodavan Posted May 15, 2016 Author Posted May 15, 2016 Thanks Zinjo Started modeling again - detailing's is a pain , I added the "foot" and did some work there . Slow going ...
Rodavan Posted November 11, 2016 Author Posted November 11, 2016 Been a while - real life very hectic , but I created solid model from nurbs an d carving out the shape to add fillets and detail later
3D-Brainx Posted November 13, 2016 Posted November 13, 2016 That looks amazing. Is it going to transform?
Rodavan Posted November 20, 2016 Author Posted November 20, 2016 Thx 3D-Brainx , The model should ,but it is a CAD model so when you converted it to poly's it becomes a very big file Small bit of progress again ....
Rodavan Posted November 30, 2016 Author Posted November 30, 2016 (edited) Does anybody have more or better information/pictures on the VF-0 cockpit layout , I have these Edited December 2, 2016 by Rodavan
Rodavan Posted December 8, 2016 Author Posted December 8, 2016 Some progress on back piece that sit between the legs
Rodavan Posted January 15, 2017 Author Posted January 15, 2017 Small Update - slow going on front panels
Gabe Q Posted January 17, 2017 Posted January 17, 2017 It looks amazing so far! Looking forward to the rest!
Rodavan Posted January 21, 2017 Author Posted January 21, 2017 Thank you Gabe Q . I need to finish the head before I can do bottom so I will start with that . After some response from the modeling section I think I will go " official" head ..... let's see where the model leads me
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now