MasterOfPuppets Posted December 8, 2006 Share Posted December 8, 2006 (edited) So I wanna tighten up my 1/60 VF-0S limbs, mainly the arms. But I don't know how to go about this without accidently breaking the thing. I tried pulling the arms off the ball joints but they didn't seem to budge. So what's the best way to tackle this? Edited December 8, 2006 by MasterOfPuppets Quote Link to comment Share on other sites More sharing options...
kensei Posted December 8, 2006 Share Posted December 8, 2006 The elbows and the shoulders can be done separately. I gotta save this, I've typed it heaps of times already in VF-0 topics. You have to find the line on the white armour that encompasses the Zero's bicep. They are glued so you have to crack them off. There you will find a screw to undo and then you can tackle the joint with wood glue or something. With the shoulders, the shoulder armour has to be taken off first. You can find the screws at the rear of the armour. Take that apart, and then you will see a ball joint, which has another screw through it. Take that apart and do what you will. Quote Link to comment Share on other sites More sharing options...
one_klump Posted December 13, 2006 Share Posted December 13, 2006 I added a layer of superglue to the ball part of the joint, then tightened it up again. works fine now. Quote Link to comment Share on other sites More sharing options...
kensei Posted December 13, 2006 Share Posted December 13, 2006 Yeah, but remember when the glue dries, you have to move the joint again, and glue that dries and holds too strongly could crack the joint. Quote Link to comment Share on other sites More sharing options...
one_klump Posted December 19, 2006 Share Posted December 19, 2006 Right, but I put the superglue on the ball part of the joint in a layer of decent thickness, let it dry, then re-assembled the joint. Worked great, but itseems to have loosened up again Quote Link to comment Share on other sites More sharing options...
Wicked Ace Posted December 19, 2006 Share Posted December 19, 2006 I gotta save this, I've typed it heaps of times already in VF-0 topics. Maybe this should be a dedicated "what's wrong with my VF-0" thread. The big "what's wrong with my _____" thread is a little overwhelming. Quote Link to comment Share on other sites More sharing options...
Lonely Soldier Boy Posted December 21, 2006 Share Posted December 21, 2006 My VF-0S arms are decently tight, what I can't get over of is the lack of feet lock. Can someone think on a way to modify this? Quote Link to comment Share on other sites More sharing options...
MasterOfPuppets Posted December 23, 2006 Author Share Posted December 23, 2006 Maybe this should be a dedicated "what's wrong with my VF-0" thread. The big "what's wrong with my _____" thread is a little overwhelming. If someone can change the thread title then I don't see why not since I need some more help. Upon reassembly of the shoulder section of my VF-0S I went about putting the screw back in. But oh no! I did it to tight and a crack formed. Looks like pretty nasty crack too. At first I kinda ignored it and just put the shoulder cover back on. Transformed it into fighter mode. Then transformed it back. After 1 transform it hasn't broken into a seperate piece yet so there may still be hope. After that transform I took off the shoulder cover and haven't touched it since. So what should I do? Just put some glue over the crack? What's some really strong glue and where can I get it? Here're some pics. [attachmentid=39215][attachmentid=39216] Quote Link to comment Share on other sites More sharing options...
nightmareB4macross Posted December 23, 2006 Share Posted December 23, 2006 If someone can change the thread title then I don't see why not since I need some more help. Upon reassembly of the shoulder section of my VF-0S I went about putting the screw back in. But oh no! I did it to tight and a crack formed. Looks like pretty nasty crack too. At first I kinda ignored it and just put the shoulder cover back on. Transformed it into fighter mode. Then transformed it back. After 1 transform it hasn't broken into a seperate piece yet so there may still be hope. After that transform I took off the shoulder cover and haven't touched it since. So what should I do? Just put some glue over the crack? What's some really strong glue and where can I get it? Here're some pics. [attachmentid=39215][attachmentid=39216] You know after seeing all these broken shoulders I am really considering recasting these parts in a really strong resin. While I am not sure of what the long term effects are. I am sure it would be better than having a VF-0 with a broken arm. If there is enough interest I could reproduce the parts using an unbroken arm. I could attempt to reinforce it somehow so it wont be as easy to break and might be able to retaina a small rubber washer inside that can keep the arm somewhat tight. Quote Link to comment Share on other sites More sharing options...
MasterOfPuppets Posted December 23, 2006 Author Share Posted December 23, 2006 (edited) You know after seeing all these broken shoulders I am really considering recasting these parts in a really strong resin. While I am not sure of what the long term effects are. I am sure it would be better than having a VF-0 with a broken arm. If there is enough interest I could reproduce the parts using an unbroken arm. I could attempt to reinforce it somehow so it wont be as easy to break and might be able to retaina a small rubber washer inside that can keep the arm somewhat tight. Man that would be a lifesaver. Perhaps a thread to create interest should be made? I'd grab a set in a heart beat. But to replace the shoulder piece I'd have to get the bicep armor off right? And they're glued together correct? Either way, I still need a fix for it. Any suggestions would be appreciated. Edited December 23, 2006 by MasterOfPuppets Quote Link to comment Share on other sites More sharing options...
Fly4victory Posted December 23, 2006 Share Posted December 23, 2006 (edited) Please make replacement shoulder joints for the Zero's. I would order three sets. Edit: Molded in color? Edited December 23, 2006 by Fly4victory Quote Link to comment Share on other sites More sharing options...
Valkyrie addict Posted December 24, 2006 Share Posted December 24, 2006 I thought this was a problem in the VF-0A, I see the S are having it too... gonna have to be extra careful with mine now, better leave it in fighter mode, looks better anyway Quote Link to comment Share on other sites More sharing options...
Magnus Posted December 25, 2006 Share Posted December 25, 2006 Oh god, please please PLEASE make a set of resin parts!! I just bought a VF-0A for xmas and the arm broke on the first transformation. I'd buy these in a second. You would save Christmas for me if you did! Quote Link to comment Share on other sites More sharing options...
nightmareB4macross Posted December 25, 2006 Share Posted December 25, 2006 This is turning into an epidemic. If I am to reproduce these, I need broken limbs from an original VF-0A, A only. I would have to use the parts to thicken and enhance the old design. The reason, I ask for "A" limbs is that I would like to reproduce these as they have the screw holes, as do the bicep covers. If there is anyone out there who can help to get this project one step further please contact me via PM. I would require both halves of the upper left and right arms, as well as, both halves of the left and right bicep covers. I will do my best with this project and try to obtain a very close to original color match. Thanks, NB4M Quote Link to comment Share on other sites More sharing options...
KiriK Posted December 31, 2006 Share Posted December 31, 2006 Hey NMB4M.... i may be able to provide you your limbs for the recast project... my arms just broke.... pics are in this thread Quote Link to comment Share on other sites More sharing options...
VF-19 Posted December 31, 2006 Share Posted December 31, 2006 If the shoulders are made of ABS plastic, you may be able to use hobby glue to glue it back together. Most hobby glues, while ment for polystyrene, will work on ABS, and it'll work very well too. Just read the packaging. Alternatively, you could use the glue that's used to glue abs pipes together (it will say on the packaging in the plumbing department). Quote Link to comment Share on other sites More sharing options...
eugimon Posted December 31, 2006 Share Posted December 31, 2006 If the shoulders are made of ABS plastic, you may be able to use hobby glue to glue it back together. Most hobby glues, while ment for polystyrene, will work on ABS, and it'll work very well too. Just read the packaging. Alternatively, you could use the glue that's used to glue abs pipes together (it will say on the packaging in the plumbing department). you should be careful when using cements... they tend to melt the plastic to bond it and on such a thin piece like the shoulders, you may permanently deform the part. Quote Link to comment Share on other sites More sharing options...
VF-19 Posted December 31, 2006 Share Posted December 31, 2006 you should be careful when using cements... they tend to melt the plastic to bond it and on such a thin piece like the shoulders, you may permanently deform the part. True, that is a major "catch". However, if done right, you should be able to get it back together with no problems! Quote Link to comment Share on other sites More sharing options...
nightmareB4macross Posted December 31, 2006 Share Posted December 31, 2006 True, that is a major "catch". However, if done right, you should be able to get it back together with no problems! Also don't forget to give it plenty of drying time. You don't want to stretch parts out of their original proportions. Quote Link to comment Share on other sites More sharing options...
VF-19 Posted January 1, 2007 Share Posted January 1, 2007 Also don't forget to give it plenty of drying time. You don't want to stretch parts out of their original proportions. Actually, if you use the glue sparingly, it'll be about 90% dry in about 1 hour. If you cover the part in the glue, then you'll want to wait much much longer. When I'm doing repairs with my Yammies that involve glue of any sort, I give it a minimum of 24 hours. Although, it's not uncommon for me to come back to the toy about a week later. Quote Link to comment Share on other sites More sharing options...
eugimon Posted January 1, 2007 Share Posted January 1, 2007 Actually, if you use the glue sparingly, it'll be about 90% dry in about 1 hour. If you cover the part in the glue, then you'll want to wait much much longer. When I'm doing repairs with my Yammies that involve glue of any sort, I give it a minimum of 24 hours. Although, it's not uncommon for me to come back to the toy about a week later. I agree with you, cement gives you the best bond... it's just if you've never worked with it before, you could get yourself in trouble fast. Quote Link to comment Share on other sites More sharing options...
Lonely Soldier Boy Posted January 23, 2007 Share Posted January 23, 2007 Hey, NMBM, what are the news about the replacememt shoulders? I just checked my 0S and saw an incipient stress mark on the right shoulder. Besides, I just ordered a Shin and I doubt Yamato fixed the problem, so I'd go with two sets for starters. Quote Link to comment Share on other sites More sharing options...
nightmareB4macross Posted January 23, 2007 Share Posted January 23, 2007 Hey, NMBM, what are the news about the replacememt shoulders? I just checked my 0S and saw an incipient stress mark on the right shoulder. Besides, I just ordered a Shin and I doubt Yamato fixed the problem, so I'd go with two sets for starters. Still waiting for warmer weather. The parts are set and ready to create the molds. My material is pretty cold and not as viscous as it should be. I've tried two other pours and they came out terrible. Come on, warmer days! Come on! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.