Stands comparable to yetistands

[rsvictor1976]

5 hours ago, Morgen Black said:

@rsvictor1976 The bases are definitely quite stable.  I have many other DX VF-1s on Archi Pro stands in much higher angle of banks, but most of them are utilizing the larger arm.  The one pictured could be angled much higher and the DX VF-1 would have no problem staying attached to the mount.  That specific setup is extremely tame versus what you can do with the Archi Pro stands.

MB

Does it actually look better with the longer arms? I would of thought the short arm was the best height for it in fighter mode.

[Morgen Black]

2 hours ago, rsvictor1976 said:

Does it actually look better with the longer arms? I would of thought the short arm was the best height for it in fighter mode.

I am displaying my DX VF-1s in multiple ModuSpace monos, so the footprint is fairly large per shelf.  I use the larger arms based on the type of pose that I want, of course it is up to the individual.  Here is an example of the large arm on the ArchiPro Stand and this is not near the limit of the stand.

MB

[Radioguy]

[Sandman]

Great deal!

[rsvictor1976]

I pulled the trigger and picked them all up. 

Edited November 28, 2025 by rsvictor1976

[BroTaku79]

Promo extended until Cyber Monday 12/01/2025!

Don't miss out!

Thank you all for your continued support!

[eyesonme78]

Sharing self build stand ,not sure if this is right place.

[grogall]

@BroTaku79 are you going to make a black version of the Roy Focker stand?

[BroTaku79]

12 hours ago, grogall said:

@BroTaku79 are you going to make a black version of the Roy Focker stand?

TBH, we will not be making any special stands going forward.

I am just being transparent as both myself, and the designer/supplier, we both lost a lot of money on the regular skull squad stuff.

We do this for passion, and while we do make small profit, our margins are so small to cover a massive loss, so it is a big threat to keeping the doors open.

Until we both normalize, special stuff is out of the question.

Hope you understand.

Thank you.

 

[rsvictor1976]

15 hours ago, BroTaku79 said:

TBH, we will not be making any special stands going forward.

I am just being transparent as both myself, and the designer/supplier, we both lost a lot of money on the regular skull squad stuff.

We do this for passion, and while we do make small profit, our margins are so small to cover a massive loss, so it is a big threat to keeping the doors open.

Until we both normalize, special stuff is out of the question.

Hope you understand.

Thank you.

 

Sorry to hear you’ve taken a loss for this. I appreciate the work you’ve put into the stands. I hope you made some money on the U.N. Spacey stands. I thought they were a hit and sold out really quick.

Edited December 20, 2025 by rsvictor1976

[sh9000]

@BroTaku79 Thank you for all the great products you've made available.

[Radioguy]

On 12/19/2025 at 6:41 PM, BroTaku79 said:

TBH, we will not be making any special stands going forward.

I am just being transparent as both myself, and the designer/supplier, we both lost a lot of money on the regular skull squad stuff.

We do this for passion, and while we do make small profit, our margins are so small to cover a massive loss, so it is a big threat to keeping the doors open.

Until we both normalize, special stuff is out of the question.

Hope you understand.

Thank you.

 

We can understand this. Customizing a product you make is not too much to ask for the buyer to do. Thank you for what efforts you did make, though.

All I really want are official adapters available for sale for the Arcadia SDF-1 (thanks for the 3D print download up until recently), as well as ThreeZero, and KitzConcept valks. Those adapters are really the only glaring things missing from your selection. All your standard releases are perfect unto themselves, and which I promote to all I see looking for stands.

If anything, if you branched out to adding adapters for non-mecha items like cradles for things like Bandai SH Figuarts or SH Monsterarts figures, I'd buy even more stands as those have equally poor included options, if any. I'd frankly love to have a Monsterarts King Ghidorah in a flying pose on a Archi stand. 🤩

[BroTaku79]

23 hours ago, Radioguy said:

We can understand this. Customizing a product you make is not too much to ask for the buyer to do. Thank you for what efforts you did make, though.

All I really want are official adapters available for sale for the Arcadia SDF-1 (thanks for the 3D print download up until recently), as well as ThreeZero, and KitzConcept valks. Those adapters are really the only glaring things missing from your selection. All your standard releases are perfect unto themselves, and which I promote to all I see looking for stands.

If anything, if you branched out to adding adapters for non-mecha items like cradles for things like Bandai SH Figuarts or SH Monsterarts figures, I'd buy even more stands as those have equally poor included options, if any. I'd frankly love to have a Monsterarts King Ghidorah in a flying pose on a Archi stand. 🤩

Thank you for kind words!

I do have the threezero adapters in stock, but I just haven't found the time to upload them yet.

SDF-1 may be down the road, but we have no plans for kitzconcept line ups.

I will do my best to make those threezero adapters/promotions available before Christmas!

[BroTaku79]

On 12/20/2025 at 6:53 AM, sh9000 said:

@BroTaku79 Thank you for all the great products you've made available.

Thank you for your support!

[BroTaku79]

On 12/19/2025 at 11:39 PM, rsvictor1976 said:

Sorry to hear you’ve taken a loss for this. I appreciate the work you’ve put into the stands. I hope you made some money on the U.N. Spacey stands. I thought they were a hit and sold out really quick.

I appreciate it Vic! 

 

[rsvictor1976]

8 hours ago, BroTaku79 said:

Thank you for kind words!

I do have the threezero adapters in stock, but I just haven't found the time to upload them yet.

SDF-1 may be down the road, but we have no plans for kitzconcept line ups.

I will do my best to make those threezero adapters/promotions available before Christmas!

Damn, I thought I was done spending money this Christmas.

[Morgen Black]

8 hours ago, rsvictor1976 said:

Damn, I thought I was done spending money this Christmas.

Dang it, I thought I had already spent what I needed at GokinPlus for the year.  Bring on the ThreeZero adapters.

MB

[rice_1204]

just setup my first gokinplus stand. Great work @BroTaku79! Also can't wait for the ThreeZero adapters

[BroTaku79]

Threezero VF-1 Series combo adapter is now available!

Limited QTY available right now so please visit the link below.

https://gokinplus.com/products/threezero-combo-adapter-for-macross

Holiday sale is available for 10% off on orders of $99 or more until 12/28/2025.

 

Happy Holidays to you all!  Thank you.

[rice_1204]

47 minutes ago, BroTaku79 said:

Threezero VF-1 Series combo adapter is now available!

Limited QTY available right now so please visit the link below.

https://gokinplus.com/products/threezero-combo-adapter-for-macross

Holiday sale is available for 10% off on orders of $99 or more until 12/28/2025.

 

Happy Holidays to you all!  Thank you.

awesome. order placed! Happy holidays!

[rice_1204]

In support of @BroTaku79, gotta post the new threezero adapters just received today. Thanks again for the awesome stands!!! I'm pretty sure the last pic is an unsupported configuration, lol

 

 

 

 

[rsvictor1976]

12 hours ago, rice_1204 said:

In support of @BroTaku79, gotta post the new threezero adapters just received today. Thanks again for the awesome stands!!! I'm pretty sure the last pic is an unsupported configuration, lol

 

 

 

 

That looks really nice. In the first picture, do you have the the Valkyrie attached to the stand or is it just kneeling down on the base? Also, have you tried to bank the ThreeZero Valkyrie in fighter mode using the GoKin angle adapter?

[rice_1204]

15 minutes ago, rsvictor1976 said:

That looks really nice. In the first picture, do you have the the Valkyrie attached to the stand or is it just kneeling down on the base? Also, have you tried to bank the ThreeZero Valkyrie in fighter mode using the GoKin angle adapter?

Yeah, the stands are well made; very happy with them! All the components are high quality materials from the acrylic to the hardware. If anything, a minor suggestion for improvement would be to include knurled fasteners for tool-less setup, but that would likely push the costs too high and limit poseability, so I understand why quick release/knurled fasteners aren't included.  

The first photo is just sitting on the base. I guess the threezero stand might be able to also support the kneeling setup while suspended in the air? I'd have to try it out to know for sure.

I did try some banking setups with the threezero in fighter. It can do at least a 20* bank, but i didn't have time to try more than that. I'll try to get more photos up later. If you have any specific things you'd like to see, let me know and I'll try em out.