Jump to content

Recommended Posts

What a surprise! Rabidlydog actually already arrived when I got home from work. So how was it? Very nice, but not without flaws.

The purple color is perfect, with a light sand grey airbrush sprayed all over, making the purple plastic with a soft light tone. Weathering is not bad, in quality similar to DMZ-01. However, the soft sand airbrush is all over all purple panels, making it very prone to scratches. It even came with some right out of the box, and really is quite unavoidable especially after some handling. Its quite a bit heavier than DMZ-01, partly due to the diecast claws and the slightly bigger size. No loose head dome or loose visor. While almost all joints are tight, the hips are looser compare to DMZ-01. Not real bad, but it made the figure harder to stand straight without holding the gun on the right hand because the claw on the left is weighing the figure down towards the left. When holding the gun, its much more balanced. The attachment of the backpack is also loose, making the backpack pops off quite often. You can add a piece of foam tape on the connection to give it more friction and stay more snug. The backpack is especially fun though. Awesome land mine dropping gimmick with retracting panels while you open or close the drop hatch. Buttons work well to trigger the drop. Though the reload hatch is harder to open without worrying scratching some paint with your nails. And the backpack swing joint lock for the down form is super tight. I almost thought I broke the thing when I finally got it swing all the way up. The claw is fun too, heavy and spring loaded, while the 'thumb' can be retracted to pop out the little cannon. The Chirico figure on the other hand is not so great. Same (sucky) microman body, but the helmet with clear visor wasn't executed very well on mine. Can barely see the eyes, and no painted blue hair inside where there is supposed to. Even worse, the Chirico head without helmet looks like a retard. The eyes were printed way too low on the face. Sad that this is supposed to be an improved version 2 Chirico. My version 1 actually looks better.

Here are some of my main gripes:

- Slightly loose hips & heavy claw made the figure somewhat harder to balance.

- Gun handle too small for the trigger hand to hold the gun securely. It wobbles a bit, even if you manage to keep the fingers from falling.

- Backpack hinge lock way too tight when you want to do down form.

- And here is the most disappointing one... They completely sealed the screw holes on the feet, making it almost impossible to take it apart without breaking something. Why? To stuff a whole bunch of coins to add weight to the feet, as well as tighten the loose ankle swivel joint that all DMZ has. This really hurts the playability of this figure as the added metal weight can let it do very extreme gliding poses, now not being able to do this simple mod like I did with DMZ-01. I managed to yank out the toes with a skinny screw driver without breaking it, while stuff as many dimes in there as I could (18 dimes each feet), sealed them with some kneaded eraser, then popped them back in. But the back of the feet is still hallow, so the effect is definitely not as good as my attempt on DMZ-01, which I basically filled the entire feet with dimes and pennies. This Rabidlydog definitely has fewer loose joints than my DMZ-01, but the way they tried to seal off some parts makes it harder, if not impossible to get those loose bit fixed, which is quite unfortunate. With the slightly unbalanced weight issue it has, it needs this mod even more than DMZ-01. Sigh...

Overall, still very happy with it, aside the sealed feet. The dog is great, with same level of execution as previous DMZs, while fixed some of the past issues. Chirico is more disappointing, but at least you get a new helmet. Especially when HLJ has it for 30% off, its definitely a great buy. (Still can't figure out why HLJ dropped the price of a new release like that).

Edited by mpchi
Link to comment
Share on other sites

wat!!! so soon?? mine was just shipped today from HLJ.... :)

drapped the price maybe because bandai released their model kit too??? maybe....

its very competitive because of some etched and metal parts..i saw the pics and its really poseable.. and it can stand upsidedown on its hans without any support..

too bad im not skilled at model kits esp painting.. hehehehh..

Link to comment
Share on other sites

While not an ideal mod on the feet, with only added weight on the toes, it still helped on pulling some signature Votoms poses. It can lean pretty good as you can see. The weight of the claw did help on counter balancing in that pose. Imagine when both feet is fully stuffed!

IMG_4218.jpg

IMG_4220.jpg

IMG_4221.jpg

IMG_4222.jpg

IMG_4223.jpg

IMG_4230.jpg

As for the other fixes, I just left the backpack hinge lock unlocked. While it leaves a wide gap on the top of the backpack, it doesn't look bad. In terms of the hand, I did my usual super glue trick to thicken the finger pegs. Now they are pretty secure without being permanantly glued. While some foam tape are added on both sides of the gun handle. Now it even has soft cushy grip for Rabidly's comfort :p LOL. Now its pretty snug.

IMG_4234.jpg

IMG_4238.jpg

P.S. Real toy look more purple than these pics.

Edited by mpchi
Link to comment
Share on other sites

that kits is nice but the problem is i dun have the skills to paint one.... :)

Same here. But that kit is really impressive for those that have skills. Bandai really did a great job. While the sculpt at certain area is not exactly how I like it, but its level of detail, with the price its asking for, is pretty much the best package I've seen, as long as you love the modeling part.

Link to comment
Share on other sites

Stole this pic from ToysDaily. Looks like Fyana is coming soon, and will come with an open helmet and extra head for Chirico. Rock!

::EDIT::

excuse the dual images, I'm a dolt and don't know how to remove one of them.

post-430-1185417850_thumb.jpg

post-430-1185417872_thumb.jpg

Edited by eriku
Link to comment
Share on other sites

Guess thats the up-side on the Yamatos. While not as playable, they got kickass pilot figures. Takara's microman looks like crap in comparison.

Yeah, I've played with the Yamato Chirico figure countless times since I got it (so many cool poses), and the actual Scopedog maybe twice. The 'Dog has the "wow, that's big" factor going for it but other than that I just don't enjoy messing around with it. I've had a lot more fun with the Takara 1/18, which is to me is a perfect blend of sculpt, build, deco and scale. I've even enjoy the 1/48 Burglarydog more than the Yamato, which is like the size of the Yamato's hand. :D

Edited by eriku
Link to comment
Share on other sites

  • 4 weeks later...

Can't wait to pick up a Fyana for my BD... and when the Yamato RS set comes out, that'll bring my 1/12 'Dog collection up to 4... kinda scary. The 1/18 Rabidlydog looks great and I'm still debating getting it as well... it might make a good friend for the 1/18 Turbo Custom when it comes out (I cannot wait!)

The new 1/20 models look amazing as well and I cannot wait for more releases... I've got the Scopedog with metal extras sitting at home and the new BD on its way from hlj... they are gorgeous kits.

And wow... that link you posted has some amazing deals on the Yamato dogs... I'm especially impressed that they can offer the Red Shoulder dog for so little when it is limited to *200* pieces worldwide :lol: I should grab another.

EDIT2... crap... I should actually pick up that Melquia armed forces dog for 70 bucks...

Edited by promethuem5
Link to comment
Share on other sites

I just grabbed the purple Melquia forces 'Dog and another Red Shoulder... both for less than the MSRP of one Scopey... it's been a good day :D

EDIT: and I'm debating grabbing a Strong Bracchus and another RS so I can do the two pit-fighters, but I'm more a military guy than a gladiator guy, so I can live without.

Edited by promethuem5
Link to comment
Share on other sites

According to the new Hobby mags, the Takara DMZ #05 Scopedog Turbo Custom has been delayed until December. New photos in the mags show it will come will an all new Chirico figure wearing the OVA green military uniform and beret.

Will get the pics scanned tomorrow.

Hoping to pick up my Vanilla + RSC parts set today.

Graham

Link to comment
Share on other sites

Sweet. I'm in no rush to get it, and the Chirico figure sounds rad. I'm trying to figure out how I'm gonna manage to display 5 Yamato Scopedogs... actually, 6 once the RSC comes out. Gah...

EDIT: Just looked on HLJ and What the hell is this?? That's the best way to get one of the 1/12 pilot figures I've seen... totally unfair.

Edited by promethuem5
Link to comment
Share on other sites

Just picked up the Takara 1/18 Vanilla + RSC Parts set during my lunch break, for HK$299 (US$38.34) from the Animate Branch in Sugar Street, Causeway Bay.

Won't have time to open the box until I get home at about 11pm tonight though. :(

Graham

Link to comment
Share on other sites

Here's a scan from the new October issue of Dengeki Hobby magazine of the upcoming DMZ # 05, 1/18 scale OVA Scopedog Turbo Custom with new Chirico figure.

Not sure when the exact release date is now, as Dengeki Hobby say December, but Hobby Japan magazines says November!?

Graham

post-11-1188264770_thumb.jpg

Link to comment
Share on other sites

Ahhhh.... give us some pics! Please?

I'll try to take some tonight.

The 1/18 RSC set looks really cool fitted on DMZ #01, even better than the magazine pics.

The only difficulty I had was getting the backpack locked in place..........it's a super tight fit. I had to push so hard, I thought I was going to break off the attachment hooks on the back of the Scopedog! Now I'm scared to try to remove it.

Graham

Link to comment
Share on other sites

Yeah, finally the poseable hands becomes a regular accessory. I love the idea of having this variation of Chirico. But can't say I am excited about the face sculpt. From what I get from Rabidlydog, the Chirico face is pretty jacked up. And this new one don't look any better. Hope the beret is removeable, then I can use my less jacked up older version Chirico head.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...