GutsAndCasca Posted April 8, 2006 Share Posted April 8, 2006 I want to convert a 1/48 VF into a Minmay Guard. What I want to know, is should I airbrush the entire valk white, or just strip the paint off where it needs to be stripped off? If someone can help, please let me know! ---Bri Quote Link to comment Share on other sites More sharing options...
Chas Posted April 9, 2006 Share Posted April 9, 2006 Well I've never worked on toys (ABS), I'm a model guy, but I would think it is better to strip the enitre thing and start from scratch. Otherwise you will run into the problem of matching the colour and finish of the Factory that produced the toy, not an easy task for a beginner (or anyone I'd imagine). Before you do any stripping make sure you have the stickers/decals you will need for the project, as well as the paint of course! and you might want to consult someone (Kurt?) about how/which parts need to be disassembled, 'cus I don't think you need to take it completely apart to paint it - just the main sub assemblies. But as I said I'm a model guy and I don't even have a 1/48 so I'm not sure about that last part. Quote Link to comment Share on other sites More sharing options...
David Hingtgen Posted April 9, 2006 Share Posted April 9, 2006 Despite what people might think, black and white are among the hardest colors to match. Paint it all. Or strip it all. Don't have 2 different whites on it. Quote Link to comment Share on other sites More sharing options...
GutsAndCasca Posted April 9, 2006 Author Share Posted April 9, 2006 Thank you much! Quote Link to comment Share on other sites More sharing options...
promethuem5 Posted April 9, 2006 Share Posted April 9, 2006 I am going to be doing one soon myself, and I asked Kurt about it, and he said that he stripped off all of the markings. The only problem is that I'm doing mine on a Captain America VF-1D, and my 1D conversion kit is the orange color. Quote Link to comment Share on other sites More sharing options...
Macross73 Posted April 10, 2006 Share Posted April 10, 2006 I am going to be doing one soon myself, and I asked Kurt about it, and he said that he stripped off all of the markings. The only problem is that I'm doing mine on a Captain America VF-1D, and my 1D conversion kit is the orange color. 389317[/snapback] So your making a VF-1D minmei guard? Quote Link to comment Share on other sites More sharing options...
Anasazi37 Posted April 11, 2006 Share Posted April 11, 2006 Full paint strip and full repaint with a good primer if you want to do it right. I've made enough of these to know, but it's a lot of work. You'll want a consistent white or slightly off-white background upon which to put the large format decals. This is most effectively achieved through a good paint job. That is, unless you're a Jedi Master at paint stripping.... Even then, the stock Yamato white can be a little too harsh for the decals, giving the valk a less than "realistic" feel. I want to convert a 1/48 VF into a Minmay Guard. What I want to know, is should I airbrush the entire valk white, or just strip the paint off where it needs to be stripped off? If someone can help, please let me know!---Bri 389025[/snapback] Quote Link to comment Share on other sites More sharing options...
promethuem5 Posted April 11, 2006 Share Posted April 11, 2006 So your making a VF-1D minmei guard? Yes. Moon Act MG.... Quote Link to comment Share on other sites More sharing options...
Dante74 Posted April 11, 2006 Share Posted April 11, 2006 So your making a VF-1D minmei guard? Yes. Moon Act MG.... 389958[/snapback] That should be interesting. Quote Link to comment Share on other sites More sharing options...
Fortress_Maximus Posted April 11, 2006 Share Posted April 11, 2006 Looking forward to pics. Quote Link to comment Share on other sites More sharing options...
MechTech Posted April 11, 2006 Share Posted April 11, 2006 (edited) As was said earlier, it is best to strip the ABS and repaint. A LIGHT sanding to ensure paint adhesion helps. ABS is actaully close to styrene in some areas, obviously more durable. I've found from experience that the light sanding helps. Especially if you're going to pose it differently from time to time. High grit sandpaper should be used. Coarser grades will ruin the texture. That's one difference between the two types of plastics. ABS doesn't sand well unless you wet sand it too by the way. Just my two cents... - MT Edited April 11, 2006 by MechTech Quote Link to comment Share on other sites More sharing options...
GutsAndCasca Posted April 12, 2006 Author Share Posted April 12, 2006 What I once thought was a straight-forward project is fast becoming a complexity withing complexities. I was hoping to finish in a month or less, but this looks like it's going to take more like 6 months. College + wife + kid = not much spare time. Well... my 1st step is going to be converting a VF-1J Hikaru into an MG1. (I have a photo of a Hasegawa VF-1J with MG1 decals and it looks absolutely awesome.) The MG2 with strike armor VF-1S will be my 2nd project, which I'm hoping the MG1 will get me ready for. You know. On 2nd thought, I think I'll make my VERY 1st project just converting a Hikaru VF-1S into a Max. If anyone has suggestions on the best kind of masking tape to use --- please don't hesitate to post! I bought some 99cent store masking tape and used it on painting up one of my kid's GIJoe tanks and the paint totally leaked in a lot of places. ---Bri Quote Link to comment Share on other sites More sharing options...
Chas Posted April 12, 2006 Share Posted April 12, 2006 It may sound dauntinng, but it all that is needed is some simple skills, some practise, and confidence. You might want ask around and see what kinnd of materials folks around here use when working with ABS -(i.e. what kind of paint? what kind of primer? what grits of sandpaper? what to use for clear coating/ etc.). Also try to work out the order inwhich you will be progressing through the project, you might want to write it down. If your not sure just ask the guys here. Once you've done this, then just take it step by step. The secret to this kind of stuff (at least what I've learned from models) is PLAN YOUR WORK THEN WORK YOUR PLAN As before Good Luck! P. S. It's a real good idea to practise on stuff that's not too dear to you while your learning. But you seem to know that already Charles. Quote Link to comment Share on other sites More sharing options...
Kurt Posted April 12, 2006 Share Posted April 12, 2006 I use Tamiya masking tape only. Some people use Tamiya to just mask the edges and then use cheaper tape to fill in the other areas. I just use Tamiya for everything. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.