Knight26

skids down, the reason the mains are so far back is becuase, well that was the only place I could fit them, the area right before them are the missile packs, which are removable, so taht is no place to put the landing gear.

Ok, landing gear are in, with some slight modifications. And yes before anyone asks I do realize that the nose gear skid is too long, I will cut it in half and turn the other half into a door. I still need to add a couple small details, but overall the landing gear are in and done, let me know waht you think.

Man LGs are a pain to design. I had an idea becuase looking at the first concept I realized that in a particularly rough landing they could collapse pretty easily if there is a pressure loss in the system. So I put together the following. Upside it should keepe mains pretty well locked in place, downside, it will take up more interior volume, something I want to try and avoid. The pics from left to right show, fully deployed and locked, deployed, not locked, and retracted. And haterist, the color scheme is temporary and the fighter can be repainted in a number of schemes, and hey even microfig scale is fine, though I admite 1:18 scale would be cool, shakes that off. Just be sure and give credit where it is due, I would lvoe to see what you can come up with, and like I said if it come out well I would be willing to buy a copy.

Haterist if you can make a good rendition of it out of lego, then I will pay you for one, I would love a good physical model of this design.

Preliminary nose gear concept, basically I just swapped around the parts and made a couple small modifications. Of course since I do not have the model on my work computer this is about all I can do until I get it home and install it, rescaling, adding details, etc... ANy comments?

Lube me up Arnold?

Before this gets closed, it should be in the "other" section if anywhere. Also, these books are not out of print, they recently started pushing them back out as compliation pieces. Besides that, transcribing a complete copyright book onto the web like that, I'm not sure that's even legal.

Ok, I cranked this out real fast as a potential landing gear concept for the fighter. I currently have a skid on it, but I may change that to a more claw like landing pad, or on the outside wheels, but that is up for debate. THe skidn will be the easiest as then I do not have to model the doors. ANy thoughts?

Hey all the Pt Mugu Airshow up in Ventura COunty is this weekend, are any other Macrossworlders from SoCal going to be in attendance, especially since Edwards was canceled? Website: http://www.nbvc.navy.mil/airshow04/events.html

Your super power is The psychic ability to communicate with goldfish (only goldfish) The color of your costume is Translucent Your Battle Cry is "NOT THE FACE!" Your side-kick is A robot that has a homosexual crush on you

The show is hilarious when I went to visit my family in July they had in a block party on CN and I watched it with my dad and nephew. My Dad was actually almost in tears at one point he was laughing so hard. My Nephew didn't get that particular joke and I barely got it, there are so many pop culture references in it too, mostly 80's but some older, that even adults can enjoy it. So here were three generations in one family liking the show, and all for different reasons and getting different subtle little jokes throughout it. Of course since my Dad is going deaf he could have just heard something wrong that started him laughing, lol, but he still thought it was "neat" show.

Nice F-14 picture and incidently the pilot lost his wings for that little stunt.

Max Jenius: Sell Out Design, that I do not get, I have always been a fan of FSWs, and other then the slight resemblance to the Hammerhead and Pyro GX it really doesn't look like any other space fighter I can think of. Except for the large number of guns and huge engines, but I would hardly call that selling out. Just so you know I am just curious as to what you mean, and any suggestions you would make to correct the sell-outed-ness of the design. (I can't believe I actually typed sell-outed-ness, lol.) Kin: The only objects that currently hold a texture map other then color are the fins, the wing tip guns, the wing maunvering pods and the cockpit interior. Pretty much all of them but the cockpit textures will be replaced, which ones are you referring to? I will eventually, after all the modelling work is done creature texture maps for it, for individual parts, and they will be large.

Huh, never noticed the Hammerhead resemblence before, but you are right, man I loved SA:AB. Oh and just for the heck of it here is the registry view.

aft dorsal view

Update time: 1) Missile and torpedoes tubes in and walled. 2) Missile Exhaust Vents installed 3) Manuevering Jets are all in: Nose: 14 vertical up, 14 vertical down, 35 lateral (each side) Aft: 22 Vertical up, 22 vertical down, 49 lateral (each side) "Canards (per)": 7 vertical up, 7 vertical down, 8 lateral Wing tip pods: 14 dorsal, 21 ventral Next Up: Will start on the docking mounts tomorrow, and the undercarriage design. Then will do the atm control surfaces. I still think something needs to go on that aft dorsal surface above the engines though, any thoughts?

Interesting toy, never cared much for VOltron though, probably will not get it. I wonder how long until they do vehicle Voltron, heck all I would want from that would be the jet, that was cool.

Very interesting, I wonder what the recovery method would have been for the AN-2.

Interesting, that the VF-84 YF-19 is wearing D-Back colors, hmm I may have to check but I think the current Jolly-Rogers used to be the D-Backs, I guess when VF-84 gets reactivated they will steal the old D-Back colors. Man that would stink.

The movie looks cool from the trailer but I doubt it will do well in the theatre, becuase it does go for a small audience. I also hold out hope sicne Frank Miller is apparently keeping a tight leash on the production. Plus its got Carla Gugino necked, heck yeah, she be a hottie.

Why did you buidl your X-wing with the S-foils open? I mean in the landed configuration they are closed. Also, is it full scale and accurate to the studio models, if so how is the forward visibily out of it?

I may have the original, but I could never opt it.

Update again: Changes: 1) The cockpit is all but finished, I may redo the seats, but am going to progress, and fix any small bugs later. 2) I added the ribs to the intakes of the engines, but that is still up to debate as to whether or not they will be retained. 3) I fixed the energy cannon mounts. 4) I fixed the ventral cruciform tails, they were just floating before. 5) Added a simple color map to the whole thing. No other changes at this time. The design still seems to be missing somthing though, underside is great but something about the top is just bugging me. I'm going to do the missile vents next and then start on the manuevering thrusters. I may add a hump similar to the original's but I am not sure yet, any thoughts? The pictures show two exterior views, and two of the inside of the cockpit, one from the pilot's seat looking down at the HDD and controls, the other from the WSO seat doing the same. You can just see the bottom of the HUD repeater in that picture, I am considering adding a control board back there, but it is cramped as is, and most controls can already be linked into the twin throttles. Besides, the WSOs don't usually use the physically controls.

update time: Changes: 1) The canards went away and were replaced by a new set flanking the cockpit that the energy cannons are now hanging from 2) The tails were rebuilt with new sensor pods and it has taken a cruciform configuration. The Cruciform may or may not stay. 3) The reverse thrust exhausts and associated interior engine hardware has been added. No other mods as yet, To be added: 1) will start back on the cockpit later, finish the interior and start on the exterior. 2) Exhaust vents will be added to the missile tubes 3) The engine interior walls will be built up, I have two ideas for this, as this model fighter uses an advanced 1st gen gravity drive, so the walls of the intake will either be smooth, or ribbed, haven't decided. 4) Will add thruster units across the hull, in the nose, tail, wing tips, dorsal and ventral surfaces, plus flanking thrusters. 5) Undercarriage design up. 6) Overhead docking mounts. 7) Atmospheric control surfaces on the main wings and canards. Panel line the fighter, this will come towards the end. Answers to Questions: The textures are all temporary and are legacy to the old design, they will all be replaced. The cockpit does not need to be popped up, the interior has an SIS system similar to the YF-19's cockpit. I will do renders later showing thing, should look really good when it is done. Keep the C&C coming, I really do appreciate it. I still think the design is missing something, but I cannot put my finger on it, any thoughts?

Ok, made some small changes today, been busy with life. Mostly I worked on the cockpit, cutting out the tub, installing the seats, the SIS walls, the main HDD, still need to add some more to the HDDs. I also have to add the WSO's HDD console and add the canopy controls. I am debating making it a split canopy again, any thoughts? ALso, as per greyryder's suggestion I added some canards. I don;t think these ones will stay, if I keep canards at all, any suggestions? The biggest problem with the canards will be placing them where they will not interfere with the two forward cannons, but like I said they do move independantly of the rest of the fighter, still if locked in place I would like them to have a clear line of fire. The design still seems to be missing something that I just can not put my finger on, anyone have any ideas?