Jump to content

Sanity is Optional

Members
 View Profile  See their activity

  • Posts

    5766

  • Joined

  • Last visited

 Content Type 

Everything posted by Sanity is Optional

  1. Sanity is Optional
    Singing One of these things isn't like the others, One of these things just doesn't belong, Can you tell which thing isn't like the others By the time I finish my song?
  2. Sanity is Optional
    Just uploaded the first pass of parts to shapeways, ends up at $35.88 for a full set of parts made out of white strong/flexible, plus another $10.50 for the metal hinge rods. Looks like using frosted detail will be between $50-$70 depending on ultra or extreme. Acrylic will probably be around $100. [Edit] I've ordered some parts (in various materials) to help figure out the fits and tolerances as well as what materials are suitable.
  3. Sanity is Optional
    It would be nice, but it'll probably be a while, they still haven't even announced a tentative date for the new SV-51s. Plus if they're not going to release the VT-1 and VE-1 then I think they're insane. Btw, if anyone's bummed that they didn't get a chance at the -21, there's 3 up on Yahoo Auctions Japan right now.
  4. Sanity is Optional
    Yeah, Chespest I see one at now is ~25,000 on Yahoo Japan auctions, but I doubt it will sell that low. The other 2 there are starting around 35,000.
  5. Sanity is Optional
    I have the 1/72 for it, and let's be honest. No way in heeeeeeeeelllllllll am I going to manage to get all those decals on straight, and protected, and have them stay on through even a single transformation.
  6. Sanity is Optional
    I'dd be honest, if they made a Deculture/Itasha version of Roid's white Drakken (like this) I would buy the hell out of it.
  7. Sanity is Optional
    Alright, I've got everything separated by parts, all that's left is tweaking the dimensions to adjust the gaps between components. It will be 10 parts as shown above, plus 6 0.5mm/0.02" rods. Should be able to be pre-painted before assembly, excepting the outer shell which will have some seams that need sanding. I haven't yet uploaded anything to Shapeways, so not much of an idea what it'll cost. [edit] One thing to note is that there currently are no tabs holding the doors closed, it just relies on the friction of the steel rods.
  8. Sanity is Optional
    I'm really sad that it's not as popular, it's an entirely new transformation and even appearance compared to previous valkyries. If only it was less of a pain to transform.
  9. Sanity is Optional
    Funny enough, that happened with my VF-1S Messer as well. I'm going to need to start poking them after a week for every order I suppose.
  10. Sanity is Optional
    It was ¥35,000 from Mandarake, only damage I know of is a small chip in one of the black panels on the underside. https://order.mandarake.co.jp/order/detailPage/item?itemCode=1075649964&ref=list Considering how rare it is to even see a YF-21 for sale I jumped on it (at 3am when I got the alert email, lol). [edit] I keep meaning to stop buying figures for a month and get some of your stands instead to use with them, but things like this keep tempting me.
  11. Sanity is Optional
    Yeah, Mirage was probably the best thing about that show, aside from the new Valk designs. Plus both of those figures have nice sculpts.
  12. Sanity is Optional
    Some boxes showed up today. Boxes full of awesome. I blame @Saburo for inciting me to get the Mirage figures.
  13. Sanity is Optional
    I may actually sell my normal version when the Premium ships, since I can't cancel it (through Hobby Search). I just knew they were sold out as I keep a web-alert on the pages for Macross/Arcadia stuff up so I can know when new things are available.
  14. Sanity is Optional
    Not terribly, depending on what you want to be separated out. For the inserts with the missiles, it's both easy and planned (missiles being stand-alone parts that peg in at the base, or as a second monolithic part that attaches from below). For the doors they can be painted and then put into the assembly without issue. For the exterior, it's a simple top/bottom shell design, with the parting line at the midpoint for front/back and at the hole for the hinge rod in the center. I think you ought to be able to paint and then assemble with the exception of the outside shell, which will be relatively easy to mask off.
  15. Sanity is Optional
    Ah, gotcha. Though I am now thinking I want to do some alternate missile inserts, just for fun. I was also planning to make 2 versions of the base one, a 1-piece, and one where the missiles are separate parts (because it's so much easier to paint that way).
  16. Sanity is Optional
    I am unsure how to feel about this.
  17. Sanity is Optional
    You mean the missile diameter as it is now looks too big? I could make an alternate missile tray part with smaller missiles, or a larger number of missiles per door I suppose. Since it's just an insert that's actually relatively easy.
  18. Sanity is Optional
    Those do look pretty good. Arcadia seems to be getting their paint apps down pretty well.
  19. Sanity is Optional
    Do we have a release date yet?
  20. Sanity is Optional
    The problem is the bulge at the end that the blade plugs into, it's actually kinda big, a bit under 1/4".
  21. Sanity is Optional
    I'm thinking a panel to hold it in the alternate side-pod (to replace the drone charger)? I suppose the easiest way would be a clip to let it attach to an ordinance hardpoint.
  22. Sanity is Optional
    If you want to take some measurements, I could try fitting a slot into one of the alternate weapon pods I'm working on.
  23. Sanity is Optional
    Probably because more business, but no more employees.
  24. Sanity is Optional
    Yup, especially with pinstripes and the like that cover 4-5 different parts and are a pain to get the decals all aligned on to start. I don't necessarily hate their decals that are intended for details and markings, but the ones that are for stripes and solid colors don't even match the plastic!
  25. Sanity is Optional
    Got the shafts in, I think I'll be going with a 0.02" shaft, seems quite sturdy and only slightly larger than the initial 0.0156". If you can find a 0.5mm shaft (it'll be steel rather than brass) it's equivalent (0.02"=0.508mm). I'm also working on a version which uses a 1mm shaft, note that the parts will probably not be interchangeable between the two.
×
×
  • Create New...