Jump to content

1/48 mods, who's done what?


do not disturb

Recommended Posts

i was wondering what kind of mods people have done to their 1/48's?

at this point, i'd like to do everything and anything possible to somehow make my valk more unique by adding tweaks and mods, such as hollowed out head lasers(fulcy), adding better details to FPs(hirohawa), or something totally insane like battle damage(kurt).

so what have you done? what are you planning to do? what else can be done? what else should be? etc etc etc. please share. :)

Link to comment
Share on other sites

A little lonely here :p

I for one would like to see someone fix the low-hanging shoulders in fighter mode and recast a new slimmer canopy. Those are the 2 things keeping the 1/48 from being more or less perfect in my eyes. The only way to fix the shoulders would be to make the ball socket able to recess into the shoulders by 2-3 mm. We've already seen someone try to clip off those mystery tabs that support the arms in fighter mode, and look what happened.

We've already got a thread for better hands, that's a third thing.

As for me, I'm too chicken to do anything more than paint touch-ups and glueing pieces of confetti over the 1J eye-piece to get rid of the cyclops effect.

FP4.jpg

Link to comment
Share on other sites

The only things I've done that could be loosely referred to as modifications to any of my 1/48s are drilling the head lasers to simulate the bore of the barrels with a little black paint added also, and to sand down and buff the seam lines on the air intakes/thighs to make them look less toy-like... with the parting lines removed those pieces look a lot better.

Edited by mechaninac
Link to comment
Share on other sites

i started this thread because i want to make one ultimate 1/48 with every mod/tweak possible. even if you haven't done it yourself, even if no ones done it yet, anything cool you can think of to fresh out a valk is appreciated.

so far theres....

hollowed out head lasers

eye piece mod

floppy arm mod

larger exhaust bells

buff out seam lines

magnetically attached FP kit(minus the backpack boosters), WIP

spring loaded arm armor missile launchers, WIP

real poseable hands

retracting pistons for airbrake

fully functional intake covers(highly unlikely but not totally impossible)

hinged nose cone attachment

landing lights

MV lense?(though don't know what MV stands for?)

larger rear tires(thats a weird one but anything can happen)

opening(hinged) leg/chest/engine covers

fiber optic HUD/cockpit(thats a crazy one dude!)

anything else you guys can think of that could pimp out my bird?

Edited by haterist
Link to comment
Share on other sites

I think Wm Cheng has done it, and I did it when mine was like 6 hours old:

Paint the landing light in the nosegear door silver, then use kristal-klear etc to make a lens over it. It's that that big round depression on the forward door that's attached to the strut. It'd be impossible to get the exact effect I want without using like Alclad, but it's not worth the effort on such a small area. If they made super-slim MV lenses that'd definitely be the way to go.

Maybe I can drill into the area to make a recess for a MV lens...

Also, the "Hurin mod" where you shave off a bit of the cockpit well to allow the top and bottom fuselage nose halves to close better, minimizing the diagonal seam gap. Though that one is VERY touchy--the line between "not enough" and "too much so that the gear collapses" is about 2 seconds' worth of sanding.

Link to comment
Share on other sites

Though that one is VERY touchy--the line between "not enough" and "too much so that the gear collapses" is about 2 seconds' worth of sanding.

I did that 2 seconds of 'too much' sanding. But its easily fixed by applying paint on the plastic to thicken it up again. Its a hidden part anyway.

That mod is MANDATORY for all my 1/48s. Ugly bloody gap! Pah!

I would like to modify the rear landing gears to have twin wheels or at least bigger wheels though. Those small little tyres don't look tuff enough to handle the weight.

Edited by Retracting Head Ter Ter
Link to comment
Share on other sites

Yup, I overdid it too on my Milia, and built it back up with clear nail polish. Clear nail polish is the toy/model equivalent of duck tape. I think everyone over-does it, you always want "just a little more" of that gap reduced. It's especially bad on Max and Milia, as they have white stripes there, but the gap-shadow is black. It's less obvious on a Roy etc, as the black stripe hides it some. I also put white paint on the insides and edges, to help---it not only eliminates the red plastic showing of the gap edges, but by thickening it slightly, helps with that last .1mm of gap.

Tires: in real planes, tire size/shape is pretty dependent upon landing surface and method. You can tell carrier-based from land-based F-4's by their tire width. The F-15 has pretty skinny tires, and it's much larger and heavier than a VF-1.

Also, "number of wheels" is rarely influenced by the plane's weight, but the limits of what it's landing on (see above). It's usually purely PSI limits of the concrete, etc. Weight-wise most planes would love to have as few wheels and axles as possible, but a 747 would crack the runway apart if it only had like 10 tires.

Link to comment
Share on other sites

Tires: in real planes, tire size/shape is pretty dependent upon landing surface and method. You can tell carrier-based from land-based F-4's by their tire width. The F-15 has pretty skinny tires, and it's much larger and heavier than a VF-1.

Also, "number of wheels" is rarely influenced by the plane's weight, but the limits of what it's landing on (see above). It's usually purely PSI limits of the concrete, etc. Weight-wise most planes would love to have as few wheels and axles as possible, but a 747 would crack the runway apart if it only had like 10 tires.

I find the 1/48 VF-1 rear tyres to be too small still. The F-15 tyres are still relatively 'bigger' compared to those on the Yamato 1/48.

Link to comment
Share on other sites

I think Wm Cheng has done it, and I did it when mine was like 6 hours old:

Paint the landing light in the nosegear door silver, then use kristal-klear etc to make a lens over it. It's that that big round depression on the forward door that's attached to the strut. It'd be impossible to get the exact effect I want without using like Alclad, but it's not worth the effort on such a small area. If they made super-slim MV lenses that'd definitely be the way to go.

Maybe I can drill into the area to make a recess for a MV lens...

who were you replying to? what feature are you talking about? :huh:

Link to comment
Share on other sites

you'll have to excuse me for being a complete tool, my knowledge of planes is very limited.

i take it its little round depression you're talking about...

[attachmentid=36961]

if this is correct, i know a guy who works with LED's on small scale toys. he should be able to work a fully functional landing light in there with a on/off switch.

a cool little mod and great idea. :)

post-206-1159567835_thumb.jpg

Link to comment
Share on other sites

That's it.

But as for lighting---kinda doubt it. The piece is only 1 or 2mm thick with the nosegear strut right behind it.

its totally possible as hes known for doing the impossible. :)

check out his work...

http://www.brickmodder.net/spacemods.html

i also want to put LED's on the left and right translucent pieces on either leg which shouldn't be too difficult. i wsh there was a good way to do lights for the wings and tailfins but the plastic is way too thin.

Link to comment
Share on other sites

you could be right, i have no idea as of yet?

so far i've asked him to add lights to the following areas...

both legs, the front landing light, the red thing on the top of the strike canon, FP boosters exhausts and whatever else i can come up with.

if anyone has any other suggestions as far as areas to lighting up, please share. :)

BTW, do you have some pics of your work? i'd be very interested in getting some ideas and tips if possible.

Edited by haterist
Link to comment
Share on other sites

I haven't lit up anything on a valk, only model kits. And they all require a base/stand with power supply. I haven't done anything in a small, self-contained unit that could work in a toy.

Basically, I know most all the methods of actually getting LIGHT to somewhere. (I prefer flood lighting and fiberoptics, rarely use LED) But very small power supplies--that I haven't done yet.

Link to comment
Share on other sites

you could be right, i have no idea as of yet?

so far i've asked him to add lights to the following areas...

both legs, the front landing light, the red thing on the top of the strike canon, FP boosters exhausts and whatever else i can come up with.

if anyone has any other suggestions as far as areas to lighting up, please share. :)

BTW, do you have some pics of your work? i'd be very interested in getting some ideas and tips if possible.

If you can fibreoptic up the cockpit displays to look like it appeared in DYRL. That'll be awesome in a dark room.

Link to comment
Share on other sites

One mod that I'd like to try, but most likely never will, would be to add more range of motion to the hips for battroid mode. As it is right now, the tips of the angled intake housing hit the side of the cockpit which limits how wide the legs can spread apart. I thought maybe the angled section of the intake could be hinged so that it would angle allowing the legs to pivot more. Taking it a step further, if the housing was free floating with some kind of spring so it can move and pop back in place, then it could angle when it hits the cockpit or even the back allowing the legs to pivot forward without the use of the ratchet joint below the hip, which IMO while accurate and functional looks ugly. Here's a pic to help illustrate what I'm talking about incase none of that made any sense.

IPB Image

Edited by Crazy Canuck II
Link to comment
Share on other sites

Hey guys,

Try getting some surface mount technology LED's. They're the size of a pencil tip and you can use watch batteries to power them (3v). I'm gonna do a 1/200 valk with them when I finish the Daedalus - someday! You can use hair thein wires and everything! I don't know where to get them. I've taken mine off old busted equipment that people give to me (they know I'll reuse some of the parts).

That Lego site was cool by the way. I'm not into Lego's, but small engineering like that is cool. - MT

Link to comment
Share on other sites

Try searching places that cater to model railroaders. They light everything, and in 1/160(N) and 1/220(Z) scale. www.walthers.com is probably the largest retailer in the world---but beware, their catalog is literally thousands of pages.

Link to comment
Share on other sites

The surface mount LED`s are available in strips from Several of the larger electronic component vendors. in England you can try R.S or C.P.C as they stock them over in the U.S im Sure that you could speak to someone like Radio Shack. As M.T says you can power them from 3v watch batteries and cable them up with single strands of wire taken from electrical cable. In the past I made something that had the strands glued into groves like deep pannel lines that wer painted over the top so you couldnt see them.

Another source could be broken moblie phones as they all use them on the key boards and under the screens although you are limmited to yellow white or green depending on the model and make. Just dont give them too much heat when un soldering them.

Edited by big F
Link to comment
Share on other sites

Great ideas Big F. That's what I was gonna do for the wing tip navigation lights; cut a grove and fill over it. I can't use fiber because the swing wing thin would stress it - at least in my tiny scale. I've got one of those IR remote tanks/games from Konami. I thought hey, it backs up when it fires it's cannon! So I stuck one right into the barrel at the right polarity! Yes it always lights up in reverse on the one side of the tracks, but I can see where I've been better :) - MT

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...