drifand Posted September 24, 2003 Share Posted September 24, 2003 For those who haven't seen the Hasegawa stand, here's a link from HLJ. Definitely NOT accurate, but the design does have some smarts - there's plenty of clearance underneath, even for a FP Valk & gunpod or a VE-1 with everything on. And there's a little "hook" on both support truts to catch the wing for a secure elevated pose. Too bad there's no sideways tilt, and of course, it's a KIT. I doubt it can take a hefty 1/60 Valk safely over a long period of time. Ther other thing is... it seems the Valk will be resting on its wings. No big deal for a lightweight kit, bad stress for a 1/60. As is often the case, Yamato has a POTENTIAL winner in their hands. I do hope Yamato finds a way to improve the bottom clearance so that the 1/48s can take their gunpods along. And most of all, beef up the base of the pivot arm. Hopefully they'll have a means to securely lock the various hinges too. Quote Link to comment Share on other sites More sharing options...
Nitrous Posted September 24, 2003 Share Posted September 24, 2003 Don't like it much, not because of the quality, but the way the valks sits on the arm. Instead of the arm clamping on the valk, it looks like the valk's arm is "sitting" on the display arm. Can see quite obvious that the display arm is not clamping on the valk... <_< Still liked sithlord's display arms better..... it can support the valk while in a mid-transformation pose. That's the coolest pose I have ever seen. B) No way that Yamato's display arm can display a valk on a mid-transformation post... Quote Link to comment Share on other sites More sharing options...
tom64ss Posted September 24, 2003 Share Posted September 24, 2003 Ugh the chunky monkey of display stands. Its very ugly and will probably be overpriced. No thanks. hmm.... good idea. Since you can't use this stand with the gunpod mounted underneath, maybe I'll buy some of these for my chunky monkeys. Quote Link to comment Share on other sites More sharing options...
Angel's Fury Posted September 24, 2003 Share Posted September 24, 2003 (edited) Looks to be the same arm holding both Valks, see the way it engulfs the YF-21?.At least it appears they will make a one size fits all version, and not gank us with sizes for all three sizes of Valk. If they do so, then I'll just to wait for it's release & purchase it. It would be a lot better if they could replicate what TheLoneWolf has shown. Edited September 24, 2003 by Angel's Fury Quote Link to comment Share on other sites More sharing options...
Mr March Posted September 24, 2003 Share Posted September 24, 2003 Here is another great pic of a VF-11 on a launch arm WOW! Where the heck did you get those CGI shots from? ANd is there any wallpaper of those screens? Quote Link to comment Share on other sites More sharing options...
Air Elijah Posted September 25, 2003 Share Posted September 25, 2003 I like it. It looks more in scale with the 1/48. Quote Link to comment Share on other sites More sharing options...
Kamui 777 Posted September 25, 2003 Share Posted September 25, 2003 Eh, I'd buy one or two just for the sake of having something Yamato Macross. Quote Link to comment Share on other sites More sharing options...
Capt Hungry Posted September 25, 2003 Share Posted September 25, 2003 (edited) Here is another great pic of a VF-11 on a launch arm WOW! Where the heck did you get those CGI shots from? ANd is there any wallpaper of those screens? Go here to Ryoutaro's Atelier, and click on the Gallere button. I highly recommend downloading the movie that those shots were taken from. There are also some pictures of the VF-11 in all modes. B) Edited September 25, 2003 by Capt Hungry Quote Link to comment Share on other sites More sharing options...
VF-18S Hornet Posted September 25, 2003 Share Posted September 25, 2003 Too bad a real rendition of the DYRL launcharm is mechanically impossible(i.e. the backpack wouldn't be able to carry the weight and break) these look very nice, but not quite right Too bad no one took out the time to invent a miniture anti-gravity device (Heh, heh) Think of what we could accomplish with it. (You know that this is a joke and I am not being serious, but sounds like a good idea though) Quote Link to comment Share on other sites More sharing options...
Swoosh Posted September 26, 2003 Share Posted September 26, 2003 (edited) Shucks, from the looks of it, in order to mount the 1/48 Valk with Fps, the gunpod has to be removed in order for the entire piece to sit snuggly into the crane assembly itself. Adding to that, im wondering wether the arm piece would be able to withstand the huge weight of the 1/48 with Fps. This sort of motivates me to get the acryllic stands instead of these. Cheaper and affordable. Btw Graham, i just found out that these acryllic stands that sithlord sells are also readily available in Hong Kong, its being sold at a model shop in Wanchai. Cheers Hey recon! It which part of Wanchi? How much are they? I want to get some!! Edited September 26, 2003 by Swoosh Quote Link to comment Share on other sites More sharing options...
Myersjessee Posted September 26, 2003 Share Posted September 26, 2003 THATS AWESOME! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.