Chas

What temperature was the water you tried? I don't have any experience with Florry's, but if the water you added was room temp, I would try the hottest tap water you get at home and see if that helps break down the clumps.

Thanks Greg, you're the main reason it happened @tekering yes the Mechanical arm is part of the kit. I was toying with the idea of making it foldable and actually able to store away inside its compartment, but wasn't sure how much working the old plastic could handle, so I decided to just leave it as intended - an add-on bit. Making painted resin look clear is a tough gig man, I don't know if silver would work any better than white. Maybe try curving the lines on the white to emphasize the domed curvature of the 'canopy', then mask around it and do a few layers of gloss clear? Next up is completing a kit I left unfinished a little while ago. Because Plamax chose to make their VF-1J Kakizaki a 'Japan Only' item I chose to get a 2nd Hikaru 1J to paint up as Max's machine, and do my Max VF-1A in Kakizaki's tan/brown. Base coat just about done. ( white is bare kit plastic).

Calling the Arii Bronco II done. Had a bit of a hiccup at the finish line. The matte coat before the chipping orange peeled on me and when I was wet sanding it down I went through the base coat in some spots. Luckily my base coat was very close to the colour of the plastic, so I was able to just even it out in the most affected areas using thinner to remove the paint and redoing the dot filter on the bare plastic. This worked, but made the finish a little dirtier than I wanted, so I ran with that and made her really weathered. Turned out passable, but much more weathered than I wanted. Added some blast marks to cover up some excessive chipping, and all in all I OK with the final result. Final pics Fighter: Gerwalk: With the mechanical arm extended: Don't think I mentioned it before, but like the legs, that door for the mechanical arm closes with a magnet. Thanks again. Hope you enjoy the pics or this rarely built retro kit.

Work on the Bronco II continues. Base coat, panel lines and decals done. Surprisingly the 42 year old decals held up perfectly after a coat of gloss Mod Podge - 0 breakage! Next it was time to dirty her up a bit. One of my favourite things about anime mecha is the fact that, because they are imagined, there is a lot more freedom in weathering them. Here is a first pass with an oil dot filter. You can see the difference between the fuselage which has the filter and the engines without: And here the engines have been done: Next up some selective paint chipping.Not sure which technique I'll use for that yet. I must not fear. Fear is the mind killer. Fear is the little-death that brings total obliteration.

If they do anything more with Stranger Things I think it will centre on the story around the man in the mineshaft and the origin of that rock, and maybe what happened to Henry between that moment and his becoming Papa's pet.

I don't really use the like feature either, preferring to actually comment. It's not a major concern, it just struck me as odd that there was no way for me to see who had liked posts, and I got curious as to if that was how the software was designed, or an admin. choice and what the reasoning behind it was. Now I know. Thanks all.

🙄 I suppose I just can't understand the mentality of some people 🙄 I mean, honestly . . . Why?

Definite preorder. I figure translators will likely only get better, so even if the translations are problematic now . . .

Oops! wrong thread.

Holly Crap! That's awful.

That makes sense. Hadn't thought about it that way.

I mean I could understand concealing the identity if it were an up/down vote, but what is the down side of a member knowing it was me who liked their post? Or me knowing which members liked a post I made? It just seemes an odd decision to hide this information behind the word 'Somebody' - i.e. 'Somebody liked a post'. Has identifying people who liked a post caused some sort of trouble in the past? Just curious.

Slow and steady wins the race!😉

@tekering That's definitely a unique addition to you collection! Good luck with the restoration. Still working away at the Bronco II conversion. I installed some magnets in the rear bottom of the wing openings and the rear lower claves to hold the legs in place whe in fighter mode, I also added some much needed panel lines to the top surface: And with legs engaged:

I'm guessing a Saturn 5 rocket, specifically The Appolo 11 launch vehicle.

And both the Daedelus and the Prometheus would 10+ meters, so I'm pretty sure they're both out as well.

Wait, the hint says 'it's a 1:48 model' At that scale an SDF-1 model would be 25 Meters long! Somehow I don't thing anyone on these boards is THAT crazy.

Yeah, the trailer is a really dud. It's just a black box, doesn't make me want to know more, it just annoys me, and makes me not care.

Getting closer to completing one leg. Thicker, rounder, more shapely thigh: Whole leg: Still a little bit of putty and sanding to do, but getting closer.

😱 Lovely work, and so clean. I've got a long way to go.

Thanks! Now I'm working on widening the thighs and then I gotta round them off a bit. Love the eye camera detail! And movable no less! Awesome! Did you scratch build that, or was it a lucky find in the spares box?

@derex3592 those are some sleek looking birds! Love that blackbird! and the multi-angle stand - awesome! @tekering Herbie with Bumblebee's license plate - nice easter eggs, and fantastic weathering! That front bumper looks like it's plowed through more than a few zombies. Over here I've managed to work out and complete the mobility mods to one lower leg of the Bronco II. Now I need to replicate it on the other. Here's the original: And modified for transformation and mobility:

Yes you did! I didn't want to mention you by name, in case you wanted to keep that info private, but indeed, it was you, and again, I can't thank you enough. Sooo long ago, but I'm finally getting down to it!