Anasazi37

i need to get superglue out of a screw hole, i got what i could witha pin but there is still some inaise the spiral of the screw so i cant get the screw in, anyone know what can break that up?

You can dissolve super glue using something called Z7 Debonder. I use it all the time. It's available at most hobby stores and probably hardware stores, too. I'm sure they aren't the only company making the stuff, though....

They've got round ones, square ones, flat ones.. all your nozzel needs are there!

http://www.hlj.com/cgi-perl/hljpage.cgi?KBYP-109

http://www.hlj.com/cgi-perl/hljpage.cgi?WAVOP-177

Kotobukiya nozzles work best for 1/55s. As others have pointed out, HLJ stocks a ton of them in different shapes and sizes.

Here you go:

I know the black "RMS-1" and the white "UUM-7" stickers go on the missles, but where do they go specifically? Is there any canon art that shows this?

The Hasegawa Weapons Set application guide shows their exact locations. I'll try to get a scan posted later today.

That yellow stick out slots should not be there. I don't know why Yamato made those little variations to the fast packs

I share your frustration. I had to completely redo those designs for my 1/48 sticker and decal sets. Royal pain in the @ss. Bad move on Yamato's part, especially since the yellow "tabs" are disproportionately small compared to the rest of the armor....

Anybody have a picture of an Angel Birds VF-1 in battriod mode?? I've never seen one.

Here you go.... (and Graham does have a point about the sailor suit--but I still like the valk)

Since it looks like I've missed my chance to purchase #3

I'll be taking orders again in a few weeks. I sell my sets fairly often, just not continuously. It's better for my sanity.

i think WM Cheng used his to do that strike valk of his.

wm cheng indeed used the waterslide decals that I make. It brings tear to my eye to see something that beautiful....*sniff*....If I can make my strike look even half as good as his I'll be happy.

To answer your questions, combined arms:

Yamato "Stock" Stickers - Pro: Easy to apply (peel 'n stick). Con: Tend to fall off after a few years (due to the finish on their valks).

Custom Stickers - Pro: Only slightly less easy to apply (cut, peel, stick). The adhesive on these is a lot stronger and won't peel off nearly so easily. The design work and overall quality on these also tends to be much better. Both Takatoys and I make sets for most valks. Con: They're still stickers, which means that no matter how thin they are they will still stand out a little against the surface of the valk.

Custom Decals - Pro: The designs look painted on and you can't generally tell where the decal ends and the valk begins. For detail nuts (like me and many others here at MW), this is the way to go. If the decals are properly sealed with a good clearcoat, they will last indefinitely. Con: Application is a time cosuming process and you should have at least basic modeling skills.

The Angel Birds valk would not be very hard for Yamato to do. All they would need to do is change the paint job on a white VF-1A. My 1/60 AB custom, which used a Max 1A as a base, wasn't terribly difficult (once I finished the decals):

Changing paint jobs and selling variants of the same valk is nothing new to Yamato (they are masters at it), but I agree with many here who think that it's too much of a "niche market" valk that relies greatly on personal taste (many don't like the color scheme). Not that I wouldn't do backflips if Yamato released one (especially since Hasegawa already has), but I'm not holding my breath....

did someone say MINMAY GUARD????

I would mess up my chunky monkey vf-1a hikaru for a 1/55 minmay conversion any day, if you ever make a 1/55 scale set let me know!

Check out this thread.

And here's a pic of the custom with the rest of my Yamato collection. I'm building a better display case right now, especially since I have 1/60 Minmay Guard and Blue Roses Strike customs on the way....

and you got to hang them down from your celling

Yeah, my girlfriend would just love that. <_< I actually have a Tanmen 1/72 Fanracer kit....

are you going to do a few more to make them fly with beautiful formation?

Tempting. Very tempting. I could make a diorama with the whole squadron in formation (and Hikaru's Fanracer flying up through the middle of them).

Don't mean to kick sand on your work but that purple color isn't right...its suppose to be something of a light blue. This one looks more like something done by the artist K.Takazora but the pattern follows the Hase kit.

The color I used isn't purple, it's blue. The exact same blue Hasegawa used for their kit, actually (I scanned in the decal sheet and replicated it). The lighting in the pictures don't do it justice, nor does the picture of the decal sheet--the blue on the custom is pretty darn close to the "light" blue in the fist picture you posted. I believe that picture is from the box art for the Hasegawa kit. The blue of the decals also matches Tamiya's Flat Blue, which is definitely not purple....

Thanks for posting those pics.

Hey Anasazi, you put the feet on backwards!!

I was wondering if someone was going to notice that mistake. I fixed it shortly after taking the pics in battroid mode. If you look at the pics in fighter mode the feet are oriented properly.

those hip intake decals must have been a bitch to design, yikes!!!!

A bitch and a half, to be precise. Those were a HUGE headache to create. The only solution that seemed to work was to mask the hip intake section in several stages, remove the pieces of tape, slap 'em on a sheet of paper, scan them in, trace their outlines in Illustrator, then render the designs.... BTW, this is the same process I use for the Minmay Guard sets--very time consuming.

Of course, they don't fit precisely right (does anything ever?) because there are so many variable surfaces, but the blue of the decals matches Tamiya's Flat Blue perfectly so I was able to dab a little paint here and there to fill in the micro-gaps.

nice bird......hwy when are we goning to see tha "minmay guard" i've been itchin to do a custom.

snip312

Thanks for the kind words, guys. The Angel Birds valk definitely doesn't get enough attention from toy companies. Some customizers (Jung, for example) have made 1/55 versions of this valk but they're aren't many out there. I was actually surprised when Hasegawa decided to make a 1/72 version, but I'm glad they did. I don't think this custom would look nearly as nice if the Hasegawa decals and designs weren't available. Truth be told, if trueblueeyes hadn't commissioned me to make these decals I wouldn't have done them--especially so that you didn't have to use paint. It was quite the challenge, but a lot of fun, too. It really tested the limits of my abilities.

The 1/60 Minmay Guard stickers/decals are pretty much done and will be available for purchase in about a month. I'm still tweaking the 1/55 and 1/48 versions. I'm planning on making two 1/60 Minmay Guard customs: one to keep, one to sell. Those won't be done for at least a month or two. Right now I'm waiting for the two valks-to-be-customized to arrive....

Okay, here are some pics of this custom in fighter mode:

Believe it or not, this whole custom was done using only decals. That's right--just decals. I did have to strip down the Max 1A and repaint the whole thing white, but I don't really count that step. The decals were commissioned by trueblueeyes75 almost a year ago for a custom she was working on, but she was kind enough to allow me to use a set for a custom of my own since I fell in love with this valk while working on the designs for her. This was proably the easiest custom I have ever done. That is, once I finished the decals. That was probably the toughest decal project I have ever taken on. Headaches galore, but you can see that the end result was worth the effort.

Here's what the decal set looks like:

And here's the original Hasegawa kit the custom is based on:

The custom took me about a week to complete and I have only been working on it between filling decal orders. I'll post some pics of it in fighter mode once I get a chance to do a little touch-up work.

Heh, only now I noticed that you skipped that pink/cream colored nose. Hooray for that!

Yeah....I figured if people want the pink nosecone, they can paint it on themselves. It's also very difficult to make a decal that can wrap around a conical surface without looking really cheesy....

Just a quick update. I made a few small modifications to the designs yesterday, especially the large tire tread pattern that goes across the chestplate and nosecone. It now looks even better than before. I also finished up the standard set of decals that will come with it (panel lines, hatches, kite symbols, etc.). I decided to go with a low-vis color scheme so they don't steal the show away from the more specialized designs. I'll post a pic this evening.

Anyone willing to part with a 1/60 VF-1S, or at the very least a head from a VF-1S? I want to make a proper Minmay Guard once this set is ready and I'm fresh out of VF-1S valks and Crazy Canuck custom VF-1S heads. I'm willing to pay cash or trade stickers/decals for what I need.

hehe, you know me, I just want the minmey stickers on that puppy! She looks cool in that one.     

If someone can lend me the decal sheet that comes with the model, I'd be happy to scan in the Minmay and print a few stickers for those who are interested.

Edit: If someone's willing to do a high-res scan (600dpi, ~300% magnification) and email it to me, that would work, too.

Hey Devin, are you by any chance making the new minmey guard stickers? there's a new one coming out but it comes with a strike valkyrie kit. It's call minmey guard. Let me know if you do. Thanx

I haven't decided yet. I don't know if I like the new one. The design work on the original, including the Minmay, is so much more aesthetically pleasing to me.

And a view of the back