Jump to content

VF-1 Shapeways replacement shoulder hinges: fitment


technoblue

Recommended Posts

One of my older v2 1/60 VF-1 Valkyries has succumbed to the well-documented blown shoulder issue. :( It was very easy to break down, though, and remove the affected parts to modify the pin and make it "safe" again.

I bought some shapeways replacement parts, but I am running into some surprising fitment issues. My original order used white strong & flexible polished nylon plastic. Here's what I'm seeing:

This angle shot shows how the shapeways pieces do not sit flush:

post-5492-0-95318800-1408459978_thumb.png

Here is a shot from above next to the old cracked hinge:

post-5492-0-06904800-1408460030_thumb.png

This shot shows the shapeways piece with the pin

post-5492-0-63216300-1408460101_thumb.png

I was wondering, is this within the normal margin of error? Or might it be due to the polished material? My whole order arrived this way, so I was going to try sanding the flats to try and get a better fit. But the extra thickness of material at the hinge concerns me. I may end up placing another order and skip the polished nylon plastic.

Any other thoughts?

Link to comment
Share on other sites

Thanks, CoreyD.

I"m relieved that I didn't miss anything obvious.

Update: It looks like I don't have to sand the pieces flat. :D I broke down another Valkyrie at lunch to take a look at the working mechanism. And joy! The good VF-1 shows an angle when the arms are set in fighter mode:

post-5492-0-37032600-1408471959_thumb.png

Then the shapeways replacements have this angle built in? That's some clever engineering. I do still need to sand a little bit, though, because the ball joint is a little large on my replacement pieces. It doesn't sit into the seat of the shoulder completely. But that is minor. I was thinking that I had an unlucky batch.

Edited by technoblue
Link to comment
Share on other sites

Yes, it is excellent news. Here's the original thread for reference:

http://www.macrossworld.com/mwf/index.php?showtopic=36316&hl=%20shapeways%20%20shoulders&page=1

All props should be directed to VF5SS.

Alas, while messing around with things after work today I noticed another "arm" problem:

post-5492-0-22472300-1408487022_thumb.png

That hard rubber(?) socket should be smooth inside. Instead, this one is rotting/disintegrating and creating a mess. :( Is there anything that might recondition the piece? If not, I'll need to find a spare arm for parts or buy one of those unpainted kits...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...