DrunkenMaster2

I found a good price for it here: http://www.discountanimedvd.com/detail.asp?dvdno=220 Only $9.95

Yeah!!! That link helped, I like how your YF-19 came out, it looks great Hope my comes out like that. This picture is HWR MKII valkyrie

I bought a set of those micro saws back when they were first mentioned Master Macross Modeler WM Cheng. They have proven to be indispensable. You must buy a set as soon as possible. I ordered them from HLJ. HERE 377374[/snapback] Thanks for the help everybody. Gabe Q thanks for the link!!! I may have to put my YF-19 on hold till I get these saws. Alwhile a least I can edit this step-by-step project adding pictures and text. This plane is bigger then the other valkyrie's but a fun one to put together.

I notice that when I putty and sand I lose some panel the little lines on the kit. I was looking at wm cheng past project and saw that he use a little saw to crave the lines back. Does anybody know where I can get one in the US? Here is a picture of wm cheng using this saw.

Here I dry fit the pieces, boy it's a great looking valkyrie. The blue on the canopy is a liquid mask to protact from getting paint on it. Here is the valkyrie in pieces I putty some and airbrush some pieces to see if the seam shows up or not. If it showed up I put more putty to cover it up. Here I layout the pieces to paint. I mixed up three paints to get the color that I need. 50% Gloss White X-2, 50% Flat White XF-2, and 5-7 drops of Desert Yellow XF-59.

Well looks like it's almost time to paint the body of the plane. First I glue both half of the planes together, then I putty the seams. Sorry for the bad pictures.

HWR MKII thanks for the link!! Here I oil painted the panel with black, I thin it out with mineral spirits odorless. I brush it on, neatness doesn't count, I let it sit for about an hour and half, then I wipe it off with a tissue paper. Here is what the finish parts look like after the oil paint has been wipe off.

That little green thing behind the seat where does it go again? I plan to put one there but don't know where.

Here is my pilot Isamu, sorry for the first pic. First I airbrush a basecoat of flat blue XF-8 then paint with Flat White XF-2 and for the hands I use Light Grey XF-66. For the helmet I use Flat White XF-2 and for the back I painted with Dark Grey XF-29, for the glass on the top and front I painted with Chrome Silver X-11 then painted Clear Green X-25 and Clear Blue X-23, after that dried I painted a thin coat of Smoke X-19. After I finish with the paint I seal it with the overcoat. Then applied the decals, I had to use lots of Micro Sol to make it fit, but be very careful not to touch the decal after applying the Sol.

Hi, wm cheng hope you can help along the way. Here is what I have done so far. I glue the seat to the cockpit. Here I glue the cockpit into the plane.

That's it for today I plan to take more pics soon. If I have any problems I'll post it up and maybe someone can help. Sorry for the pictures but the paint job looks better in person then in the pictures that I took. My camera is a little tricky, keep getting blue and red pixels in the shot, any suggestion on how to correct this, so I can take cleaner pictures?

Here I painted the darker area with Gun Metal it looks black but its a darker Metallic Grey, very cool color. With the Metallic Grey I paint the gun. Here I use Gun Metal to shade the gun and any other parts.

Next I putty the engine along with the gun and anything that will be painted Metallic Grey. With the Metallic Grey, I painted the engine. The yellow tape is masking the next part that I'll paint. Here I mask off the area that I don't want to get overspray on. The white tape is acid free tape, I like this tape because it doesn't peel off the paint. I plan to airbrush Gun Metal X-10 to this.

Next choose what paint to use. I like to use Tamiya paint. I started to airbrush the whole seat from the cockpit, with the Metallic Grey XF-56, then hand painted with Red X-7 for the seat. Once that dries I seal it with a clearcoat of semi-gloss (model master lacquer overcoat). I plan to paint the YF-19 like WM Cheng, I like how his valkyrie came out. Next I fill in the panel with oil paint very simple to do. Then seal it with a clearcoat semi-gloss (model master lacquer overcoat). Painted the cockpit with Light Grey XF-66 and made small windows to look like space.

Hi, This will be my first step-by-step, I was inspired by WM Cheng and Ido!! Both are very helpful and been helping me for sometimes. If you have comments or questions please feel free to ask. Here are the tools that I'll be using: Tamiya paints Tamiya basic putty Model Master Lacquer Overcoat Winsor & Newton oil paint (black and white) thin out by Mineral Spirits Odorless Acid Free tape Tamiya yellow tape Airbrush Very sharp x-acto blades Super glue Sand paper 500 and lower grit Mico Sol and Set Ok now, on with the project. The first thing to do is study your model, layout all your pieces and cut what your going to paint. Always dry fit all the parts before glueing. Be sure to cut away from the kit. Once you cut the piece off you will have to cut the nub off with a sharp x-acto blade and sand it down.

That's right I forgot about starshipmodeler!! Here is ther website: http://www.starshipmodeler.com

For the putty get the Tamiya putty basic, I like it. I don't use that green stuff no more. Don't know if you know this site but I buy most of my stuff from these guys. Tape, get a acid free masking tape it won't peel your paint off. http://www.best1hobby.com/

DYRL Kakizaki Claudia Guld another bridge bunny bridge bunny M7 capt. gloval

Don't know if anybody asked this question yet but if not I'll like to know. Is ADV going to have the original opening with the Japanese text?

I have to agree with some of these people it really doesn't look like Roy. The face does look like a G.I. Joe figure. I think I'll stick with my CMS figure. Sorry.

Couldn't agree with you more!!! I think the next time I order from HLJ I'll use EMS, the waiting SUCKS It's like waiting for 5 weeks to see if I got a Max chase figure and if I don't get one that will suck even more!!! So I better get one

If you ordered from HLJ, give or take 5 weeks (SAL). EMS still takes approximately 7-10 business days. Best option but expensive. 344277[/snapback] I ordered with SAL so 5 weeks or more not bad. Thanks for the help.

Does any know how long it takes to get to the US? They shipped it out on Oct. 24, 2005 and still waiting.

Does the exclusive Minmay have a UN SPACY logo on the stand? Like the first figure in the CMS Macross Collection Part 1.

I like the scene when Isthar is in the Macross and looks through the window and sees the city and she says "People use to live here I can still hear there songs" or something like that. When I see that scene I have flashbacks of the Macross TV series, very cool!!!