kaju1

Sweet custom parts! Where did you get the super parts, head and wings?

I have a jetfire ready for customization, I just need the VT-1 parts to do it.

I need the chest plate for my Takatoku 1/100 valkyrie.

I don't mind if it is Custom made, resin, 3D printed or authentic takatoku.

Hi, so nice from you to give it away.

I only need the front landing gear, how much would cost to ship it to CHile?

Regards.

Hi, Everyone.

I've just got the idea of a 3D printed part... since I've looking for a long time for a spare orange heat shield without any luck, not even a resin recast on the market.

Does anyone have a 3D printer? can you make a Heat Shield for a Bandai 1 55 VT-1 Super Ostrich?

Thanx.

Kaju1

I'm flying to "Guangzhou, China" Next month and I want to buy some Macross Bandai 1/55 Valkyries from the 2001 made in China serie.

Does anyone know a store or dealer to buy what I'm looking for?

...I'm also going to Hong Kong for the day, since it's very close from Guangzhou.

Thanx.

Please help me on my quest, I need the instruction booklet to print out, can you please send it to me scanned.

It is for the Strike Valkyrie from 1984, scale 1/55, made by Bandai.

Take care and good luck on your collections.

Hi everyone.

This time I'm looking for:

Bandai 1/55 strike Valkyrie transformation instructions.

Hope to buy the original one, but I'll settle for now with a free scanned one to print at home.

Thanx.

Just bought one!!! Lucky me it was brand new and I got it for less than $200.00 shipped...

Thanx to all.

This time I'm looking for a 1984 Bandai (Scale 1:55) VF-1S Strike valkyrie lose.

There is a variant that I'm interested on, the one with the Bandai mark and date on a black sticker on the inner chest.

Are you looking for an specific scale? 1/55? 1/72?

Are you interested on lose or boxed?

Good luck on your quest.

pues si se ve bastante sospechoso habria que consultar con los expertos pero para mi que es una copia

Estuve averiguando más y revisando mis cosas, luego encontré que en las especificaciones del Strike original la figura aparece con el logo macross del ala en blanco y negro, lo que es consistente con la figura que había en Ebay.

Ahora sólo quiero poner mis manos en uno de esos Strike con logo blanco y negro y marca en sticker.

...por otra parte siempre me extrañó que todas las otras figuras de la serie D.Y.R.L. tuvieran la marca como sticker y solo el Strike viniera con la marca grabada.

Seguramente el que viene con sticker es primera edición e igual de escaso que el VT-1 y VE-1, luego deben haber fabricado de manera masiva otros Strike con logo grabado y ese es el que vemos de manera común en sitios como ebay.

Hi there.

I'm looking for a VF-1A Max Jenius Bandai from the Origin of Valkyrie series (2008).

Doesn't matter if it is brand new, used, boxed or lose.

Please contact me if you have one.

Take care and have a great day!

I'm looking to buy a GBP armor, not boxed.

It is for my Bandai and Takatoku Valks, scale 1:55

Thanx.

I've just realized this... There are 2 versions of the Bandai 1984 Strike Valkyrie Scale 1:55.

I'm pretty sure everyone here knew this before me, but I must post it anyway.

Version #1:

-Black Macross wing logo

-Black Bandai Sticker and date on the inner chest.

Version #2

-Red macross wing logo

-No sticker but regular carved "Bandai" and "made in japan"

Hola, alguien sabe si existe más de una versión del Strike Valkyrie escala 1/55 fabricado por Bandai en 1984 de la línea D.Y.R.L?

Tengo 2 y ambos en la parte interna donde aparece la marca, vienen grabados en el mismo plástico.

Pero hay uno en venta hoy en Ebay que en vez de eso tiene unos stickers negros con la marca y fecha, igual a como venía el Super Ostrich de la misma Línea D.Y.R.L.

También noté que el que trae la marca grabada viene con el logo macross en color rojo, mientras que el que trae la marca en forma de sticker viene con el logo en blanco y negro.

les dejo el enlace para que vean a lo que me refiero... ver última foto.

http://www.ebay.com/itm/161337714105?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

Atento a sus comentarios.

Nice one, it looks great! ...good luck on your sale.

By the way, do you have a spare Shoulder cannon or also known as Strike cannon like the one on your Valkyrie?

It is the only part missing on my original Super Strike Vakyrie.

Hi again.

I'm now on the quest for an orange heat shield, original or recast fot my boxed 1:55 Bandai VT-1 Super Ostrich.

Please help me on this one.

P.M. me if you have one or tou know somebody who does.

Thanks and good luck.

Hi, I'm still looking for some parts for my Super Strike Vaslkyrie 1:55 Bandai

What I need:

-Shoulder cannon

-Wing Missiles

-Minmay Doll

Original or resin recast, please help me on this quest!

P.M. me if you think you can help me.

Thanks and good luck to all the 1:55 Bandai or Takatoku collectors out there.

Can you post or send a picture of them? would you ship it to Chile?

I'm looking for a lose GBP Armor to use on my valkyries. (Not looking for a boxed one or a NIB, because of the price)

Must fit the Bandai/Takatoku Valkyries.

Thanx for your help.

I'm looking for the missiles showing in the picture below.

Original or recast.

Thanx for your help.

Do you still have the GBP armor? is it complete?

saw this on ebay :

http://www.ebay.com/itm/Bandai-Macross-Robotech-Valkyrie-left-arm-to-a-1-55-scale-VE-1-Elintseeker-/190881358937?pt=US_Action_Figures&hash=item2c716a6459

Hi, yes I saw it, but that one is grey and the arms I need must be white.

Thanx anyway for being interested and traying to help.

Take care.

K,

Are you just looking for just the arms? Or do you need the arms, gear, spring and screw? Thanks

I still have the screws and all the parts from the arms that got broken so I just need the arms, but if the ones I buy come with all of it will work fine too.

Do you have any for sale?

Thanx for your interest.

Hi everyone.

On this opportunity I'm looking for a pair of arms for one of my valkyries, it had an accident on a space battle and no longer has arms.

Must be white, 1:55 scale, Bandai, Takatoku, Matsushiro, Joons or other on the same scale will do fine.

Please help me on this quest.

Hopefully someone will offer what I'm looking for and will have mercy on the price.

...I'm from Chile

(USPS First Class Mail Intl / First Class Package Intl Service: Aprox. $5.00)

Take care.

Hi, I have some vintage and some reissues but for sale I have only the one from joons, picture below. (new in box, I opened the box only to check it out and to take pictures

The stickers sheet is poor quality that's why it looks so bad.

)

USD $140.00 plus shipping.