sc_planet

9 hours ago, TehPW said:

nice work...

Now to nitpick.

The first thing i see that might be/should be wrong is the size and placement of the Jet Intake warning. Unless it would be common for that inlet cover to be at a higher angle when on the ground, the markings should extend along the outside of the inlet covers in some manner along each edge, merging at the front of the plate (see PIC #2's angle).

The second thing is that there should be No Step markings on the UNDERSIDE of the wings as well (because the JA's wings are hydraulically hinged to flex in both directions when in Gerwalk mode)

Third? No 03 high on the tail (because when you are an AD working in Power Plants WC in a futuristic Fighter Squadron and Maintenance Control sends you out to do a 30-day inspection on those Inlet Covers, MC would have told you Modex # 03, so you're looking at the highest point on each aircraft, to make sure you are working on the CORRECT fighter)

were there any pics of either fighter, on the ground and idle, in Macross II: LA?

Very impressive comment and much detailed than then official specification. Look forward to seeing your prefect work

This is a 1/72 VF-2JA resin.  I think it should be a WF kit back to 2013.  

This took me almost 1 year to finish especially due to the horrible holes on the surface.  

Hope to finish another project in 2 months.    

Feel that I should finish and post these before the release of YF-19 fold booster

Both VF-17 and fold booster are 1/72 resin.  

VF-17S resin by seventh moon.  Again, quite a challenging exercise.  2 more VF-17 will be coming very soon. 

Thank you so much for the comments, support and appreciation.  Perhaps i should tell more about the mistake.  There was a drop of paint that damaged the surface at the final stage.  I tried to sand that part and paint again, but it was not totally unnoticeable.  But I should be glad that it is not too obvious.  

i will consider to paint the canopy frame.  Thank you for the suggestions.  

Other projects in pipeline: VF-2JA, 3 x VF-17, YF-25 with parts of Frame Out Model.... and many others to follow 

Finally completed this Moscato task, but sad for a fatal mistake, otherwise this would have been a successful project.  

I am the owner 😁

10 hours ago, kajnrig said:

Ooh, very nice clean job! Indeed the Delta kits are particularly fragile, and Bandai's decals have never been the greatest.

I quite like that base. Very simple and elegant, and adding the emblem is a nice touch. What is it and where did you get it?

Sorry. Used a wrong account to reply. Yes pls pm if you are interested.  I can buy for you 

It's my first time to build a Bandai 1/72 Valkyrie in Delta series.  I never imagined that it's so challenging.  The decals and the plastics are so fragile!

This drone was finished months ago.  Finally got the chance to edit the photos.  

Finally completed the Bandai VF-27 1/72 model, with resin parts for the booster. 

A painful but fruitful journey to build this.  The most terrible part is that the decals were vanished once they were put in the water.  Finally I had to scan the decals and stickers, remove the background in photoshop, and then print them as decals again. 

I got it years ago in yahoo.co.jp. I tried to work on it but gave up because of the quality of the 3d print.  I think it will be much better if it can be printed out again with the 3d print technology today. 

can I ask if you happen to have the waterslide decal of Banda 1/72 VF-27 scanned in 600 dpi?  Mine was too fragile and totally gone.  Thanks for the help

Resin by Moscato many years ago 

Just finished the 1/72 Nousjadeul Ger resin from Moscato/Return 2 Kit. 

Regult is a completed Hasegawa model purchased from Japan.  The soldier is commissioned work years ago.  

Made from a 3d print ordered from shapeway 

Collection of Max and Milia in 1/72 resins or Hasegawa models during the past decades. 
 

I made some of them. Some were commissioned work and some were from yahoo.  
 

The mission of Max and Milia collection is now completed. 

Here comes the conclusion of trilogy of Queadlunn Rau (in 1/72 of the TV version)

14 hours ago, Shawn said:

Amazing amount of effort, with incredible results. You nailed the Meltradi vibe 100%, and your photo collage choice is top notch.
wow!

Thank you.  I think they took me 3-4 months.  The custom decals really made a lot of difference 

Finally completed the first 2 parts of trilogy of Queadlunn-Rau

Made from resin in scale of 1/72

Challenging but fruitful journey

19 hours ago, no3Ljm said:

No, it's not a decal. It's already been printed on to the figure. 

However, @jenius included a scan of the sticker on his Evolution Toy 1/60 VF-2SS review over Anymoon.com.

Hope that helps.

Thank you for the help 

Hi all 

Does anyone know if the UN logo in blue is a decal?  If yes and you have it, is it possible to beg your help to scan a 600 or 1200 dpi version of it?  I want to print some to put on some Macross II resins/3D print.

thank you for the help.  

Macross 5 (NMCV-005) appeared in Macross 7. It was launched from Earth some time in the 2030s.  This ship's fleet was mostly comprised of Zentradi.  The ship has been taken over by Protodeviln in 2045 shortly after the fleet has discovered planet Rax.  The ship crew and colonists have been turned into either brainwashed soldiers or living batteries. 

This is made from a resin kit released in Wonder Festival in early 2010s.