Jump to content

macross class battle carrier 3d models DL!!


reaper7092

Recommended Posts

On 2/21/2023 at 5:58 PM, reaper7092 said:

Hello everyone, in the last year, I have exported macross games and rework the 3D models of the macross-class battleships.  they are all low-poly models. Welcome to download and use.

Thanks a lot.  Would you be able to rip the character figures from the Macross 30 game?

And you are welcome to check out my free 3D figure downloads.

Link to comment
Share on other sites

23 hours ago, arbit said:

Thanks a lot.  Would you be able to rip the character figures from the Macross 30 game?

And you are welcome to check out my free 3D figure downloads.

Unfortunately ,no character 3d models in MACROSS 30 game

only more valkyrie fighter,battleship , hanger, boss ,&all maps

 

You can see here how to extract game models

https://forum.xentax.com/viewtopic.php?f=16&t=11681&hilit=macross&start=30

 

Other 3D models of macross characters can be found here

https://www.reddit.com/r/UtaMacross/comments/ao6fzl/game_assets_dump_part_2_updated_when_new_assets/

https://cults3d.com/en/search?q=macross

I hope this information can help you

20230225014702.png

20230225015414.png

Link to comment
Share on other sites

28 minutes ago, reaper7092 said:

Unfortunately ,no character 3d models in MACROSS 30 game

only more valkyrie fighter,battleship , hanger, boss ,&all maps

Thank you.  I thought there was one 3D figure model of the female pilot character in Macross 30.

Link to comment
Share on other sites

  • 2 weeks later...
On 2/21/2023 at 8:58 PM, reaper7092 said:

Hello everyone, in the last year, I have exported macross games and rework the 3D models of the macross-class battleships.  they are all low-poly models. Welcome to download and use.

Please ? Can you export 3d model  macross battle frontier and galaxy in FBX format 

Edited by Mike99
Link to comment
Share on other sites

On 2/21/2023 at 8:58 PM, reaper7092 said:

Hello everyone, in the last year, I have exported macross games and rework the 3D models of the macross-class battleships.  they are all low-poly models. Welcome to download and use.

Please ? Can you export 3d model of macross battle frontier and battle galaxy in FBX format 

Edited by Mike99
Link to comment
Share on other sites

14 hours ago, Mike99 said:

Please ? Can you export 3d model of macross battle frontier and battle galaxy in FBX format 

Sorry,I focused on rebuilding a BATTLE-class MACROSS was I like, so I didn't see the following posts

https://drive.google.com/file/d/1-2qUrlhBrsqRDyIIl2ah1Alu1ugDLVwB/view?usp=sharing

https://drive.google.com/file/d/1hZgfCI_29nrHkAQ3HHQ_LuyQRIAzdDJk/view?usp=share_link

 

 

battle_macross_G.png

battle_macross_f.png

battle_macross.png

Link to comment
Share on other sites

On 3/8/2023 at 7:10 AM, reaper7092 said:

You may need a 3D model of the quarter hangar & need more work

https://drive.google.com/file/d/102xQyogFj5IvQnfjTks9jKNgbMnWblo0/view?usp=sharing

20230308135801.png

OK, so lots of questions, but the most important:

1 - Where did this Koenig Monster come from, because I can't find it in the Uta Macross rips that were posted on Reddit

2 - Is there an Armored VF-25 in your stash somewhere (also missing from the Uta Macross rips)

3 - (Not entirely seriously) Where does this ginormous hangar fit inside of the Macross Quarter if it's only 400 meters overall? (two Super VF-25s barely fit side by side on the flight deck...)

Also, compared to the Battle Frontier and the Macross Quarter, the Macross Elysion model feels kind of lackluster. All of the turrets are missing etc from the OBJ version. But it's much, much better than having *nothing* to work with. 

(Edit: The FBX version of the Elysion worked much better, all the colors in the right places and all the turrets are there). 

Edited by SebastianP
Link to comment
Share on other sites

The Koenig Monster 3D model is extracted from the macross 30 game file

all VF Armorpack are independent 3D models, need to find corresponding models and combine them without instructions

the hangar of Quarter is probably only on the left arm. However, there are many inaccuracies in the desin, like the transformation mechanism of Battle-class and elysion
I prefer the full-size 1680 meter battle-class. The size of the elysion is actually much smaller. It is 828 meters in the strong attack mode, and only 2/3 of the battle-class. Its main gun power is not enough, but its mobility will be better. It may be the abandoned case of Quarter(I can't find a clearer picture)


The OBJ file is directly exported from the "Macross Delta: Scramble" game file. The turret can be rotated and destroyed, so the 3d model file is independent, and FBX is modified and edited by me

20230312154930.png

20230312155831.png

psb (4).jpg

20230312160909.png

Link to comment
Share on other sites

28 minutes ago, Valkyrie Obscura said:

Would you be willing to share the Monster, or can provide top, side and front views of the model?

The model is in the link. Nice one too.

Link to comment
Share on other sites

12 hours ago, reaper7092 said:

The Koenig Monster 3D model is extracted from the macross 30 game file

all VF Armorpack are independent 3D models, need to find corresponding models and combine them without instructions

the hangar of Quarter is probably only on the left arm. However, there are many inaccuracies in the desin, like the transformation mechanism of Battle-class and elysion
I prefer the full-size 1680 meter battle-class. The size of the elysion is actually much smaller. It is 828 meters in the strong attack mode, and only 2/3 of the battle-class. Its main gun power is not enough, but its mobility will be better. It may be the abandoned case of Quarter(I can't find a clearer picture)


The OBJ file is directly exported from the "Macross Delta: Scramble" game file. The turret can be rotated and destroyed, so the 3d model file is independent, and FBX is modified and edited by me

Thanks for putting together those FBX files, then. :)

The official sizes of the ships are *really* not matching up with the scaling cues on them, or what's shown in the show. I'm going to see if I can put together a little demo.

I scaled the Elysion to 900 meters overall like you did in your comparison, and then put a correctly scaled VF-31E with super packs from Uta Macross at the aircraft elevators on the Hemera. 

XrN2SWG.png

That... does not fit. Those elevators would be unable to carry a VF-31 from the hangar to the deck because they're not big enough. 

Rm6Gaqd.png

Same with the jet blast deflectors, they're way too small, and the spacing between the catapult tracks does not work either. 

5ARW1vs.png

This is what the elevators look like with the Elysion at 1450 meters overall length, Notice how the elevators are now big enough to handle the aircraft...

Urc5gqA.png

And, the Jet Blast Deflectors are now large enough to work. Sort of. 

Gh6qreg.png

On the Quarter, the elevators are large enough to handle the fighters from the start with an overall ship length of 400 meters, but there's not enough room inside the hull to store the fighters. Seriously, I don't think the four fighters of Skull Squadron fit inside the amount of space available in that hull, let alone the scenes we got in the show and the movie where there a dozen fighters with space in between. The hull just isn't wide enough, because the whole carrier is only 215 meters overall, and that's counting the extension of the angled flight deck at the back. 

(I think there's also an issue with the bridge if the Elysion is just 900 meters in ship form, as I don't think it'll be tall and wide enough...)

Link to comment
Share on other sites

About  2/3 macross class


I think the two hexagonal structures on the side of the deck are not the lifting platform. This side deck has a downward overturning structure

I found some pictures to refer to the size of the valkyrie fighter on the deck

But there is no doubt that there are some variables that can be scaled in the design of this ship

What we already know is enterprise class carrier design by Tenjin Hidetaka(cv/c-109、cv/c-110)

And from the screenshot of the animation, the valkyrie fighter must be launched in batches

So I think the size of the 800-meter scale is correct


 

暴风截图202331326484218.jpg

暴风截图20233133021671.jpg

暴风截图202331324320328.jpg

暴风截图20233132835000.jpg

暴风截图202331326664359.jpg

Valkyries_Third_Sortie_113.jpg

f63aa4b79888305be8a86a99a6145b39.jpg

暴风截图202331326109906.jpg

Link to comment
Share on other sites

About 1/4 macross class

According to the setting, the length of macross ship is 472 meters

The length of ARMD-L is 254 meters

design by Ishigaki Junya

You can see the fighter parking mode in the design book

I have a 3d model of extraction failure, which you can use for reference

https://drive.google.com/file/d/1nES9b-xqeB4DcEJAekszrnmPkAg7mTPe/view?usp=share_link
 

Mechanic Sheet 09 MF-005.jpg

Mechanic Sheet 10 MFG-005.jpg

QQ截图20230313213049.png

Valkyries_Third_Sortie_104.jpg

QQ截图20230313215217.png

QQ截图20230313215224.png

Edited by reaper7092
Link to comment
Share on other sites

Hmm, those other effects shots match the official scale better, so it's possible. Still very very iffy on the room inside of the ships though. 

I'll see what things look like once I've corrected the Quarter's scale (I had it as 460-something m)

Edited by SebastianP
Link to comment
Share on other sites

  • 2 weeks later...
On 3/8/2023 at 11:50 AM, reaper7092 said:

Can you give me Battle macross class that you make in obj formatbattle_macross.png.22adc56023a2b9c2607ab126c4968286.png.3aa43b6349fdd024a82f91446817e6e7.png

Link to comment
Share on other sites

  • 2 weeks later...

I hesitate to ask, because I don't want to sound like I'm begging or anything, but is there any chance you could extract the non-transforming capital ships? Northampton, Uraga, Guantanamo, Stealth Cruiser and Gefion (carrier Northampton from Macross 30) are very very much on my wishlist, and I've been trying to extract the Gefion myself but the tools I was using wouldn't work. 

 

 

Link to comment
Share on other sites

At present, only aircraft carriers, cruisers, and destroyers have 3D model files(only 3 ship type). The biggest problem is that their point defense AA guns are scattered in different independent files, and I need to spend some time combining them. But if you don't wait, I can tell you how to extract "Macross Delta: Scramble" game files

I didn't find any other warship models in the game Macross 30. It's estimated that some models have different formats and cannot be read
 

QQ截图20230404083030.png

Link to comment
Share on other sites

On 4/4/2023 at 2:31 AM, reaper7092 said:

At present, only aircraft carriers, cruisers, and destroyers have 3D model files(only 3 ship type). The biggest problem is that their point defense AA guns are scattered in different independent files, and I need to spend some time combining them. But if you don't wait, I can tell you how to extract "Macross Delta: Scramble" game files

I didn't find any other warship models in the game Macross 30. It's estimated that some models have different formats and cannot be read
 

QQ截图20230404083030.png

 

I'll be patient and wait... Thanks for doing this anyway.

It's a shame if the other ships can't be read - Macross 30 had a Thuverl Salan and I think a couple of Vajra ships, as well as the modified frigate and the pirate ship, all of which would be very nice to have as reference material.

Link to comment
Share on other sites

On 4/4/2023 at 1:31 AM, reaper7092 said:

At present, only aircraft carriers, cruisers, and destroyers have 3D model files(only 3 ship type). The biggest problem is that their point defense AA guns are scattered in different independent files, and I need to spend some time combining them. But if you don't wait, I can tell you how to extract "Macross Delta: Scramble" game files

I didn't find any other warship models in the game Macross 30. It's estimated that some models have different formats and cannot be read
 

QQ截图20230404083030.png

This is amazing! I've been recently getting into 3d model printing and went hunting for Macross models and found this page. Man, oh man I love this. That said, I'd love to get my hands on those escort ship models the most cause I haven't seen them posted anywhere else on the internet.

I hope it's ok to ask but if you do get time are you able to put these models up as they are now please? Potentially as OBJ files if at all possible.

Edited by Strike Albion
Addon
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...