Jump to content

HMR Macross Zero VF-0S Phoenix


jvmacross

Recommended Posts

dhl01.jpg.4da65d8e5905d81091b724a8a43c3372.jpgdhl03.jpg.f0d5d0f5ca7be3e111e3fe3f59ff18d3.jpg

damn my second copy arrived today from AmiAmi with quite a bit of transit damage beyond my level of acceptance. The item box inside was crushed and folded badly from impact side to side. It was shipped with DHL. I emailed AmiAmi to make a claim, anyone with the experience?

Link to comment
Share on other sites

So I’ve decided a little bit of detail up work on my copy. I don’t usually bother with panel washing but the HMR 0S was screaming for one. Much less tolling to mess up a HMR than a DX anyway.😆

C96A7393-853D-46EB-953E-449AFF0D4D20.jpeg.b378fb1fd287a25a89323a88e19609a8.jpeg

D087CF6B-A62E-4437-A952-82538A7E031B.jpeg.d9ab5e4f9b289ee89f7219d81377dec6.jpeg

34CB6CF6-5349-4D41-B4B1-84F5A13962B6.jpeg.294f05ce6a32f60d2c67cfbb39b009c2.jpeg

Starting with the head cannon details drilled holes and red stripes added.☺️

Edited by Angesdad
Link to comment
Share on other sites

5 hours ago, Angesdad said:

So I’ve decided a little bit of detail up work on my copy. I don’t usually bother with panel washing but the HMR 0S was screaming for one. Much less tolling to mess up a HMR than a DX anyway.😆

C96A7393-853D-46EB-953E-449AFF0D4D20.jpeg.b378fb1fd287a25a89323a88e19609a8.jpeg

D087CF6B-A62E-4437-A952-82538A7E031B.jpeg.d9ab5e4f9b289ee89f7219d81377dec6.jpeg

34CB6CF6-5349-4D41-B4B1-84F5A13962B6.jpeg.294f05ce6a32f60d2c67cfbb39b009c2.jpeg

Starting with the head cannon details drilled holes and red stripes added.☺️

Looks so much better now!

I've never liked how inconsistent Bandai's paint work on their HMR valks have been. They cut so many corners that they end up looking like half-finished models with lots of obvious details missing. I had to put in a lot of work to make the VF-4 look decent as I thought it looked kinda anemic out of the box.

"Arcadia doesn't put enough tampo on their non-PF valks."

Bandai: Hold my beer.

Link to comment
Share on other sites

5 hours ago, Angesdad said:

So I’ve decided a little bit of detail up work on my copy. I don’t usually bother with panel washing but the HMR 0S was screaming for one. Much less tolling to mess up a HMR than a DX anyway.😆

C96A7393-853D-46EB-953E-449AFF0D4D20.jpeg.b378fb1fd287a25a89323a88e19609a8.jpeg

Starting with the head cannon details drilled holes and red stripes added.☺️

 

Drill holes on a piece so small? I wish I got that steady a hand.. Nice work! :good:

Link to comment
Share on other sites

8 hours ago, Angesdad said:

So I’ve decided a little bit of detail up work on my copy. I don’t usually bother with panel washing but the HMR 0S was screaming for one. Much less tolling to mess up a HMR than a DX anyway.😆

C96A7393-853D-46EB-953E-449AFF0D4D20.jpeg.b378fb1fd287a25a89323a88e19609a8.jpeg

D087CF6B-A62E-4437-A952-82538A7E031B.jpeg.d9ab5e4f9b289ee89f7219d81377dec6.jpeg

34CB6CF6-5349-4D41-B4B1-84F5A13962B6.jpeg.294f05ce6a32f60d2c67cfbb39b009c2.jpeg

Starting with the head cannon details drilled holes and red stripes added.☺️

Did you use a pin vice to drill the holes? The red stripes look pretty clean and uniformly done. Looks good overall!

If you want to add a little a little more detail, you could also add the arrows that should be on the circular part of the head laser.

vlcsnap-2015-07-28-20h43m33s50.png.5898d3543d86589b7383d135df24a712.png

 

Link to comment
Share on other sites

8 hours ago, MacrossJunkie said:

Did you use a pin vice to drill the holes? The red stripes look pretty clean and uniformly done. Looks good overall!

If you want to add a little a little more detail, you could also add the arrows that should be on the circular part of the head laser.

vlcsnap-2015-07-28-20h43m33s50.png.5898d3543d86589b7383d135df24a712.png

 

Yup I used a pin vise with the smallest drill bit I could find and carefully drilled out just enough material for black wash to set in. The red stripes at the tip I attempted to paint at first but it didn’t look straight thus went with a decal instead. 😉 Wish I could cram in more details as you suggested but it is just too small that you can only do key details to make it pop.

Link to comment
Share on other sites

13 minutes ago, Angesdad said:

Yup I used a pin vise with the smallest drill bit I could find and carefully drilled out just enough material for black wash to set in. The red stripes at the tip I attempted to paint at first but it didn’t look straight thus went with a decal instead. 😉 Wish I could cram in more details as you suggested but it is just too small that you can only do key details to make it pop.

Yeah, I was mostly kidding when I suggested that and would have been very surprised if you actually tried. 😄

The red stripes look good regardless of how you accomplished it. It definitely would have been difficult to paint it, especially on something that small of a scale.

Link to comment
Share on other sites

Updates. I’ve been using Tamiya light gray panel wash because the blackest black panel lines against the white makes it look horrible as we all know. My finding though after messing around a bit, intended subtle panel wash doesn’t really work effectively on the scale of HMR and all my efforts to payout ratio isn’t that great. Spraying top coat also kills the wash a bit…Time to try regular gray wash.🤪

E0EBDA37-A251-4583-90AC-035D4A306A44.jpeg.5d8b183858963ee636cc7798dc1b757f.jpeg
C4D62D3B-98F9-444D-87EC-9D6B6AB80BBA.jpeg.77a7f45e631cca67ca4851c054048e46.jpeg

Link to comment
Share on other sites

On 10/29/2022 at 4:36 AM, Angesdad said:

dhl01.jpg.4da65d8e5905d81091b724a8a43c3372.jpgdhl03.jpg.f0d5d0f5ca7be3e111e3fe3f59ff18d3.jpg

damn my second copy arrived today from AmiAmi with quite a bit of transit damage beyond my level of acceptance. The item box inside was crushed and folded badly from impact side to side. It was shipped with DHL. I emailed AmiAmi to make a claim, anyone with the experience?

I believe the issue is with DHL and not amiami.

Link to comment
Share on other sites

On 10/28/2022 at 1:36 PM, Angesdad said:

dhl03.jpg.f0d5d0f5ca7be3e111e3fe3f59ff18d3.jpg

damn my second copy arrived today from AmiAmi with quite a bit of transit damage beyond my level of acceptance. The item box inside was crushed and folded badly from impact side to side. It was shipped with DHL. I emailed AmiAmi to make a claim, anyone with the experience?

Sorry that this has happened, @Angesdad.

7 hours ago, fenrir72 said:

I believe the issue is with DHL and not amiami.

I'm thinking the same. I wonder what happened during transit to dent the box like that knowing that Amiami's boxes is thick and sturdy?

Link to comment
Share on other sites

16 hours ago, Angesdad said:

Updates. I’ve been using Tamiya light gray panel wash because the blackest black panel lines against the white makes it look horrible as we all know. My finding though after messing around a bit, intended subtle panel wash doesn’t really work effectively on the scale of HMR and all my efforts to payout ratio isn’t that great. Spraying top coat also kills the wash a bit…Time to try regular gray wash.🤪

E0EBDA37-A251-4583-90AC-035D4A306A44.jpeg.5d8b183858963ee636cc7798dc1b757f.jpeg
C4D62D3B-98F9-444D-87EC-9D6B6AB80BBA.jpeg.77a7f45e631cca67ca4851c054048e46.jpeg

Now that's the VF-0 we should have gotten out of the box! Especially if Bandai insists on overcharging overseas customers. 

Link to comment
Share on other sites

17 hours ago, no3Ljm said:

Sorry that this has happened, @Angesdad.

I'm thinking the same. I wonder what happened during transit to dent the box like that knowing that Amiami's boxes is thick and sturdy?

Thanks @no3Ljm, yeah it's the first time receiving stuff from AmiAmi in this manner as you say their box is on the studier side. DHL must've thrown my box around.:crazy:

AmiAmi responded to my inquiry and offered a replacement or refund. Either way it's trouble I shouldn't have had in the first place.

Link to comment
Share on other sites

That's some impressive damage!  As others have said amiami boxes are pretty sturdy.  The 2 times i used DHL my boxes came to me in a similar condition.  Although my boxes were shipped from Amazon.jp and their boxes are rather thin.  Since then, I'm extremely reluctant to use DHL for anything unless I absolutely have to.

Link to comment
Share on other sites

1 hour ago, TheLoneWolf said:

That chart is wrong. The VF-0 is 14 meters tall in battroid mode, but that chart shows it at a whopping 16 meters.

You’re right. But the VF-2 and the VF-0 should both be the same height at 14m.

At HMR scale those too still appear a bit too large.

Link to comment
Share on other sites

7 hours ago, nightmareB4macross said:

You’re right. But the VF-2 and the VF-0 should both be the same height at 14m.

At HMR scale those too still appear a bit too large.

Looks about right in @Convectuoso's picture, so I'm thinking there is something weird with the video shot. I may take a look at mine (though I don't have either standing straight up).

Link to comment
Share on other sites

On 11/2/2022 at 11:11 PM, nightmareB4macross said:

You’re right. But the VF-2 and the VF-0 should both be the same height at 14m.

At HMR scale those too still appear a bit too large.

 

On 11/3/2022 at 6:30 AM, vladykins said:

Looks about right in @Convectuoso's picture, so I'm thinking there is something weird with the video shot. I may take a look at mine (though I don't have either standing straight up).

still too lazy to do my own, but here's another snapshot from Wotafa's video:

image.png.0cc6fad5149daf45ad32794978f84e5b.png

Link to comment
Share on other sites

Received the VF-0S today.

To be honest, I had some trepidation because there have been little rumblings here and there on the quality not being up to usual HMR standards. These were mostly to do with how cheap the plastic feels & how thin the plastic is until light shines through easily, stuff that were never an issue with previous HMR releases like the VF-4. Some quick impressions:

In hand, the plastic feels.. different than other HMR VFs, but not necessarily cheap. In fact, the texture feel very similar to the new plastics used for the recent VF-25 WWM and YF-29 Max. I've only handled Battoird & Gerwalk so far, and find some parts do look quite thin, with joints & hinges around the chest area flexing a bit more than I would like during mid-transformation. But none of the parts feel as though will break easily - on contrary they are quite strong. I'm thinking Bandai is really going for accurate proportions here, so perhaps some parts are smaller / thinner / finer to achieve that for this size. 

Where other feeling of cheapness may come from is its weight. It is only 94g, compared to the VF-4's 110g and VF-2SS's 122g (the VF-1 is 80g). So it does kind of feel lighter than expected for its size.

Once I start putting it through its paces though, its quickly apparent that that the tolerances are pretty much top notch. On my copy at least, all joints move with consistent fluidity and mostly appropriate tightness depending on area, making this toy a pleasure to handle. I feel this aspect is the hallmark of excellent engineering, more so given its scale. Kitz Concept would do well to take copious notes here for their 1/72 VFs!

Only the cockpit shield was much tighter than it should be; on the upside it does cover the canopy completely in Battroid (I was afraid it wouldn't, seeing quite a few mis-transformed examples before this).

Unfortunately, the plastics appear to have some unwanted levels of translucence. This is the complaint by some, but the way I see it, wrongly attributed to plastic thickness but is due to the plastics color itself. It's not noticeable during normal handling, but the moment some light gets behind it, the translucence becomes quite apparent, like the following pic :unsure:..

   

2024163061_HMRVF-0SBattroidNRM2v1.1_1nt.jpg.41dab3b61f27e9604b969fc9217237ae.jpg

 


After Battroid, I moved on to Gerwalk and have to agree with others who mention this is the best mode. The range of articulation & balance here is really nice, and I attempted to have it emulate Roy on one of his moves during his Gerwalk melee with Ivanov on the aircraft carrier deck.. 

2009543831_HMRVF-0SGerwalkv2NRM2nt.jpg.be1300758cdf97cada8a416e095fc6b2.jpg

 

797390430_HMRVF-0SGerwalkv3NRM2nt.jpg.5e96f23d3f1e674d49ee7fc0f41a88a6.jpg

 

It is really a treat to have the rainbow cockpit canopy here again, after losing it from Yamato's valk days. For now, I'm leaving it in Gerwalk for display..


 

Edited by MKT
Tweaked & added pic
Link to comment
Share on other sites

On 11/7/2022 at 2:26 PM, jvmacross said:

:good:

sample-bc754d4501746e0a716c132563802944.

Thanks.  I'll probably do a version 2 of all of the poses I've done so far.  I usually would have the reference pic in front of me while posing the figure.  Unfortunately none of the VF-0S toys can angle its legs like that.

Link to comment
Share on other sites

1 hour ago, sh9000 said:

Thanks.  I'll probably do a version 2 of all of the poses I've done so far.  I usually would have the reference pic in front of me while posing the figure.  Unfortunately none of the VF-0S toys can angle its legs like that.

Haven't handled mine enough to know...but not surprised if it can't do those extreme poses

Link to comment
Share on other sites

16 hours ago, Lolicon said:

Really like the rainbow canopy tint Bandai added. Hope it becomes a regular fixture moving forward. Much better than the glitter tint of the 31 line! 

I do agree, the VF-31 heavily opaque canopies are quite a turn off.. 

Link to comment
Share on other sites

22 hours ago, MKT said:

Unfortunately, the plastics appear to have some unwanted levels of translucence. This is the complaint by some, but the way I see it, wrongly attributed to plastic thickness but is due to the plastics color itself. It's not noticeable during normal handling, but the moment some light gets behind it, the translucence becomes quite apparent, like the following pic :unsure:..

2024163061_HMRVF-0SBattroidNRM2v1.1_1nt.jpg.41dab3b61f27e9604b969fc9217237ae.jpg

Tbh, Arcadia's VF-1 toys have been sporting similar transluscent plastic for years and there haven't been any durability issues. I agree that it's likely due to the color of the plastic than thickness, since it's not that apparent on any non-white parts.

Attached photo is courtesy of davidwhangchoi.

eahnIgOl.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...