RavenHawk Posted June 6, 2021 Share Posted June 6, 2021 On 6/4/2021 at 9:13 AM, tekering said: it won't receive approval from Harmony Gold and/or Big West, and will simply remain among the dozens of other unproduced MEP figures Which figures are you referring to? The only ones that I can think of (probably because I haven't been paying attention) were the Regent, Regess, and the Hellcat, which I remember seeing 3d printed prototypes of but seem to have disappeared since then (or maybe I'm not looking hard enough). I was actually hoping to pick up the New Gen/MOSPEADA stuff, and the Sentinels will always have a place with me just because of how much I enjoyed the books when I was a kid. Quote Link to comment Share on other sites More sharing options...
tekering Posted June 6, 2021 Share Posted June 6, 2021 1 hour ago, RavenHawk said: Which figures are you referring to? Apart from the five Invid figures already mentioned, MEP has also publicly displayed prototypes for: Khyron Azonia Exedore Dolza Miriya Nova Satori Marie Crystal Dana Sterling Maia Sterling M-32 Hover Cycle VF-8 Logan VHT-1 Hovertank Others have been mentioned on Facebook, but I don't count 'em until physical prototypes have been confirmed... ...but yeah, you're not looking hard enough. Quote Link to comment Share on other sites More sharing options...
Podtastic Posted June 6, 2021 Share Posted June 6, 2021 On 6/5/2021 at 9:58 PM, Big s said: but maybe the alien mecha should have been bigger Not maybe, definitely. For the pilot to fit Zentraedi mecha would have to be - as PC's Glaug pilot figure demonstrated in 3d - much larger. Quote Link to comment Share on other sites More sharing options...
Sgt Nate V Posted June 7, 2021 Share Posted June 7, 2021 (edited) That Spartas looks pretty sick, I hope it gets off the ground unlike the MAAS Toys one (and it seems like it'll be at least a little bit lower-priced too) Edited June 7, 2021 by Sgt Nate V Quote Link to comment Share on other sites More sharing options...
Perxion Posted June 7, 2021 Share Posted June 7, 2021 Does anyone know if Sentinel toy will be at this weekend's wonder fest? I can't find the location on the webpage map: http://sh.wonfes.cn/official/2021/［wf2021上海］观众入场指南疫情防控须知入场流线图/ Quote Link to comment Share on other sites More sharing options...
no3Ljm Posted June 7, 2021 Share Posted June 7, 2021 57 minutes ago, Perxion said: Does anyone know if Sentinel toy will be at this weekend's wonder fest? I can't find the location on the webpage map: http://sh.wonfes.cn/official/2021/［wf2021上海］观众入场指南疫情防控须知入场流线图/ I just checked that link and I didn't see Sentinel/千値練 listed. Quote Link to comment Share on other sites More sharing options...
RavenHawk Posted June 9, 2021 Share Posted June 9, 2021 On 6/6/2021 at 5:56 PM, tekering said: Apart from the five Invid figures already mentioned, MEP has also publicly displayed prototypes for: Khyron Azonia Exedore Dolza Miriya Nova Satori Marie Crystal Dana Sterling Maia Sterling M-32 Hover Cycle VF-8 Logan VHT-1 Hovertank Others have been mentioned on Facebook, but I don't count 'em until physical prototypes have been confirmed... ...but yeah, you're not looking hard enough. That's right, I remember those last three. I missed those figures, though. On 6/6/2021 at 5:56 PM, tekering said: ...but yeah, you're not looking hard enough. I'm going to tell myself that I didn't MISS them, I just didn't care enough to notice... (because, you know, niche collecting over here) Quote Link to comment Share on other sites More sharing options...
Podtastic Posted June 11, 2021 Share Posted June 11, 2021 Ok preordered another 10 "oversize" Gurabs. I'm justifying this by the fact that I need my Zentraedi to be heavily outnumbered, but this is my limit. Come on rest of the fandom Quote Link to comment Share on other sites More sharing options...
SoLoBoY Posted June 14, 2021 Share Posted June 14, 2021 On 6/4/2021 at 2:43 PM, sh9000 said: MEP on FB. Thx! Quote Link to comment Share on other sites More sharing options...
sh9000 Posted June 16, 2021 Share Posted June 16, 2021 MEP. Quote Link to comment Share on other sites More sharing options...
Podtastic Posted June 17, 2021 Share Posted June 17, 2021 On 6/16/2021 at 5:16 PM, sh9000 said: MEP. These are the tiny ones. Are you in for any of the larger? Quote Link to comment Share on other sites More sharing options...
vladykins Posted June 17, 2021 Share Posted June 17, 2021 I got one larger one but I'm one of the few so far. Quote Link to comment Share on other sites More sharing options...
roboemo Posted June 19, 2021 Share Posted June 19, 2021 https://mospeada.fandom.com/wiki/Earth_Liberation_Forces So I finally collected and compiled uniforms along with inferences. Mostly inconsistent, but might get enough reference for homebrew model makers or artists. Also maybe a little bit of lore too. Quote Link to comment Share on other sites More sharing options...
jorawar_b Posted June 21, 2021 Share Posted June 21, 2021 picked up my first Sentinel Alpha, love it, wonder if they will make a Beta? Quote Link to comment Share on other sites More sharing options...
vladykins Posted June 21, 2021 Share Posted June 21, 2021 @jenius noted in his review that they look like they have attachment points on the leg for a tread, along with the display arm for fighter mode looking like a tread connection. But nobody has seen any prototypes and such yet. I'll be happy just to get an indication of PO for the Houquet ride armor soon. Quote Link to comment Share on other sites More sharing options...
mantisfists Posted June 22, 2021 Share Posted June 22, 2021 I'm in for a few each of the 1/48 scale MEP Toys figures. The larger one is just too small for what I'd want it for, which would be for the Sentinel ride armors. If they upscaled it a bit to scale with those, I'd be in for a few of that one as well. Quote Link to comment Share on other sites More sharing options...
Podtastic Posted June 22, 2021 Share Posted June 22, 2021 3 hours ago, mantisfists said: I'm in for a few each of the 1/48 scale MEP Toys figures. The larger one is just too small for what I'd want it for, which would be for the Sentinel ride armors. If they upscaled it a bit to scale with those, I'd be in for a few of that one as well. Well its not going to happen if they cant even get 200 orders to justify the 167mm. The 176mm typo size (closest to 190mm) would have suited me better than 167mm (too small) or 209mm (too large), but I could use either in a pinch. The 1/48 is pretty much a useless size for a toy, its way too small a toy to pit against even the Revoltech Regults. Quote Link to comment Share on other sites More sharing options...
mantisfists Posted June 22, 2021 Share Posted June 22, 2021 (edited) 9 hours ago, Podtastic said: Well its not going to happen if they cant even get 200 orders to justify the 167mm. The 176mm typo size (closest to 190mm) would have suited me better than 167mm (too small) or 209mm (too large), but I could use either in a pinch. The 1/48 is pretty much a useless size for a toy, its way too small a toy to pit against even the Revoltech Regults. I disagree with this completely. The Gurabs weren't that big. Size charts confirm it. I love scale accuracy and having them like that reminds me how small they were. It's why I like the Sentinel toy size. It confirms to me just how tiny an aircraft the Legioss was in comparison to Yamato or Bandai's 1/48 VF-1s. There are larger Inbit mecha.....it's just not the Gurab or scout for that matter. I think it would, however, be cool to have a Gurab or scout at a scale that goes with the Sentinel or Beagle ride armors. I realize the size makes the Gurab underwhelming on their own. But their danger was never as individuals but more in swarms, hence getting more than a few. It also makes the poseable figures and bikes included with the Sentinel Legioss all the more viable now that they'd have enemies to pose with. Just my opinion, anyway. Edited June 22, 2021 by mantisfists Quote Link to comment Share on other sites More sharing options...
Podtastic Posted June 22, 2021 Share Posted June 22, 2021 3 hours ago, mantisfists said: I disagree with this completely. The Gurabs weren't that big. Size charts confirm it. I love scale accuracy and having them like that reminds me how small they were. It's why I like the Sentinel toy size. It confirms to me just how tiny an aircraft the Legioss was in comparison to Yamato or Bandai's 1/48 VF-1s. There are larger Inbit mecha.....it's just not the Gurab or scout for that matter. I think it would, however, be cool to have a Gurab or scout at a scale that goes with the Sentinel or Beagle ride armors. I realize the size makes the Gurab underwhelming on their own. But their danger was never as individuals but more in swarms, hence getting more than a few. It also makes the poseable figures and bikes included with the Sentinel Legioss all the more viable now that they'd have enemies to pose with. Just my opinion, anyway. Hello @mantifists You arent disagreeing with anything really. I know the official canon scales and I reject them in favour of my own which have absolutely nothing (mostly) to do with anything but my own desires. My preferred scale (please nobody have a canon-attack) would be something roughly like this. Human marine in middle. The OS Invid Project was probably the closest I would have gotten to a toy at least close to this scale. Quote Link to comment Share on other sites More sharing options...
mantisfists Posted June 22, 2021 Share Posted June 22, 2021 1 hour ago, Podtastic said: Hello @mantifists You arent disagreeing with anything really. I know the official canon scales and I reject them in favour of my own which have absolutely nothing (mostly) to do with anything but my own desires. My preferred scale (please nobody have a canon-attack) would be something roughly like this. Human marine in middle. The OS Invid Project was probably the closest I would have gotten to a toy at least close to this scale. I get what you're saying. I think what I disagreed with was you saying that 1/48 scale was a useless size for this toy when what you meant was 1/48 was a useless scale for you. For what it's worth, I do hope they make the larger version as more options are always better. Personally, for me though, it doesn't make sense to shell out for a scale that's in between the two scales I'd like, even if it meant getting the larger scale built. That would essentially double the cost for the larger scale I really want. Quote Link to comment Share on other sites More sharing options...
Big s Posted June 22, 2021 Share Posted June 22, 2021 Definitely oversized by a long shot Quote Link to comment Share on other sites More sharing options...
tekering Posted June 22, 2021 Share Posted June 22, 2021 (edited) 34 minutes ago, Big s said: Definitely oversized by a long shot Mospeada fans be like: @Podtastic be like: Edited June 22, 2021 by tekering Quote Link to comment Share on other sites More sharing options...
Podtastic Posted June 23, 2021 Share Posted June 23, 2021 7 hours ago, tekering said: Mospeada fans be like: @Podtastic be like: Quote Link to comment Share on other sites More sharing options...
Mechapilot77 Posted July 7, 2021 Share Posted July 7, 2021 On 2/11/2020 at 3:50 PM, Ignacio Ocamica said: But those are some 1/20 new kits, not the B2Five's. The B2Five's are these (and look infinitely better): Not to mention the R word but apparently toynami is releasing theses statesides R branded. BBTS just sent me an e-mail about new cyclones from toynami and i think they are these guys rebranded. https://www.bigbadtoystore.com/Product/VariationDetails/169667 did these guys ever get a mospeada branded release? Quote Link to comment Share on other sites More sharing options...
no3Ljm Posted July 7, 2021 Share Posted July 7, 2021 23 minutes ago, Mechapilot77 said: Not to mention the R word but apparently toynami is releasing theses statesides R branded. BBTS just sent me an e-mail about new cyclones from toynami and i think they are these guys rebranded. https://www.bigbadtoystore.com/Product/VariationDetails/169667 did these guys ever get a mospeada branded release? This is the first time we're going to see this in color. I don't remember B2Five put those Mospeada figures on PO on their website prior of this BBTS post. At 1/28 scale, 2.5in figures, this sample photos looks cool. Scott - $54.99 https://www.bigbadtoystore.com/Product/VariationDetails/169667 Lance - $54.99 https://www.bigbadtoystore.com/Product/VariationDetails/169662 Rand - $54.99 https://www.bigbadtoystore.com/Product/VariationDetails/169668 Quote Link to comment Share on other sites More sharing options...
Ignacio Ocamica Posted July 7, 2021 Share Posted July 7, 2021 These do look cool!!! Might give them a try! Quote Link to comment Share on other sites More sharing options...
vladykins Posted July 7, 2021 Share Posted July 7, 2021 I POed them. Considered POing two each for the modes, but may wait to see if B2.FIVE put up theirs too (if I don't have to buy Toynami-labeled crap twice, I'd prefer that). Quote Link to comment Share on other sites More sharing options...
Tober Posted July 7, 2021 Share Posted July 7, 2021 I'm passing until I see Houquet/Rook. Quote Link to comment Share on other sites More sharing options...
sqidd Posted July 7, 2021 Share Posted July 7, 2021 1 hour ago, no3Ljm said: This is the first time we're going to see this in color. I don't remember B2Five put those Mospeada figures on PO on their website prior of this BBTS post. At 1/28 scale, 2.5in figures, this sample photos looks cool. Scott - $54.99 https://www.bigbadtoystore.com/Product/VariationDetails/169667 Lance - $54.99 https://www.bigbadtoystore.com/Product/VariationDetails/169662 Rand - $54.99 https://www.bigbadtoystore.com/Product/VariationDetails/169668 2.5" figures? I could use 2.5"..............but not in my figure collection. Quote Link to comment Share on other sites More sharing options...
no3Ljm Posted July 7, 2021 Share Posted July 7, 2021 17 minutes ago, sqidd said: 2.5" figures? I could use 2.5"..............but not in my figure collection. Hahaha! Don't worry. I didn't PO. Too small for me and I'm already happy with my 2 Beagle's and the recent Sentinel Ride Armors. Quote Link to comment Share on other sites More sharing options...
Big s Posted July 8, 2021 Share Posted July 8, 2021 I actually think these look cool. I’m surprised that they came up stateside first, I thought for sure they’d be in Japan and get rebranded a couple months down the line Quote Link to comment Share on other sites More sharing options...
lavinrac Posted July 8, 2021 Share Posted July 8, 2021 Wow. Without being mean too much.. the math.. nope. $55 plus shipping. 2.5 in tall? And (R) branding? Nah. I bought a 2 sentinel legioss, and all but 1 dx chogokin valkyrie. But. At some point the part of my mind that yells “Stoopid!” At the other part of my mind that says “shiny collectible” .. that yelling part sometimes WINS. Maybe they will be perfect transformable. Maybe they will be amazing. But that is way tinier than those way simpler Gakken ones we still managed to break. That many Joints that size and …time.. are enemies. Your mileage may vary Quote Link to comment Share on other sites More sharing options...
jenius Posted July 8, 2021 Share Posted July 8, 2021 Simplified MegaHouse Ride Armors in a smaller size? These promise very limited articulation with the possibility of a very fidgety experience... yeah but I'll get 'em. Quote Link to comment Share on other sites More sharing options...
Convectuoso Posted July 8, 2021 Share Posted July 8, 2021 Ridiculously expensive for their size Quote Link to comment Share on other sites More sharing options...
Big s Posted July 8, 2021 Share Posted July 8, 2021 I do think the transformation is a simplified one. Maybe part swapping. There are a lot of pegs and maybe things just pop into place or do a simple fold. Honestly it’s hard to tell from the pics Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.