Jump to content

Bandai DX Chogokin 1/48 VF-1


IXTL

Recommended Posts

31 minutes ago, jvmacross said:

So the idea being illustrated by a wallet getting obliterated by an Itano Circus is too subtle? :unknw:

It just fits the part where it cuts to him and his lips move.

but yeah, it’s such a terrible idea that the one who suggested it should be chastised :p

 

As for preorder day, I saw someone mention June 3 is supposed to be Bandai Day and a bunch of preorders are going up including Dairugger, DX 1S, SHF stuff...no idea how reliable the person who mentioned it is with this info. 

Link to comment
Share on other sites

5 minutes ago, Slave IV said:

As for preorder day, I saw someone mention June 3 is supposed to be Bandai Day and a bunch of preorders are going up including Dairugger, DX 1S, SHF stuff...no idea how reliable the person who mentioned it is with this info. 

Yeah, I'm thinking the pre-order for this might be June 3rd, which is also my son's expected due date...

But either of those things are open to change. :p

Link to comment
Share on other sites

2 minutes ago, HardlyNever said:

Yeah, I'm thinking the pre-order for this might be June 3rd, which is also my son's expected due date...

But either of those things are open to change. :p

Haha, if it is June 3, at least you know you will be up late no matter what (unless you pass out early):D

Link to comment
Share on other sites

1 hour ago, jvmacross said:

So the idea being illustrated by a wallet getting obliterated by an Itano Circus is too subtle? :unknw:

Hikaru blasted the wallet, as the wallet dodged the circus. 

I.e. You can run but you can't hide from a fully tampoed 1/48 VF-1S blasting your wallet to smithereens. 

Ok. Ahem. Carry On.

Edited by seti88
Link to comment
Share on other sites

On 5/23/2019 at 4:08 AM, eXis10z said:

Can't tell on my mobile but supposedly higher res scans. 

E21F8EB4-0929-4A45-B61C-C02887ABDA65.jpeg

465DCE33-457E-4060-A079-637B3717FDA5.jpeg

E849338B-F187-4F07-A516-0EA84D392AAA.jpeg

31537499-0A6D-481A-9A04-EDD142D5D642.jpeg

This is me getting excited after seeing this annoucement:

tenor.gif

And this is me after seeing that announcement only to realize the never-ending spending:

tumblr_ms2txl9IU31sf2r8jo1_400.gif

:rolleyes:

21 hours ago, Slave IV said:

@no3Ljm

Hope you don't mind, the suggester modified the gif with three versions:

White Subtitles

fnZQPMa.gif

:D

The white subtitle has my approval. :good:^_^

21 hours ago, HardlyNever said:

Got one for the Hikaru VF-1S:

qkakKJ1.gif

Ha! The most appropriate one since it's the actual Hikaru VF-1S destroying a wallet. ^_^ Nice one! :good:  

3 hours ago, Anomaly said:

70999596_DX_ChogokinVF-1S(Hikaru)-Adv-Fr-Magz-2.jpg.bb253f444deb016120f9918a501b1326.jpg

 

1926844229_DX_ChogokinVF-1S(Hikaru)-Adv-Fr-Magz-1.jpg.c6249e3a6727f5a766d41e5f372bb54f.jpg

Oh so lovely. With all those tampos, I think this will be a great 'Ultimate Premium Finish' centerpiece display. :wub:

Only one more Hikaru Valk and I'm ready to stop this line. ;) 

23 hours ago, wmkjr said:

Valk looks nice. Slight price increase though not too bad. Interesting that the strike canon has an extension to make it flatter.

Hey wmkjr. The YamArcadia also have that extension feature on their Strike Cannon Booster.

1 hour ago, jvmacross said:

So the idea being illustrated by a wallet getting obliterated by an Itano Circus is too subtle? :unknw:

C'mon now JVM. :lol: 

giphy.gif

 

Edited by no3Ljm
Link to comment
Share on other sites

Ok. I just started comparing the fighter side profile equipped with packs against the YamArcadia and Hasegawa kits since I kind of got bothered on how gappy the section between the back plate to the packs compared with the other models. And not sure if the back plate really need to be recessed like that when the packs are equipped.

*Middle photo courtesy of @jenius 's Anymoon site.

dx_1-48_VF1S_hikaru.jpg.3cebf212e9115cf2a80bc61a7e918a06.jpg

 

Link to comment
Share on other sites

3 minutes ago, jvmacross said:

:friends:

Planning on adding this to your museum, JVM? How many if ever? Like my plan on these 1/48 line, I'm sticking with two. Can't wait for Bandai to finish it with Hikaru's VF-1A esp with slight modification to Max's 1A head. It's a done deal. ;) 

 

Link to comment
Share on other sites

26 minutes ago, no3Ljm said:

Ok. I just started comparing the fighter side profile equipped with packs against the YamArcadia and Hasegawa kits since I kind of got bothered on how gappy the section between the back plate to the packs compared with the other models. And not sure if the back plate really need to be recessed like that when the packs are equipped.

*Middle photo courtesy of @jenius 's Anymoon site.

dx_1-48_VF1S_hikaru.jpg.3cebf212e9115cf2a80bc61a7e918a06.jpg

 

It looks like the Bandai toy has been photoshopped in that scan... there's a big step down at the chest that doesn't exist on the toy. 

Link to comment
Share on other sites

It definitely could be a bad photoshop job.  But I noticed nothing really locks the back plate in place on the DX 1/48, even in fighter mode (it can only go so far, but there is definitely room for it to move).  So it may have fell down, and they didn't correct it, and took a picture of it.  Or worse, there is something about the super pack that requires it being recessed like that.

Link to comment
Share on other sites

1 hour ago, jenius said:

It looks like the Bandai toy has been photoshopped in that scan... there's a big step down at the chest that doesn't exist on the toy. 

It's the backplate cover with the antennas that's been pushed down too much.

When level the space will be less.

Link to comment
Share on other sites

2 hours ago, no3Ljm said:

This is me getting excited after seeing this annoucement:

tenor.gif

And this is me after seeing that announcement only to realize the never-ending spending:

tumblr_ms2txl9IU31sf2r8jo1_400.gif

:rolleyes:

The white subtitle has my approval. :good:^_^

Ha! The most appropriate one since it's the actual Hikaru VF-1S destroying a wallet. ^_^ Nice one! :good:  

Oh so lovely. With all those tampos, I think this will be a great 'Ultimate Premium Finish' centerpiece display. :wub:

Only one more Hikaru Valk and I'm ready to stop this line. ;) 

Hey wmkjr. The YamArcadia also have that extension feature on their Strike Cannon Booster.

C'mon now JVM. :lol: 

giphy.gif

 

:lol::good:

Link to comment
Share on other sites

Were the UNSpacy on the leg packs supposed to be backwards as per hase and yamcardia? I forget...

I can vaguely remember the discussion before for the gunpod unspacy orientation but can’t recall if anything was discussed for the leg packs..

Link to comment
Share on other sites

1 hour ago, seti88 said:

Were the UNSpacy on the leg packs supposed to be backwards as per hase and yamcardia? I forget...

I can vaguely remember the discussion before for the gunpod unspacy orientation but can’t recall if anything was discussed for the leg packs..

The photos are just flipped to give a consistent comparison. :lol:  No reason for the lettering to be backwards.

But yeah, there's no photoshopping or major gap there.  The back panel on the DX VF-1 can easily be pushed in.  The "resting" position can actually be tweaked a little by adjusting the fold-out locking mechanism hidden under it.  The rearward antenna is even spring-loaded to allow the backpack to get closer, so there should be plenty of clearance for that back panel to be pushed up flush with the chest plate.

I am really glad to see the boosters will have more support than just locking into the backpack though.  The position looks good, and really happy to see the DX won't have the same issues that the Yamato 1/60 did with the bending tails and scratched paint.

Edited by Chronocidal
Link to comment
Share on other sites

Well the trap door on the back could just be that it was mis-transformed.

What really irks me is the use of the crossbar to support the booster and strike weapon. It’s just looks so uninspired.

Plus, I think there could have been a much more elegant solution made for the arm attachments. I have always disliked those tabs. They seem to break up the flow of the arms and arm armor.

Oh well, that won’t stop me from buying at least one.

 

Link to comment
Share on other sites

5 hours ago, no3Ljm said:

Planning on adding this to your museum, JVM? How many if ever? Like my plan on these 1/48 line, I'm sticking with two. Can't wait for Bandai to finish it with Hikaru's VF-1A esp with slight modification to Max's 1A head. It's a done deal. ;) 

 

Yep....wish it were a combo set instead....will try for 3....will be ok with 1....really like the sculpt on the -1S head....wonder if they will do a TV and DYRL Roy...can’t tell if the “white” color is any different from the Hikaru -1J

Link to comment
Share on other sites

Just now, jvmacross said:

Yep....wish it were a combo set instead....will try for 3....will be ok with 1....really like the sculpt on the -1S head....wonder if they will do a TV and DYRL Roy...can’t tell if the “white” color is any different from the Hikaru -1J

If they're going to share that same 'white' color, I'll die happy. :good:

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...