Jump to content

Bandai DX Chogokin 1/48 VF-1


IXTL

Recommended Posts

2 minutes ago, Ipsquitch said:

No, your correct, I just typed it backwards. The problem with trying to work, F5 different sites for a cancelled order, and make a coherent forum post... Something had to give. haha

Oh right yeah I'm with you.  Got up early as well (up since 3:15 Eastern - not as early as the main party here), but a slow day at work for me fortunately. 

Link to comment
Share on other sites

23 minutes ago, slide said:

So the question becomes: what's better for business?

1) Driving demand Via Artificial Scarcity [scalpers + limited production run] then, potentially, your customers getting pissed at you and voting with their wallets AGAINST you. While, admittedly, succeeding in selling your set amount of units? [ie: assuming future risk for no potential extra gain]

-OR-

2) Netting some good PR, While Maximizing Profit + potentially moving more units than you thought, and Satisfying your Customers [including retailers]... all at once?

 

As a Corporation, Maximization of Profit being the goal, nothing but option 2 makes sense... at least to me.

Your theory works as long as it is a single line.  Bandai, even big as it is, has limits to what it can produce.  If they go ahead with a Macross product, they are sacrificing production line capacity for other lines.  My bet is they know exactly how many VF-1As they can produce and remain profitable and the negative PR be damned.  If they impact the other lines, they will probably face a bigger backlash than anything the meagre Macross fandom can produce.

Link to comment
Share on other sites

Just now, no3Ljm said:

What Gundam fans? :ph34r:

 

Hahahaha!

I have been a gundam fan for a long time, as well as a fan of the transformers masterpiece line.  While Gundam mecha has beautiful and extremely detailed sculpt and articulation, most of them don't transform and even when they do (zeta/zz/etc) the non-robot mode always look "forced".  Transformers on the other hand, feels more like a kids toy and a lot of the transformation gimmicks are needed to account for "anime magic", and the resulting sculpt and lines aren't as refined as Valkyries. 

To me, valks strike the perfect balance between decent forms (in both fighter and battroid modes, in most cases), great articulation (I'm looking at you, VF-4, with the fixed shoulders, as the only exception), and the pristine finish to them as a figure for grown ups, not just a toy.  It's a shame that valks are not more widely appreciated by the market, which could have increased production volumes and our chances of securing these GD preorders...

Link to comment
Share on other sites

4 minutes ago, Bolt said:

They lurk around every corner..:ph34r:

3 minutes ago, rdrunner said:

Hahahaha!

I have been a gundam fan for a long time

Same here. :ph34r: But I'm no lurker. :rolleyes:

3 minutes ago, Sanity is Optional said:

Mess with my GFFMC wing zero and it's on :aggressive:.

I'm not a big fan of Wing Zero so it's definitely on. :p

 

Link to comment
Share on other sites

32 minutes ago, no3Ljm said:

True. But that's in DYRL. Not on SDFM series. ;) 

 

 

We should probably rephrase the original statement.  For starters, Kakizaki had the same initial "A" rating as Max in SDFM.  He got taken out by bad luck in SDFM.  As far as DYRL, we should say that "You needed someone like Milia to take out Kakizaki." :yahoo:

Edited by DewPoint
Always typos!
Link to comment
Share on other sites

3 minutes ago, DewPoint said:

We should probably rephrase the original statement.  for starters, Kakizaki had the same initial "A" rating as Max in SDFM.  He got taken out by bad luck in SDFM.  As far as DYRL, we should say that "You needed someone like Milia to take out Kakizaki." :yahoo:

Bad luck in SDFM for sure,  still portrayed as a bit of a buffoon. In DYRL he didn’t even see it coming..

Edited by Bolt
Link to comment
Share on other sites

1 hour ago, gingaio said:

Also, I don't know how many more of these nights I have in me. I feel like a punch-drunk fighter in the morning. 

So tired at work today, too! I regret staying up for nothing. So bummed out about this. All because a bunch of a-holes want to make a few bucks...

Link to comment
Share on other sites

1 minute ago, Bolt said:

I can’t see why they wouldn’t release the Kakizaki version. Wouldn’t make sense not to.

To me it's not a question of if, but when.  It would make the most sense to issue that next to complete the Vermillion squadron, but I think we can never predict Bandai...

Link to comment
Share on other sites

2 minutes ago, RED WOLF said:

Does this mean once it's in stock I'll automatically get one? Or do have to keep on trying to check out?

 

 

20190408_133356.jpg

If you ordered it, yeah.

They won't let you check out if they don't estimate having enough stock. From that phone pic it looks like you did not check out, only managed to get it into your cart.

 

The fact their website errors sometimes and over-sells (causing them to cancel orders), is something else.

Edited by Sanity is Optional
Link to comment
Share on other sites

1 minute ago, RED WOLF said:

Does this mean once it's in stock I'll automatically get one? Or do have to keep on trying to check out?

20190408_133356.jpg

No. There's no guarantee. In order for it to show up in your PW is when you receive a confirmation email that you did have it in order. Besides, your order will not go thru since there's a red warning above.

 

Link to comment
Share on other sites

Just now, Sanity is Optional said:

Remember, the larger strategy decisions aren't made just in regards to Macross, but the whole DX Chogokin line (of which macross is only a part of) and their premium lines in their entirety (Chogokin, Metal Build, the various Fix Figuration/Metal Composite/etc...).

I don't collect anything Toy-wise outside MAcross, so I have no idea how expansive this particular line of pruducts truly is, however one would think a data-driven approach would solve any such problems/uncertainty-of-demand across their entire business model... but hey, who am I to tell them how to run their [obviously successful] business?:D


 

Quote

 

In a lot of those cases, there's more or less competition, or no competition at all.

 

Just now, slide said:

...Bandai are making a bigger, sturdier, CHEAPER VF-1 than Arcadia, with new versions are coming out faster/more consistent... so Bandai's winning..

Again, just comparing within an arena I know.

 

 

Quote

 

Also part of the risk adverseness comes down to the shops too, they'd much rather get a shipment that flies off the shelves, than one that sits. Which gives Bandai better leverage over MSRP and distributor pricing.

 

[again, back to theory] Is it not, in fact, the shops themselves who should be most worried?

Bandai gonna make collectibles, [at least some] Fans gonna buy collectibles...

If Bandai decided they'd like to bring-in 100% of MSRP* from a release, they can simply use the internet to Cut-out the middle-men. My understanding is they already do this with P-Bandai releases [though not for this reason]. Bandai's price [whatever they say it is] becomes MSRP, everything else is a markup.
Surely, there could be no better Leverage than that?

 

In my method the stores know exactly how many they will need for POs, and the choice of risking more capitol on in-hand-copies is up to them, don't have to if they're happy with their cut of the PO's.

The Potential for Certainty goes all around!;)

 

*of course, it would be boorish to throw-your-weight-around and burn bridges with shops/distributors like that, which would likely be a bad move...

Link to comment
Share on other sites

5 minutes ago, slide said:

[again, back to theory] Is it not, in fact, the shops themselves who should be most worried?

 Bandai gonna make collectibles, [at least some] Fans gonna buy collectibles...

 If Bandai decided they'd like to bring-in 100% of MSRP* from a release, they can simply use the internet to Cut-out the middle-men. My understanding is they already do this with P-Bandai releases [though not for this reason]. Bandai's price [whatever they say it is] becomes MSRP, everything else is a markup.
Surely, there could be no better Leverage than that?

 

In my method the stores know exactly how many they will need for POs, and the choice of risking more capitol on in-hand-copies is up to them, don't have to if they're happy with their cut of the PO's.

The Potential for Certainty goes all around!;)

 

*of course, it would be boorish to throw-your-weight-around and burn bridges with shops/distributors like that, which would likely be a bad move...

As I understand it, at least for Bandai's gunpla lines, Bandai decided what spread of kits to provide. Bandai decides that the retailers get a 5:1 (example numbers) split between MG and HG, and what the distribution of HG/MG is for instance. The shop just determines how large an order they're getting.

Very different distribution arrangement.

Edited by Sanity is Optional
Link to comment
Share on other sites

38 minutes ago, rdrunner said:

Hahahaha!

I have been a gundam fan for a long time, as well as a fan of the transformers masterpiece line.  While Gundam mecha has beautiful and extremely detailed sculpt and articulation, most of them don't transform and even when they do (zeta/zz/etc) the non-robot mode always look "forced".  Transformers on the other hand, feels more like a kids toy and a lot of the transformation gimmicks are needed to account for "anime magic", and the resulting sculpt and lines aren't as refined as Valkyries. 

To me, valks strike the perfect balance between decent forms (in both fighter and battroid modes, in most cases), great articulation (I'm looking at you, VF-4, with the fixed shoulders, as the only exception), and the pristine finish to them as a figure for grown ups, not just a toy.  It's a shame that valks are not more widely appreciated by the market, which could have increased production volumes and our chances of securing these GD preorders...

This...all of it. 

Link to comment
Share on other sites

Now that I'm committed to at least the Vermillion Squadron and a Roy DX, I'm thinking real hard about slowing down on the robot spirit line to make sure there is enough space for the giants. Lol I love my robot spirit Gundams and they are so fun to play with, but Macross toys are such delightful pieces of art to own :) Each Macross toy I can appreciate and view as a unique masterpiece on it's own.

IMG_20190408_162008.jpg

Link to comment
Share on other sites

Regarding the whole business aspect and Bandai, here is my take:

I don't think it's an example of Bandai being bad at recognizing demand. I think it's just another case of limited resources for a company that makes thousands of products with varying degrees of profitability. No matter what anyone thinks, these are still high end niche markets and relatively, there are not many people who want to spend around $200+ on a toy robot. Some of those who do want it and are pissed that they haven't been able to get one should blame retailers with inadequate online store programming and themselves for not being on the ball enough before they blame Bandai...IMO.

Also, I will reiterate that I don't think Bandai is miscalculating anything...at least not by as much as we all hope to think. They are an international corporation with bean-counters whose calculations are most likely telling them it's more profitable to produce other items instead of more of these high end niche items. It's great for business when all your high end items sell out instantly and you have no extra stock clogging the shelves. Each unsold SOC or DX item costs more to make and to store because of the size and parts count. Selling more small, cheap items at a higher margin means more profit and less potential loss.

It is simple, ruthless business just as people are hoping for but some people seem to be letting their own desire for Macross toys cloud their thoughts on how business works. It's all about the bean counters!

Regarding the demand for Max's SDFM 1A:

  1. The success of the DX 1J - The overall satisfaction reported with it being regarded as the best overall Valk made to date and the first new design in about a decade all make the appeal greater to collectors and scalpers.
  2. The SDFM Max 1A has not had a quality release since the Yamato days. Max is probably a lot of people's favorite pilot since he was THE MAN and like me, itching to get his original Valk.

We've seen several versions of Hikaru's 1J released in recent years...1/60, 1/100 (2 types), 1/48. Max's 1A hasn't been released in any form by anyone reputable (Yamacadia/Bandai) for 10 years.

Link to comment
Share on other sites

 

Just now, Sandman said:
Just now, SpaceCowboy said:

I'm writing Bandai to let them know how shitty this is.  No good complaining on here.  Let them know.

Got an email address for Bandai?

Nah, you gotta go Full-Canadian and write a physical letter!

 

If nothing else, they'll be surprised someone went to the trouble.

Link to comment
Share on other sites

3 hours ago, Shizuka the Cat said:

Oh yeah, I also pre-ordered the Arcadia VE-1 Premium Finish, when I already own 2 Elintseekers.  *sigh*

Radar domes are my kryptonite... as are apparently DX VF-1A TV Max  *double sigh*

Dude, you just made me spend 244.00 on NY for an Arcadia elintseeker. I didn’t even realize this was up for pre order.  I need to unsubscribe from these threads!

Link to comment
Share on other sites

4 minutes ago, Bahamutzyro said:

Dude, you just made me spend 244.00 on NY for an Arcadia elintseeker. I didn’t even realize this was up for pre order.  I need to unsubscribe from these threads!

I got someone to buy a valkyrie that they otherwise might not have purchased?

My work is done!  

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...