Your most recent Macross or toy purchase! General thread.

[chyll2]

per anymoon/jenius

Super Ostrich belongs to the AVOID list due to yamato defect on the shoulder. It is just a matter of time.

option now is to get shoulder replacement from Shapeways or try returning it

Edited September 25, 2014 by chyll2

[Gakken85]

Yeah, I've had valks on the list that didn't break. either way they should have listed it if they knew. If they didn't it's still damaged.

I called paypal and opened up a claim. We'll see. I'll have to eat the shipping but the replacement shoulder wouldn't be painted correctly, so I don't see how helpful that would be.

I'm not a hobby guy haha

Edited September 25, 2014 by Gakken85

[wmkjr]

I say if you really like it get the shoulder replacement on shapeways and replace it though it won't be the same color.

https://www.youtube.com/watch?v=YjHadh6lWdA. Does the VF-1D color match? Maybe you can hunt for a donor valk or assembly kit for an expensive option. If not, I'll be glad to take it off your hands .

Edited September 25, 2014 by wmkjr

[Gakken85]

Actually, No. Neither the beige on the valk or the orange match my VF-1 haha. The orange is redder and the beige is lighter.

[wmkjr]

Damn that sucks.

[Gakken85]

Yeah. We'll see how the claim with paypal goes. I could try to superglue it but I'm sure it would snap again eventually.

I'd rather eat the $30 bucks to mail it back and get my $300 buck than keep it and be unsatisfied with it.

I'll def. think twice before I buy anything used from Jungle haha

Edited September 25, 2014 by Gakken85

[xrentonx]

I'm sure someone here would buy it off you and Shapeways it themselves. I'd go that route.

[wmkjr]

Maybe they can use the full-color-plastic pilot material and color match. That would be awesome if it worked. To lazy to read the design specs.

[CoreyD]

When my VT-1's shoulders broke, I just picked up a cheap VF-1 30th valk. The black shoulders look pretty sharp on the Ostrich.

Figure you're gonna eat the $30 for shipping anyway and VT-1's aren't exactly easy to find.

[xrentonx]

I'm hoping for a reissue myself but if I already paid that much I wouldn't mind doing the Shapeways fix with the shoulders in black or grey. I think the contrast would look much better than the original. I get that it's not a look for everybody though.

[Gakken85]

The 30ths are cheap, but it's still 70 bucks. The shapeways link has a black option actually.

http://www.shapeways.com/model/463232/kanzen-henkei-1-60-scale-fighter-variable-hinge.html?materialId=25

IDK. Where do you get the pins?

I watched Veefs video but he seemed to take the whole thing apart.

I could just cannibalize my 30th... and pick up another sometime. It's not my favorite valk haha

Edited September 25, 2014 by Gakken85

[technoblue]

Ouch, Gakken! Those pictures bring back bad memories of my two unsafe Yamato Valkyries. When I replaced my shoulders, I reused the original hinges. You can file down the knurled end or cut it down slightly with a small pair of cutting pliers. The modified pin will still fit and will not deter the hinge in any way when you put the arm back together.

[valkfighter]

Hi gakken don´t give back that vt-1 you wont find another one later and if you do they are all broken. just repair it. if you need help repairing it just send me a pm and will tell you how step by step.

the vt-1 is the most precious thing in my collection your collection will not be the same without it. dont give it back JUST SAVE IT!!

[Gakken85]

Haha you guys are conviencing me to try this.

I'm a clumsy frakk

[Moosey]

Thank god for re-releases! Wanted this for ages.

[abbadon]

I would be bothered by it as well, but I agree that you should just try to repair it and put it in Fighter or Gerwalk mode. Soon you'll forget about the different color of shapeways part, and you'll still have that fabulous VT-1 on display to admire.

Edited September 25, 2014 by abbadon

[Gakken85]

I would be bothered by it as well, but I agree that you should just try to repair it and it in fighter mode or Gerwalk mode. Soon you'll forget about the different color of shapeways part, and you'll still have that fabulous VT-1 on display to admire.

Good point.

[spanner]

Oh, okay! We have some of those up here in the Great White North, but by no means all.

they look great! Gotta get me some of em!

[barurutor]

Another +1 for the shapeways fix

[Vagabond Elf]

September ended up being expensive for me - but this is all in now!

The Stealth is something I've been wanting for a while, and I found it for 19,440 shipped on Jungle. I was a bit nervous, never having done Jungle before, and that seemed to good to be true.... but now that it's here, I'm quite pleased. Everything seems intact. The box is worn and some stickers are applied, but that's fine. Only real problem is the tow bar likes to fall off the nosewheel - and he'll be in Battroid mostly anyway, so meh.

Wheeljack arriving the same day was just icing on the cake.

Today, I am pleased.

[happy_spike]

Thank god for re-releases! Wanted this for ages.

Oh that's cool, that just got added to my list...

[Gakken85]

Swindle looks good ELF

Edited September 25, 2014 by Gakken85

[Saburo]

The last 2 figures of this monster arrived today.

[ChaoticYeti]

The last 2 figures of this monster arrived today.

image.jpg

Nice. I have been looking at getting a 3rd party gestalt.

[Saburo]

Nice. I have been looking at getting a 3rd party gestalt.

Cool, which one are you considering?

Edited September 25, 2014 by Saburo

[ChaoticYeti]

Cool, which one are you considering?

I am a sucker for devastator. I am leaning towards the maketoys one.

[Guest davidwhangchoi]

sorry to break the discussion: my yf-30 and wheeljack made it today.

[Gakken85]

Saburo - That looks awesome! didn't know you collected 3P's too. How's the articulation in gestalt mode? does it feel floppy?

David - Are you going to open Wheeljack ?

Moosey - That model kit looks great. Wish that was a toy

Welp. I said frakk it and ZEE operation was an Succezzz!!! Zee patient is alive! ALIVE!

I tried to file down the original pin, and super glue the original shoulder, but it didn't quite work out. I ended up cutting the pin and it was too short to hold the weight right.

So, I cannibalized my VF-1J 30th. (Sorry Tenjin) and slapped the black shoulders on there. I have to say, and agree with Valk Fighter and CoryD the black looks nice. One of the VF-1J 30th sides was a bit loose on the pivot, but oh well. I test it and it locked in the battroid/gerwalk shoulder down position and swings fine.

I decided to just leave the arms off the 30th until I could buy a black shapeways to get it back to full functional deformation mode. It went back together without the arms and looks fine ... as good as it can look.. in fighter mode.

I guess you're not a real Macross fan until you take a VF-1 V2 apart and replace something It was a fun learning experience. Thanks to wmkjr, chyll2, xrentonx, CoreyD, technoblue, valkfighter, and abbadon for the help and encouragement!

Also thanks to veef for having those videos up.

Edited September 25, 2014 by Gakken85

[abbadon]

Cool! Glad it worked out for you and your VT-1!

Poor VF-1J though. It looks like it's in pain. Haha!

[Gakken85]

Haha. He's back on his cheap stand sans arms. He'll just have to fly in air shows for awhile and stay out of combat.

[Saburo]

I am a sucker for devastator. I am leaning towards the maketoys one.

I would definitely recommend the Maketoys Devastator. I have one and its my favorite of all my combiners.

sorry to break the discussion: my yf-30 and wheeljack made it today.

Nice! What are your thoughts on Wheeljack?

Saburo - That looks awesome! didn't know you collected 3P's too. How's the articulation in gestalt mode? does it feel floppy?

David - Are you going to open Wheeljack ?

Moosey - That model kit looks great. Wish that was a toy

Welp. I said frakk it and ZEE operation was an Succezzz!!! Zee patient is alive! ALIVE!

I tried to file down the original pin, and super glue the original shoulder, but it didn't quite work out. I ended up cutting the pin and it was too short to hold the weight right.

So, I cannibalized my VF-1J 30th. (Sorry Tenjin) and slapped the black shoulders on there. I have to say, and agree with Valk Fighter and CoryD the black looks nice. One of the VF-1J 30th sides was a bit loose on the pivot, but oh well. I test it and it locked in the battroid/gerwalk shoulder down position and swings fine.

I decided to just leave the arms off the 30th until I could buy a black shapeways to get it back to full functional deformation mode. It went back together without the arms and looks fine ... as good as it can look.. in fighter mode.

I guess you're not a real Macross fan until you take a VF-1 V2 apart and replace something It was a fun learning experience. Thanks to wmkjr, chyll2, xrentonx, CoreyD, technoblue, valkfighter, and abbadon for the help and encouragement!

Also thanks to veef for having those videos up.

Congratulations on the surgery being a success!

Thanks, I'll have studio pics of Feral Rex aka Predaking soon. I used to collect TFs but I stopped collecting TFs and sold a vast majority of my TF collection to focus on Macross instead. I still collect 3P Combiners.

The articulations for FR in gestalt mode is not bad. The arms don't have much range of motion due to the sheet size of his forearms and shoulders. The legs are pretty good, you can pose him in some dynamic stances. FR is something to see in person, he is massive. I haven't placed him next to the other Decepticon Combiners because he doesn't fit on the shelf where the others are located. I'll post pics of all them together on my flickr and facebook page.

Edited September 25, 2014 by Saburo

[Guest davidwhangchoi]

David - Are you going to open Wheeljack ?

Nice! What are you thoughts on Wheeljack?

i just threw him on top of the other mp cars that are sitting boxed up on my couch. the yf-30 is just sitting there as well. i'll get around to him eventually. i'm currently messing with a lenovo tab that just came in.

[mechaninac]

Yeah. We'll see how the claim with paypal goes. I could try to superglue it but I'm sure it would snap again eventually.

I'd rather eat the $30 bucks to mail it back and get my $300 buck than keep it and be unsatisfied with it.

I'll def. think twice before I buy anything used from Jungle haha

DO NOT use super glue; it'll make a mess and won't hold. That part is made of ABS so you should use plastic weld formulated for ABS:

• Enlarge the pivot-pin hole to alleviate stress and hold the broken pieces together, just touching;
• Dab a droplet of liquid weld to the gaps between the parts and let capillary action carry the solvent in;
• Clamp the part so that the the repair is stabilized and squeezed with constant pressure ( small vise, clamps, or clothes pin should do the trick) and look for a bit of melted plastic oozing from the join -- that's a good thing
• Let the part rest unmolested for about a day;
• Carefully scrape off with a hobby knife, or file down, or sand the now cured ridge of plastic that oozed out of the join so that the surfaces are flush.

If you do it right, it should be hard to tell that the hinge was ever broken at all.

[NOD]

Here are the latest additions to my 2-month collection :

[ChaoticYeti]

I would definitely recommend the Maketoys Devastator. I have one and its my favorite of all my combiners.

Nice. It has been awhile since I bought a transformer. I like the masterpiece stuff, but other than that I can't stand them anymore. They are pretty lazy, and no fun to transform. I have been trying to decide which third party to get to get me back into collecting TF. I've been looking at the 3p Devastator gestalts for a few years now. Maybe I can make a stand adapter...