Urashiman Posted July 7, 2022 Author Share Posted July 7, 2022 Hey everyone! I did a bunch of sanding and filling and "pre-panel lining" on the F-5B (CF-116). So this is where I am so far. I have been sanding and sanding and filling and sanding. Rinse and repeat. So I decided to spray the thing with the good old Tamiya surface primer to check for any stuff that needs even more sanding. And boy, the primer didn't fail me, but that #@%&$?! kit frustrates me. After all this sanding, there are still so many things to do. So much fun! Hahahahahah Quote Link to comment Share on other sites More sharing options...
Thom Posted July 7, 2022 Share Posted July 7, 2022 @Urashiman Just reiterate to yourself, like a mantra, 'I rebuilt the entire nose. I rebuilt the entire nose. I rebuilt the entire nose...' You got this! Quote Link to comment Share on other sites More sharing options...
arbit Posted July 7, 2022 Share Posted July 7, 2022 4 hours ago, Urashiman said: I did a bunch of sanding and filling and "pre-panel lining" on the F-5B (CF-116). So this is where I am so far. I have been sanding and sanding and filling and sanding. Rinse and repeat. Very nice photos of your staged progress. It feels like we are joining you on the ride. Hope you succeed to fix some of those in he next update. Quote Link to comment Share on other sites More sharing options...
derex3592 Posted July 7, 2022 Share Posted July 7, 2022 I LOVE that aircraft design so much, one of my all time favs! Looking forward to your progress! Quote Link to comment Share on other sites More sharing options...
Urashiman Posted July 7, 2022 Author Share Posted July 7, 2022 @Thom @arbit @derex3592 Thanks for the encouraging words. No worries, the adventure (much more sanding) will continue. But I got tired of that thing after sanding away and decided to work on the VF-1P a bit more. Here two renders fresh from the renderbakery. I am not too sure if I will leave the canopy like this. It looks a bit too much like the weird 80s Bandai kit canopy. Quote Link to comment Share on other sites More sharing options...
ahiachris Posted July 8, 2022 Share Posted July 8, 2022 Just started learnibg 3D drawing and printing. Bought the deck and elevator section stl file of the famous Prometheus. Planning Redrawing most of the files and adding details. The pictures shows the printed catwalk. The width of the thin bars you can see on the grille is 0.4 mm and the gap between is 0.30 mm. Quote Link to comment Share on other sites More sharing options...
MechTech Posted July 8, 2022 Share Posted July 8, 2022 (edited) @Thom Your ship mods are looking great! @derex3592 Those lights AND your skylights both look really nice (other wise your furry friend wouldn't be there)😁 @electric indigo Your primer looks SMOOTH. @Urashiman Despite all the flaws still on the surface, that is a VAST improvement over the original! You can do it! @ahiachris Those look cool! What type of mod are you doing? - MT Edited July 8, 2022 by MechTech Quote Link to comment Share on other sites More sharing options...
Urashiman Posted July 8, 2022 Author Share Posted July 8, 2022 (edited) @ahiachris Nice print! What resolution has you SLA printer? @MechTech Thanks a lot man! Working on the VF-1P again. I think I have the canopy right now. Took me a while to get the proper form. In the back, canopy v1, in the front canopy v3.14 (the one I am satisfied with). EDIT: Some progress from today. Panel lines in real life, as in virtual life are hard to carve, and take their time. Edited July 9, 2022 by Urashiman New stuff! Quote Link to comment Share on other sites More sharing options...
Thom Posted July 9, 2022 Share Posted July 9, 2022 (edited) I repositioned the RCS quads from the cut out panels to the new trialing edge of the saucer. A little messy but some CA and sanding with smooth that all out. That should have been done before the upper/lower saucer halves were glued together. And then I skinned the opening. The new shuttle bay doors will be in the 'corners' and will be the last panels to go in. Those doors will be inset, so I'll need to frame and add them before gluing those opening shut. More to come! Thom Edited July 9, 2022 by Thom Quote Link to comment Share on other sites More sharing options...
derex3592 Posted July 9, 2022 Share Posted July 9, 2022 @Urashiman - Your digital Valk is looking good! @Thom -Red Alert! Shields Up! Looking good! Over here this morning I tackled the forward and aft cargo area cleanup that's needed to happen for months now. Got that mostly sorted with skinny sanding sticks and a little good old fashioned hand painting with Tamiya acrylics believe it or not! I also got my forward and aft cargo covers finished and test fitted! Ever so slightly crinkled kitchen foil painted off white...looks like a canvas cover! With any luck we are going to get the bow and stern covers ON the ship tomorrow AM. Stay tuned! Quote Link to comment Share on other sites More sharing options...
Thom Posted July 9, 2022 Share Posted July 9, 2022 @derex3592 "USS Stingray to HMS Titanic, be advised Starfleet border command has had reports of Romulan activity in your area. We advise you check your speed and keep a look-out. Good luck. Love the 'canvas' covers. Real nice work, Quote Link to comment Share on other sites More sharing options...
derex3592 Posted July 9, 2022 Share Posted July 9, 2022 @Thom - "HMS Titanic to USS Stingray, all we've seen out here is a Klingon Bird Of Prey hovering over a fishing boat and some pesky little icebergs, nothing to worry about!" Quote Link to comment Share on other sites More sharing options...
pengbuzz Posted July 10, 2022 Share Posted July 10, 2022 2 hours ago, Thom said: @derex3592 "USS Stingray to HMS Titanic, be advised Starfleet border command has had reports of Romulan activity in your area. We advise you check your speed and keep a look-out. Good luck. Love the 'canvas' covers. Real nice work, 1 hour ago, derex3592 said: @Thom - "HMS Titanic to USS Stingray, all we've seen out here is a Klingon Bird Of Prey hovering over a fishing boat and some pesky little icebergs, nothing to worry about!" "Lost-3, this is Lost-1; are you Lost-2, over?" Quote Link to comment Share on other sites More sharing options...
Thom Posted July 10, 2022 Share Posted July 10, 2022 13 hours ago, pengbuzz said: "Lost-3, this is Lost-1; are you Lost-2, over?" And now I have the theme to 'Land of the Lost' in my head, so thanks. Quote Link to comment Share on other sites More sharing options...
pengbuzz Posted July 10, 2022 Share Posted July 10, 2022 5 hours ago, Thom said: And now I have the theme to 'Land of the Lost' in my head, so thanks. The original 1974 Kroft version, the 1991 remake series, or the 2009 movie? (hint: the first one was the best! ) Quote Link to comment Share on other sites More sharing options...
Big s Posted July 10, 2022 Share Posted July 10, 2022 3 hours ago, pengbuzz said: The original 1974 Kroft version, the 1991 remake series, or the 2009 movie? (hint: the first one was the best! ) The original is the best, I don’t remember the remake much and the goofy film had me laughing at times, mostly for the pure hatred towards Chaka. Quote Link to comment Share on other sites More sharing options...
Thom Posted July 11, 2022 Share Posted July 11, 2022 4 hours ago, pengbuzz said: The original 1974 Kroft version, the 1991 remake series, or the 2009 movie? (hint: the first one was the best! ) I think it's the og series theme. Don't remember a remake in '91, and thoroughly enjoyed the 2009 movie! Quote Link to comment Share on other sites More sharing options...
MechTech Posted July 14, 2022 Share Posted July 14, 2022 @Thom Your mods are looking good! @derex3592 You could have foiled me, the tarps look realistic😁 - MT Quote Link to comment Share on other sites More sharing options...
Bolt Posted July 15, 2022 Share Posted July 15, 2022 Everything is looking really awesome guys! Your talent and dedication is very much appreciated. I'm needing to get back to the work bench! Dang this real life stuff! Quote Link to comment Share on other sites More sharing options...
Urashiman Posted July 15, 2022 Author Share Posted July 15, 2022 It‘s putty time children! grey revell putty for the things that need more sanding. And then I noticed these giant gaps. Revell putty won’t help here. time for good old miliput! muhahaha! More stuff to sand away! Quote Link to comment Share on other sites More sharing options...
pengbuzz Posted July 15, 2022 Share Posted July 15, 2022 Looks like you're Mili-put-putting along nicely! 😛 Quote Link to comment Share on other sites More sharing options...
derex3592 Posted July 16, 2022 Share Posted July 16, 2022 PRO TIP that I wish I had known about an hour ago......When hand brushing Mr. Metal Primer onto a PE fret, DO NOT lay the fret on a piece of anything that you don't want the PE fret to be ATTACHED to! The damn primer dries quick and basically before I knew it had almost glued it to the damn cardboard sheet that came in the package with the PE. I managed to get it off but ruined some of the PE parts in the process...mind you this is the 2nd set of $20+ PE railings I have paid for...NEXT TIME I will definitely spend a little more $$$ and get the spray can of the Metal Primer and go that route.... Quote Link to comment Share on other sites More sharing options...
pengbuzz Posted July 16, 2022 Share Posted July 16, 2022 3 minutes ago, derex3592 said: PRO TIP that I wish I had known about an hour ago......When hand brushing Mr. Metal Primer onto a PE fret, DO NOT lay the fret on a piece of anything that you don't want the PE fret to be ATTACHED to! The damn primer dries quick and basically before I knew it had almost glued it to the damn cardboard sheet that came in the package with the PE. I managed to get it off but ruined some of the PE parts in the process...mind you this is the 2nd set of $20+ PE railings I have paid for...NEXT TIME I will definitely spend a little more $$$ and get the spray can of the Metal Primer and go that route.... If that ever happens again, try 91% alcohol to free it without harming the PE parts. Quote Link to comment Share on other sites More sharing options...
electric indigo Posted July 16, 2022 Share Posted July 16, 2022 Caw caw... Quote Link to comment Share on other sites More sharing options...
Big s Posted July 16, 2022 Share Posted July 16, 2022 1 hour ago, derex3592 said: PRO TIP that I wish I had known about an hour ago......When hand brushing Mr. Metal Primer onto a PE fret, DO NOT lay the fret on a piece of anything that you don't want the PE fret to be ATTACHED to! The damn primer dries quick and basically before I knew it had almost glued it to the damn cardboard sheet that came in the package with the PE. I managed to get it off but ruined some of the PE parts in the process...mind you this is the 2nd set of $20+ PE railings I have paid for...NEXT TIME I will definitely spend a little more $$$ and get the spray can of the Metal Primer and go that route.... Could try silicone baking sheets. The paints I’ve used don’t seem to stick to that stuff Quote Link to comment Share on other sites More sharing options...
derex3592 Posted July 17, 2022 Share Posted July 17, 2022 (edited) Good tips! In other news... @Urashiman inspired me to do this! Less than $13 shipped! Never built a Hobby Boss kit, but this will be a fun, quick (hopefully) after Titanic build before the Raptor. Edited July 17, 2022 by derex3592 Quote Link to comment Share on other sites More sharing options...
pengbuzz Posted July 17, 2022 Share Posted July 17, 2022 (edited) Edited July 17, 2022 by pengbuzz Quote Link to comment Share on other sites More sharing options...
Thom Posted July 18, 2022 Share Posted July 18, 2022 4 hours ago, pengbuzz said: Oh boy! I'm pulling up chair! Quote Link to comment Share on other sites More sharing options...
pengbuzz Posted July 18, 2022 Share Posted July 18, 2022 6 hours ago, Thom said: Oh boy! I'm pulling up chair! Thanks Thom! Now, I cannot promise anything with this, since my tooling is fairly limited and so is my materials supply. But as long as the ride goes, I'll be driving it! There's quite a bit of wood to remove, and sawdust makes my wife very ill (not to mention outside is a big no-no with our new property managers and the neighborhood already a bunch of punks!). All that said, we'll see if I have a ship at the end. Stay tuned... we may just be off to outer space... Quote Link to comment Share on other sites More sharing options...
Urashiman Posted July 18, 2022 Author Share Posted July 18, 2022 23 hours ago, derex3592 said: Good tips! In other news... @Urashiman inspired me to do this! Less than $13 shipped! Never built a Hobby Boss kit, but this will be a fun, quick (hopefully) after Titanic build before the Raptor. Haha! Great! Have fun! I hope it won't be as annoying as my F-5B (CF-116). Can you post pictures of the runners? Quote Link to comment Share on other sites More sharing options...
derex3592 Posted July 18, 2022 Share Posted July 18, 2022 @Urashiman Sure - I'll do that later on today after work. Did you ever build the old Testors 1:48 T-38 Talon? I remember I built that as a teenager with no skills and it was a horrible kit! Quote Link to comment Share on other sites More sharing options...
MechTech Posted July 18, 2022 Share Posted July 18, 2022 @Urashiman I hope you you smoothed that over with water before it dried. That will be fun to sand down (in a bad way). It's looking good though! @electric indigo Nice mod to the windscreen! @pengbuzz WOW! Talk about whittling down some wood! I look forward to seeing what you do with that! The hobby stuff has been slow. A lot of my spare time has been going to museum signage for the TACAMO organization guys. For the Spitfire, this is the second canopy. The first was badly cracked by solvents I didn't know would kill it. And the first pilot (for it too) I have done seriously in years! This is the OLD Monogram 1/72 Black plastic F-14 Tomcat snap-kit. Plane sucked, the pilot was cool and was kept over the decades. The visor is only Prismacolor silver pencil. Looks better in person. Also highlighted buckles with it too. The Spitfire needs an overcoat, but the humidity is too high right now. So I started a side project. This is for an upcoming light robot build. The model was cool, but as usual, the gun seemed to be an afterthought. So I drilled the holes out and made a steel barrel for it. Then a flash suppressor to make it look a little more cool. That's it for now. Thanks for checking in guys! - MT Quote Link to comment Share on other sites More sharing options...
derex3592 Posted July 18, 2022 Share Posted July 18, 2022 @wm cheng Jumpwind paints reviewed by Barbotos Rex over the weekend... These golds and iron colors have me wanting to try them out as either a base coat OR a very light top coat on the F-22 models! Reasonably priced as well! Quote Link to comment Share on other sites More sharing options...
wm cheng Posted July 18, 2022 Share Posted July 18, 2022 Cool @derex3592 - I just wished there was a pre-mixed with the grey solution. If you mist it, would you do it as an overcoat or under coat and mist the grey over top? Either way its a pretty risky and delicate paint job. My guess is misting over the top might leave metallic particles/flakes that would be too big / out of scale. Undercoat might be better but you have to work in both the lighter grey and darker grey without overlap on top. There are pearlescent pigments that can be added to the base paint/grey (like how they do Star Trek Enterprise aztec paneling). Maybe I'm just over-thinking it. The canopy has gold reflective finish too doesn't it? I'm thinking my F-22 kit might go to the bottom of my pile Quote Link to comment Share on other sites More sharing options...
Urashiman Posted July 18, 2022 Author Share Posted July 18, 2022 @derex3592 haha, sound horrible. But no, I only build a hand full of 1/48 kits. Most were WW2 planes and one F-14 I think. @MechTech no, I like it the hard way. Sanding until the fingers are bleeding. I hope this is done now. Will test prime that thing tomorrow. Let’s see if it is good now. Then it is time to carve panel lines and make a new canopy. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.