Jump to content

Ride Armors, Legioss and Treads! Oh my!

EXO

By EXO,
in Hall Of The Super Topics

 Share

Recommended Posts

blacklotus Skull Leader's Lackey

blacklotus

Posted
Posted
.. that's some good thinking there. :D But i'm gonna collect all the main characters for the MH ride armours though...

The Beagle Houquet would have to be sooo awesome! Hurry up beagle. Take my money.

I want all the Beagle ridearmor stuff too, but only if the quality is top notched. The scale's bigger, and the sculpt is more accurate. But at over US$250 per 20cm figure excluding EMS shipping, and with the recent global recession, I've to be more practical and stick to my budget and plan.

If I've not lost quite a bit of money in my investments, I might make the exception. Still, no point crying over spilt milk. ^_^

And I've still got plenty of cheaper, fixed posed castoffable figures to buy. Especially after the 2009 Feb WonderFest.

Link to comment
Share on other sites
protogarland Cannon Fodder

protogarland

Posted
Posted
http://www.google.com.sg/imgres?imgurl=htt...=image&cd=1

Was the GIANT ridearmor above ever made? I just come across this image. It's BIGGER than an Alpha fighter! :blink:

That looks like a re-cast from the 1980's Gakken transformable cyclone. It did find its way over to America in the mid and late 1980's under the Robotech brandname. I think Matchbox released it back then.

Link to comment
Share on other sites
blacklotus Skull Leader's Lackey

blacklotus

Posted
Posted
That looks like a re-cast from the 1980's Gakken transformable cyclone. It did find its way over to America in the mid and late 1980's under the Robotech brandname. I think Matchbox released it back then.

Thanks. I think this is the one my rich classmate has when I was still in secondary aka high school. It does bring back fond memories. ^_^

Link to comment
Share on other sites
Tober New Edwards Test Pilot

Tober

Posted
Posted
I want all the Beagle ridearmor stuff too, but only if the quality is top notched. The scale's bigger, and the sculpt is more accurate. But at over US$250 per 20cm figure excluding EMS shipping, and with the recent global recession, I've to be more practical and stick to my budget and plan.

If I've not lost quite a bit of money in my investments, I might make the exception. Still, no point crying over spilt milk. ^_^

And I've still got plenty of cheaper, fixed posed castoffable figures to buy. Especially after the 2009 Feb WonderFest.

I thought Wonderfest was in hiatus..?

There was an accident or something which shut it down... or did they sort it out?

Link to comment
Share on other sites
protogarland Cannon Fodder

protogarland

Posted
Posted (edited)

My beta fighter arrived today. I did a full-cycle transformation once. I am happy to report that the thing is sturdy. Yes, the legs are a bit loose at the hip joints. The way the battloid folds and collapses into fighter mode can cause minor disgruntlement if you don't have your hand firmly grasping the unit, but aside from that, it is solid. It feels solidly built, the way the Alpha should have felt. One caveat, in battloid, the legs can extend and the knees can bend. From what I can tell, that is only real weak spot. Even though the knees click when they bend, I can just see someone putting a bit too much pressure into it and breaking it.

I actually believe that because the Beta was intended to be an add-on to sell more toys, and that the designs weren't fully drawn like that of the Alpha, that the lack of details in the beta's design has helped to make the toy a lot stronger than the alpha. Since they don't have to go by detailed design sketches, they were free to look at the molds from other (sturdier perhaps?) model kits and create a toy that is solid. Like I said earlier, this is how the alpha fighter should have been constructed in the beginning.

I have not tried to link it up yet but I will soon.

Edited by protogarland
Link to comment
Share on other sites
Phyrox Bridge Bunny

Phyrox

Posted
Posted

Just a small comparrison pic for those too impatient to wait for real reviews.

For the record, this seems like a pretty sturdy little guy. The only thing I wish is that his cockpit wasn't so huge and inaccurate (I don't mind its presence in battloid) and I wish the hips were stiffer. Otherwise it's solid.

post-659-1229560016_thumb.jpg

Link to comment
Share on other sites
protogarland Cannon Fodder

protogarland

Posted
Posted
Cool, thanks for the review, good to know it's sturdy that's for sure. :) Wonder when the Red beta will come out...

I believe Feb. 2009 is the red beta followed by the Green. From the instruction booklet included with my unit, the characters to be used on the red and green are Annie and Lunk respectively.

Link to comment
Share on other sites
ruskiiVFaussie BOMBA!

ruskiiVFaussie

Posted
Posted (edited)
I believe Feb. 2009 is the red beta followed by the Green. From the instruction booklet included with my unit, the characters to be used on the red and green are Annie and Lunk respectively.

Cool! Thanks for that, maybe if RT.com comes down under for a convention next year, i'll be able to pick one up! :)

Here's a couple of my CM A stance pics of the Tread (front and back), this thread is seriously in DIRE need of some Toynami beta pics!

Jenius!!!!!!!! :lol:

gallery_3118_60_1604917.jpg

gallery_3118_60_2537693.jpg

Edited by ruskiiVFaussie
Link to comment
Share on other sites
ruskiiVFaussie BOMBA!

ruskiiVFaussie

Posted
Posted
These guys are saying it's schedulled for the end of january:

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...em=230314874664

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...em=110327591955

Don't know how reliable this is though.

Wow, that's sure early then, Hmm, i won't have the funds for like 5 months, so it will have to wait lol.

The canopy/cockpit/fighter head looks like a flat fat snake head, compared to the CM. heh. :D

Link to comment
Share on other sites
ruskiiVFaussie BOMBA!

ruskiiVFaussie

Posted
Posted (edited)

Thanks for that! That's good enough for me. :)

Un-biased, i still prefer the CM Tread alot more than the Toynami. But will be awesome to have the Zeta (red) Toynami Tread in my collection! :D

Great time to be a Mospeada fan guys! This year has been fantastic!

Looking at mine and the new pics of the Toynami Beta makes me wanna bust some poses and displays mospeada style! Love my CMS....

Edited by ruskiiVFaussie
Link to comment
Share on other sites
SuperHobo Pineapple Eater

SuperHobo

Posted
Posted
As i said before toynami did very good with this toy and since i have both versions toynami and CM , the toynami one is by far the better one

Funny I never thought I'd hear this " the toynami one is by far the better one". Good to hear the positive reports! Keep it coming guys. Jenius I can't wait for that review. B))

Link to comment
Share on other sites
RavenHawk Pineapple Eater

RavenHawk

Posted
Posted
Thanks.

I had the 4 original BGC poseable figures from Atelier Sai. 2 sets each. But the joint quality isn't good.

After that, I bought the revoltech stuff. Same disappointment. Then I bought the figma stuff. Same issues. Before all these, I had a number of Valks. Same sadness. So far no poseable Japanese toys have good quality joints. (except maybe the poseable dolfies and dollstuff but I won't know since I don't have 1)

So, to cut a long story short, I stopped buying poseable Japanese toys, including the Yamato Motoslaves. (I'm glad I did wait until after the reviews come out, which isn't very positive. Also, as expected from Yamato, they are reissuing the Motoslave, now in a brand new shiny metalic paint scheme. Re-issues in new colors seemed to be Yamato's favourite activity. Just look at their recent Ignis release or their Cobra-Kai sculpted Kanu) :mellow:

Guess I will wait for the recommendations of my peers here in Macrossworld and other figure review sites before plonking down my hard-earned dollars for Yamato's Motoslaves.

Which Revoltechs are you talking about? The busou shinki stuff?

What is the figma stuff?

I'm VERY tempted to get the metallic Yamato motoslaves, since I don't have any BGC figures, though I think they're identical, just different colors (unlike MOSPEADA where we have actual different designs). You'd recommend against the Yamato stuff though?

Link to comment
Share on other sites
ruskiiVFaussie BOMBA!

ruskiiVFaussie

Posted
Posted
Which Revoltechs are you talking about? The busou shinki stuff?

What is the figma stuff?

I'm VERY tempted to get the metallic Yamato motoslaves, since I don't have any BGC figures, though I think they're identical, just different colors (unlike MOSPEADA where we have actual different designs). You'd recommend against the Yamato stuff though?

http://www.hlj.com/scripts/hljlist.cgi - figma

Link to comment
Share on other sites
ruskiiVFaussie BOMBA!

ruskiiVFaussie

Posted
Posted (edited)

ahh s^t sorry i forgot to enter next screen >_<

So who is planning on getting which variant?

I'm tossing on wether to get the blue as well as the red, but i think because it's so expensive, i'll just stay with the Red Tread/Beta.

Are you getting all four Jenius (including Shadow) and SterlingS? :p 5.. geez, that's expensive...

Looking at pics posted, it does look a bit too purply blue than blue compared to the CM....

Edited by ruskiiVFaussie
Link to comment
Share on other sites
Mog SMS Squadron Leader

Mog

Posted
Posted

All I care about is if it color-matches the two MPC Alphas I already got.

I just put down my payment for one, so I'll be getting a Beta soon enough (I preferred not to purchase from RT.com/HG directly).

Once I futz around with it a bit, sticker it up, panel-line it, and finally, FINALLY change my avatar, you know I'll be posting some pics of the big bad Beta in all its glory! ;)

As for your question ruskii, I think I'm gonna stick with the blue bastard. If I'm impressed enough with the Beta, I'll probably buy another blue one (one to display in battloid with the rest of the MPC's and one to leave in fighter combo mode).

Link to comment
Share on other sites
Shun Global's Pipe Holder

Shun

Posted
Posted

Just can't get over that chest. I expect at least some interchangeable part if they can't hide that cockpit. This is the one thing that's stopping me from buying the toynami beta.

Maybe some one can customize it.

So Mog, I hope you keep your avatar. It sure looks nicer. :)

Link to comment
Share on other sites
protostar8 Global's Pipe Holder

protostar8

Posted
Posted
Just can't get over that chest. I expect at least some interchangeable part if they can't hide that cockpit. This is the one thing that's stopping me from buying the toynami beta.

Maybe some one can customize it.

So Mog, I hope you keep your avatar. It sure looks nicer. :)

If I ever buy one, I'm sure as heck going to either make a custom cockpit/hideaway mechanism or just a piece to cover their shitty one. But the price is just so high and I feel like it'll drop soon. If I could get it for $100, I'd buy it and make a custom little part (maybe even send the custom part to someone who could cast more). But as it stands, $150 plus shipping simply b/c Toynami wants the price to be kept artificially high (which should be made illegal considering the US is a capitalist style economy and that is no different than a cartel keeping prices artificially high in my opinion).

Link to comment
Share on other sites
AcroRay Bridge Bunny

AcroRay

Posted
Posted
But as it stands, $150 plus shipping simply b/c Toynami wants the price to be kept artificially high (which should be made illegal considering the US is a capitalist style economy and that is no different than a cartel keeping prices artificially high in my opinion).

You gotta be kidding. So you seriously think $150 is artificially high for a product that large and complex, requiring extensive unique steel tooling sets, diecast tooling, that many different materials elements, time on the assembly line, produced in such a limited quantity, for such a limited, esoteric interest (not even considering the R & D involved)?

Really. I expected the thing to be at least $200. Especially with the current depressed collectors market and the fact that there isn't expected to be a Japanese release.

Link to comment
Share on other sites
do not disturb SMS Squadron Leader

do not disturb

Posted
Posted
You gotta be kidding. So you seriously think $150 is artificially high for a product that large and complex, requiring extensive unique steel tooling sets, diecast tooling, that many different materials elements, time on the assembly line, produced in such a limited quantity, for such a limited, esoteric interest (not even considering the R & D involved)?

Really. I expected the thing to be at least $200. Especially with the current depressed collectors market and the fact that there isn't expected to be a Japanese release.

what up ray! :)

i ask that you look at the beta again.

while its large in size, theres hardly anything i would say is complex about the toy or its design.

its one of the plainest/simplest transforming toys i've seen in a long time.

honestly, yamatos destroid is more complex than toynamis beta and it doesn't even transform.

Link to comment
Share on other sites
Roger Global's Pipe Holder

Roger

Posted
Posted (edited)

Ray, you missed out on this, but when the Beta was originally listed with an SRP of $80 (due to an error in Toynami's price information that was sent to retailers), many people here took that price as gospel, even though it was the exact same SRP that was used for the Alphas. When the error was corrected and the correct price was set ($150), these people started crying foul.

I don't know why those people thought that a toy that was twice the size of the Alpha would cost the same as the Alpha. I guess that in the supermarkets on their planet, two pounds of sugar costs the same as one pound.

I offered a wager to anyone and everyone who would take it: if the Beta's SRP was actually $80, I would buy that person a Beta, no strings attached. Of course, if it turned out to be $150, they would have to buy me one. It's too bad, I could have had some free Betas to share for Christmas. ;p

Edited by Roger
Link to comment
Share on other sites
jenius Super Dimension Member

jenius

Posted
Posted (edited)

Yes Roger, because materials are the only cost of a toy, you're smart and stuff.

I'm with DND, world's simplest toy currently selling for $150. Roger, wanna make a bet that I'll be able to buy it for $80 some day?

Edited by jenius
Link to comment
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing
×
×
  • Create New...