Sgt Nate V Posted June 1, 2021 Share Posted June 1, 2021 A bootleg? A photoshop? A weird fake in general? Quote Link to comment Share on other sites More sharing options...
nightmareB4macross Posted June 1, 2021 Share Posted June 1, 2021 8 minutes ago, Sgt Nate V said: A bootleg? A photoshop? A weird fake in general? It has Takatoku plastered everywhere. Have to do some more research. Quote Link to comment Share on other sites More sharing options...
jvmacross Posted June 1, 2021 Share Posted June 1, 2021 5 hours ago, nightmareB4macross said: It has Takatoku plastered everywhere. How about BW stickers? Nice bootleg....I like it when these Chinese KO guys go out of their way to make some decent boxes Quote Link to comment Share on other sites More sharing options...
nightmareB4macross Posted June 1, 2021 Share Posted June 1, 2021 No BW sticker, but there is a UK Registered Patent Pending No. on the box. Never seen that before. Quote Link to comment Share on other sites More sharing options...
sh9000 Posted June 1, 2021 Share Posted June 1, 2021 I once owned a Taiwan Super Valkyrie that came with that same grey VF-1S. Quote Link to comment Share on other sites More sharing options...
jvmacross Posted June 1, 2021 Share Posted June 1, 2021 1 hour ago, sh9000 said: I once owned a Taiwan Super Valkyrie that came with that same grey VF-1S. Nice....I do like the look of the grey-ish plastic with the DYRL Hikaru-1S paint job more than the actual white used on the legit release Quote Link to comment Share on other sites More sharing options...
nightmareB4macross Posted June 1, 2021 Share Posted June 1, 2021 4 hours ago, jvmacross said: Nice....I do like the look of the grey-ish plastic with the DYRL Hikaru-1S paint job more than the actual white used on the legit release I think the one used in the commercial is actually grey. You can see the difference when the VF-1S and SDF-1 are side by side in the end of the comercial. The one in hand matches color with the one in the box. These VF-1S should have had yellow accent colors, but I guess red was more readily available. Quote Link to comment Share on other sites More sharing options...
Anasazi37 Posted June 1, 2021 Share Posted June 1, 2021 The red diamonds on the lower portions of the shoulders are an odd feature. I've never seen that on 1/55 stickers before. All of the GBP stuff printed on the box is fascinating. Quote Link to comment Share on other sites More sharing options...
nightmareB4macross Posted June 2, 2021 Share Posted June 2, 2021 On 12/28/2020 at 1:46 PM, nightmareB4macross said: This VF-1S GBP-1S appears to be related to these. Quote Link to comment Share on other sites More sharing options...
Anasazi37 Posted June 2, 2021 Share Posted June 2, 2021 1 minute ago, nightmareB4macross said: This VF-1S GBP-1S appears to be related to these. And there are grey and white variants. Huh. Quote Link to comment Share on other sites More sharing options...
sh9000 Posted June 2, 2021 Share Posted June 2, 2021 Pre HMR grey VF-1S right there. I had that exact same one on the bottom. I remember it had paper stickers. Quote Link to comment Share on other sites More sharing options...
glane21 Posted June 2, 2021 Share Posted June 2, 2021 (edited) I think this awesome new bootleg that Alex has uncovered was made by the same factory that did this VF-1S Strike knockoff. Which is also a boot of a gift set that should include armor, they just didn’t include the armor! The box opens from the side just in the same way and it’s the same red-shoulders valkyries inside - just white vs grey. Also, I actually have that SDF-1 that’s in the video along with it and it’s definitely a bootleg. So now I know who made it as well! Great work on another awesome box variant discovery! Edited June 2, 2021 by glane21 Quote Link to comment Share on other sites More sharing options...
jvmacross Posted June 2, 2021 Share Posted June 2, 2021 9 hours ago, glane21 said: I think this awesome new bootleg that Alex has uncovered was made by the same factory that did this VF-1S Strike knockoff. Which is also a boot of a gift set that should include armor, they just didn’t include the armor! The box opens from the side just in the same way and it’s the same red-shoulders valkyries inside - just white vs grey. Also, I actually have that SDF-1 that’s in the video along with it and it’s definitely a bootleg. So now I know who made it as well! Great work on another awesome box variant discovery! Are the bottom of the SDF-1 feet blank or have some sort of mark? Looks like they copied the Matbox version of the SDF-1...or at least the Prometheus and Daedelus. Can you post more pics of the box? Quote Link to comment Share on other sites More sharing options...
glane21 Posted June 2, 2021 Share Posted June 2, 2021 Yeah, it’s the Bandai mold used for Matchbox. They just ground the Bandai name and any copyright info off the bottom of the feet on the molding. You can see and feel the unevenness on that area of the feet where the mold was altered. Otherwise it’s actually of similar quality to the original. Much better than their valk bootleg. Added pics of the box top, sides, back, and the feet bottoms. Quote Link to comment Share on other sites More sharing options...
jvmacross Posted June 2, 2021 Share Posted June 2, 2021 Nice...That one does not come up as often as the trans-robo(?) bootleg...... Quote Link to comment Share on other sites More sharing options...
treatment Posted June 3, 2021 Share Posted June 3, 2021 On 6/1/2021 at 12:21 AM, nightmareB4macross said: It has Takatoku plastered everywhere. Have to do some more research. Nice find! Were these UK/EU-only? It would've been kewl if they were readily available alongside the ubiquitous Joons back in 2000s... Quote Link to comment Share on other sites More sharing options...
nightmareB4macross Posted June 3, 2021 Share Posted June 3, 2021 (edited) 18 minutes ago, treatment said: Nice find! Were these UK/EU-only? It would've been kewl if they were readily available alongside the ubiquitous Joons back in 2000s... The commercial posted previously denotes a China release, per the language spoken. But it is hard to see in the video if this is the exact same box. I still have to research the UK Reg PP No. and provide more insight. Joons had several release years. There might be more production runs than previously thought. Amongst those releases we also had concurrent runs of Space Gan Dam V and Space Fighter. Edited June 3, 2021 by nightmareB4macross Quote Link to comment Share on other sites More sharing options...
nightmareB4macross Posted June 3, 2021 Share Posted June 3, 2021 In the meantime...more EU releases. This time the VF is Valkyrie stamped and the box is TT but Made in Taiwan ROC. Quote Link to comment Share on other sites More sharing options...
treatment Posted June 3, 2021 Share Posted June 3, 2021 (edited) 14 minutes ago, nightmareB4macross said: The commercial posted previously denotes a China release, per the language spoken. But it is hard to see in the video if this is the exact same box. I still have to research the UK Reg PP No. and provide more I sight. Wait. The box on that Hikaru-1S states 1/100. Are the toys actually 1/100 or 1/55? The box could be just the usual run-of-the-mill hk counterfeit printing, so verifying the UK Reg-PP could be just futile exercise... 14 minutes ago, nightmareB4macross said: Joons had several release years. There might be more production runs than previously thought. Amongst those releases we also had concurrent runs of Space Gan Dam V and Space Fighter. Lol! I reckon so. I think the first time I'd ever seen a Joons locally was in its Space Gandam box. Before I'd seen their usual funky color-schemes, iirc. Didn't even know the name "Joons" and its rep back then.. . Edited June 3, 2021 by treatment Quote Link to comment Share on other sites More sharing options...
nightmareB4macross Posted June 3, 2021 Share Posted June 3, 2021 1 minute ago, treatment said: Wait. The box on that Hikaru-1S states 1/100. Are the toys actually 1/100 or 1/55? The box could be just the usual run-of-the-mill hk counterfeit printing, so verifying the UK Reg-PP could be just futile exercise... Or is it a 1/100 Jumbo?!? Seriously, it’s a 1/55. Only by looking deeper we will know. Quote Link to comment Share on other sites More sharing options...
sh9000 Posted June 3, 2021 Share Posted June 3, 2021 The Joons 1/55 red VF-1J can technically be the unofficial Macross 7 VF-1J Milia. Quote Link to comment Share on other sites More sharing options...
nightmareB4macross Posted June 4, 2021 Share Posted June 4, 2021 5 hours ago, sh9000 said: The Joons 1/55 red VF-1J can technically be the unofficial Macross 7 VF-1J Milia. That is a very good point. Quote Link to comment Share on other sites More sharing options...
nightmareB4macross Posted June 4, 2021 Share Posted June 4, 2021 On 6/1/2021 at 9:01 PM, glane21 said: If I remember correctly, the manufacturer is Nikky out of Taiwan. Quote Link to comment Share on other sites More sharing options...
jvmacross Posted June 4, 2021 Share Posted June 4, 2021 10 hours ago, nightmareB4macross said: If I remember correctly, the manufacturer is Nikky out of Taiwan. That should provide you with info on the VF-1S GBP...probably also a Taiwanese bootleg..... It's funny how Takatoku opened the door to having their 1/55 mass-copied for years to come by allowing it to be made in Taiwan...LOL....or would that have been Matsushiro's decision? Quote Link to comment Share on other sites More sharing options...
nightmareB4macross Posted June 4, 2021 Share Posted June 4, 2021 It might have all been done without Takatoku’s or Matsushiro’s approval. Most of the molds auctioned off and ended up in various places of China and Korea. Only official molds remained in Japan with Matsushiro/Bandai and Macau for MB TF Jetfire. It’s amazing that there are about 70 or so VF-1 out there from the Takatoku boxes thru blister packed versions. Quote Link to comment Share on other sites More sharing options...
no3Ljm Posted June 4, 2021 Share Posted June 4, 2021 So much Chunky KO's and bootlegs back then and I wasn't able to own one. Quote Link to comment Share on other sites More sharing options...
nightmareB4macross Posted June 5, 2021 Share Posted June 5, 2021 4 hours ago, no3Ljm said: So much Chunky KO's and bootlegs back then and I wasn't able to own one. These are still being sold to this day. Latest 2021 edition. Quote Link to comment Share on other sites More sharing options...
pengbuzz Posted June 5, 2021 Share Posted June 5, 2021 8 minutes ago, nightmareB4macross said: These are still being sold to this day. Latest 2021 edition. Wish i could find one; I could use the gun pod... Quote Link to comment Share on other sites More sharing options...
nightmareB4macross Posted June 5, 2021 Share Posted June 5, 2021 19 hours ago, pengbuzz said: Wish i could find one; I could use the gun pod... I think you would be better off finding a TF Jetfire gun as these KOs are getting expensive. Last I saw these versions sold for about 50-75. Quote Link to comment Share on other sites More sharing options...
sqidd Posted August 8, 2021 Share Posted August 8, 2021 I thought this was interesting. I saw this o FB. Looks like he did a re-pop of the Strike Cannon. The price doesn't seem completely unreasonable. But only paying as a gift does. Here is the verbiage: Macross minmay guard 1/55 custom 👉🏻Sale 💥💥Price 💥💥350USD 🔥 +free!! Worldwide shipping Time 14-20 days The robot is adapted from a used macross robot, please understand that it is not new. This macross can Perfect transformation in all 3 mode Some of the materials were remade and colored injected into the armor. and put a pattern with 2k varnish extend shelf life Backpack armor will not be used due to modifications to the installation. for more tightness With aluminum core material (as in the picture), but can also remove the armor obtained by tightening the screw ----- **accept Type "Persanal Payment " only not accept Type "Goods and services" ----- Thank you😊😊 Quote Link to comment Share on other sites More sharing options...
Slave IV Posted August 8, 2021 Share Posted August 8, 2021 2 hours ago, sqidd said: I thought this was interesting. I saw this o FB. Looks like he did a re-pop of the Strike Cannon. The price doesn't seem completely unreasonable. But only paying as a gift does. Here is the verbiage: Macross minmay guard 1/55 custom 👉🏻Sale 💥💥Price 💥💥350USD 🔥 +free!! Worldwide shipping Time 14-20 days The robot is adapted from a used macross robot, please understand that it is not new. This macross can Perfect transformation in all 3 mode Some of the materials were remade and colored injected into the armor. and put a pattern with 2k varnish extend shelf life Backpack armor will not be used due to modifications to the installation. for more tightness With aluminum core material (as in the picture), but can also remove the armor obtained by tightening the screw ----- **accept Type "Persanal Payment " only not accept Type "Goods and services" ----- Thank you😊😊 Pretty cool! Quote Link to comment Share on other sites More sharing options...
DYRL VF-1S Posted August 8, 2021 Share Posted August 8, 2021 2 hours ago, sqidd said: I thought this was interesting. I saw this o FB. Looks like he did a re-pop of the Strike Cannon. The price doesn't seem completely unreasonable. But only paying as a gift does. Here is the verbiage: Macross minmay guard 1/55 custom 👉🏻Sale 💥💥Price 💥💥350USD 🔥 +free!! Worldwide shipping Time 14-20 days The robot is adapted from a used macross robot, please understand that it is not new. This macross can Perfect transformation in all 3 mode Some of the materials were remade and colored injected into the armor. and put a pattern with 2k varnish extend shelf life Backpack armor will not be used due to modifications to the installation. for more tightness With aluminum core material (as in the picture), but can also remove the armor obtained by tightening the screw ----- **accept Type "Persanal Payment " only not accept Type "Goods and services" ----- Thank you😊😊 1 minute ago, Slave IV said: Pretty cool! I bought my custom VF1D Chunky from him. Solid work. Quote Link to comment Share on other sites More sharing options...
sqidd Posted August 8, 2021 Share Posted August 8, 2021 7 minutes ago, DYRL VF-1S said: I bought my custom VF1D Chunky from him. Solid work. Did you pay him with F&F? Quote Link to comment Share on other sites More sharing options...
DYRL VF-1S Posted August 9, 2021 Share Posted August 9, 2021 30 minutes ago, sqidd said: Did you pay him with F&F? I did because I’m a crazy MoFo but he delivered. Sent me pics of shipment etc. And arrived in good shape. Quote Link to comment Share on other sites More sharing options...
jvmacross Posted August 9, 2021 Share Posted August 9, 2021 2 hours ago, DYRL VF-1S said: I bought my custom VF1D Chunky from him. Solid work. Have you posted pics of it? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.