ychanus

I heard somewhere said that when using some type of paint thinner on plastic could damage the plastic and making it more brittle? I have been cleaning my 1/48 valk with alcohol; and when I fill the panel line using a Gundam marker, I use alcohol to wipe the spill over clean. Now, I'm worrying about that I'have been damaging the plastic or making it more brittle. I wonder if anyone have any experience on this issue.

I hope it doesn't end up like the Yamato escaflowne transformable toy that was so floppy and flimsy.

You should just get a used Jap PS2 as a lot of people are dumpping their Big ps2 for the slim version. Also, you can get OYW PS2 for like $12.90 from play-asia.com, it is a steal.. If you like seed, you must play Fed vs Zaft Seed PS2 as it is awesome. Just getting a chance to pilot freedom Gundam and perform a full power shot will make you feel really good.

This is off topic, but I'll throw my impression. It is now only released in Japan for PSP, I have finished all fed mode missions. My impression was not that great as on later missions, there are a lot of slow down. Particularly the mission where 3 Dom were trying to get me at once, the slowdown caused the control become extremely unresponsive. I still think OneYearWar for PS2 from Namco is the best Gundam game. I guess I like to do the aiming myself instead of just a simple autolock function. As for seed Gundam game, fed vs Zaft is the best, period.

No, I think Hell and Heaven is possible, check the bottom page pictures from the link in the first post.

What would you choose? Voltron MP Vs GaoGaiGar Genesis Final Transformable.

Anyone going to get that? I wonder how is the poseability? Does it worth the price tag of $180+/-.. I wonder if it will become a rare item later.. Here is a link to some pictures. http://licos.web.infoseek.co.jp/mia/other/...index.html#GGGG

Man-o-man... thanks for the heads up on this, I just bought two 1/144 METEOR/Freedom kits! 360591[/snapback] Yeah, I bought quite a few kits too like MG MK-II 2.0 and MG freedom, etc.. A lot of them are sold out, so hurry!

Bigbadtoystore has a lot of gunpla with 40% off. Just a headsup..

I really like your work, can you post some high res full body shots?

I like to be able to side step too, but it will either make the game too easy (unless the zombies can move faster) or the gameplay will just end up like any other FPS games. I think that's probably why CAPCOM leave the game this way.

Is it me or your Strike Freedom's head V attenna doesn't seem to align with the head correctly in the picture.. I remember my Rx-78 Hcmpro has the same problem.

Just to let you guys know that I just got my Gundam Ka Fix from HLJ. Quick impression: Bad: Usual GFF QC problem in the head that the helmet does not aligned correctly when attached with the face. Good part: the MOST poseable GFF I have ever had, the shoulder is amazing for a GFF.

Is the first one any good? worth 50-60 bucks price tag?

Very clear, thanks for your help!!

The third line, did you mean.. enamel base: either acrylic or enamel is ok on top, Lacquer will desolve the enamel base color Please let me know.

If I use lacquer base paint for the first layer, can I spray enamel base paint on top of that? Or must I have to stick with the same type? What about the other way around? Used Enamel type on the first layer and then use Lacquer base for the second layer on top of that. Does Lacquer base react with Enamel type paint even though they are completely dry? Please help as I'm worry that I may mess up my project.

I got the reply from the site, and they said that tes1960 in an enamel spray while the tes1260 is a lacquer. What is the difference between lacquer base and enamel? Is one particularly stronger? Say, if I use Lacquer base color to paint the model and used lacquer base clear dullcote to give it a flat surface, they are going to react each other and ruin the previous paint layer, right? And is it the same for enamel paints?? Therefore, I need to use different type of paint other than the type that was on top of the surface currently. Please let me know.

I got mine today and it IS the PG Zaku, the packaging is ok with a big box and air bags. Can't beat that price, and now I have another model in my long backlog queue.

I actually like it a lot, but I wasn't trying to compare it with Anime or manga version. The story was good as it covered all the major plots in anime that I thought were good. Most of the race scenes were good. And in some parts, the show creates a lot of very funny moments. I speak cantonese so I can understand the whole movie fully, and that I believe that become a problem with non-cantonese speaking world. BTW, I hate the music, it is so bad....

Thanks for the reply, so what is the difference between the two clear flat spray cans I found? If I don't want it to be too dull, can I use this? http://www.hobbylinc.com/htm/tes/tes1959.htm Clear Satin Finish Spray. Thanks!

I'm looking for a flat clear coat spray can that spray directly on the plastic surface of a toy or model that gives a flat finish to cover up the plastic looking color. I found 2 spray paint from testers. http://www.hobbylinc.com/htm/tes/tes1960.htm Clear Flat Finish Spray AND http://www.hobbylinc.com/htm/tes/tes1260.htm Dullcote Spray Which on should I use?? Or am I supposed to spray a gloss clear first and then spray the flat to make sure it is not too flat?? Please help.

It is very interesting to see that they still have the PG zaku kit available. I remember when PG Wing was 20 bucks, it sold out in a few hours. Is Zaku that unpopular? despite its PG kit being this cheap.

Somebody posted a review of the PG Zaku kit at Amazon.com and said it is weapon pack instead of the actual PG Zaku kit. I wonder if he is B.S.ing. Or if it is true.... Whoever get it please post if they are real, mine won't come until Wednesday the 10th.

minus the panel line in the link if u don't paint.